• Please read carefully and thoroughly this manual before operating this unit. • Contact the authorized SVC man for repair or maintenance of this unit. • Contact the installer for installation of this unit. • The appliance is not intended for use by young children or infirm persons without supervision. • Young children should be supervised to ensure that they do not play with the appliance.
Safety Precautions Safety precautions Safety Precautions Warning ................................2 Caution .................................3 Operating Instructions Preparation before operation ..4 Remote Control Features .....5 Operation Mode Selection ......6 Operating Instructions Additional features..............13 Care and Maintenance To prevent injury and property damage, follow these instructions.
• It may cause explosion, fire and, burn. Do not disassemble or modify products randomly. • It may cause failure and electric shock. CAUTION CAUTION • They are sharp and may cause injury. When cleaning the unit, first make sure the power and breaker are turned off. • Since the fan rotates at high speed during operation, it may cause injury. • Water may enter the unit and degrade the insulation. It may cause an electric shock. Do not put a pet or house plant where it will be exposed to direct air flow.
Safety Precautions Operating Instructions Care and Maintenance Preparation before operation How to Insert the Batteries Remove the battery cover by pulling it according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are installed correctly. Reattach the cover by sliding it back into position. NOTES: • Use 2 AAA(1.5volt) batteries. Do not use rechargeable batteries. Storage and Tips For Using the Remote Control • The remote control may be stored mounted on a wall.
The remote control transmits the signals to the system. START/STOP BUTTON Operation starts when this button is pressed and stops when the button is pressed again. 2 OPERATION MODE SELECTION BUTTON Used to select the operation mode. 3 ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. 4 INDOOR FAN SPEED SELECTOR Used to select fan speed in four steps low, medium, high and CHAOS.
Cooling Operation Troubleshooting Tips Care and Maintenance Operating Instructions Safety Precautions How to use the Operation Mode Selection button 6 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling 3 Healthy Dehumidification Heating (Heat pump model only) The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions Healthy Dehumidification Operation 8 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Healthy Dehumidification Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Heating Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling ON Healthy Dehumidification Heating (Heat pump model only) Close the door on the remote control. Set the temperature higher than the room temperature. The temperature can be set within a range of 16°C~30°C in 1°C increments.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions Jet Cool/Heating Operation 10 1 Press the Start/Stop button. The unit will respond with a beep. 2 Press the Jet cool/Heat button to operate the speed cooling/heating mode and the unit will operate in super high fan speed on cooling/heating mode for 30 minutes.
Open the door on the remote control. Press the PLASMA air purifying operation ON/OFF button. Operation will start when the button is pressed and stop when the button is pressed again. 3 Set the fan speed again with door of the remote control closed. You can select the fan speed in four steps-low, medium, high or CHAOS. Each time the button is pressed, the fan speed mode is shifted. ✴ Air purifying operation (PLASMA) can be with cooling, Heating or any other operations.
Safety Precautions Care and Maintenance Operating Instructions 2nd F Operation 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door of the remote control and press the 2nd Function button to operate functions printed in blue at bottom of buttons. (Check the indication of 2nd function on remote control display.
Press the Sleep Mode Auto button to set the time you want the unit to turn off automatically. 2 The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner. 3 To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star ( ) disappears from the operation display.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips 14 Airflow Direction Control The up/down and right/left airflow can be adjusted by using the remote control. Press the Start/Stop button to start the unit. Press Chaos Swing button and the louvers will swing. Press the button again and the louvers will stop. After 30 minutes, the louvers return to the maximum airflow position automatically. Air Circulation Mode Circulates the room air without cooling or heating.
Operation procedures when the remote control can't be used. The operation will be started if the power button is pressed. If you want to stop operation, re-press the button. Power Button Operating mode Indoor FAN Speed Setting Temperature Cooling High 22°C Room Temp. ≥ 24°C Heat pump Model 21°C ≤ Room Temp. < 24°C Room Temp.
CAUTION: Before performing any maintenance, turn off the main power to the system. Indoor Unit Grille, Case, and Remote Control • Water hotter than 40°C. Could cause deformation and/or discoloration. • Volatile substances Could damage the surfaces of the air conditioner. NOTE: Supply power must be disconnected before cleaning the indoor unit.
ENGLISH Cleaning of Purifying Filter • Recomended use period : About 3 months 1 Slide down the bottom panel. 2 Bend and pull off the 4th panel. (Rib of the panel off the hole.) 3 Remove the Air Filter then pull of the plasma purifier. 5 Relocate dried Plasma Purifier and Air Filter. 4 Put in Plasma Filters in the neutral detergent for 1~2 hours and then raise them. 6 Put in the 4th panel then slide up the bottom panel.
Safety Precautions When the air conditioner is not going to be used for a long time. When air conditioner is not going to be used for a long time. When the air conditioner is to be used again. Operate the air conditioner on Air circulation mode (Refer to page 14) for 2 to 3 hours. Clean the air filter and install it in the indoor unit. (Refer to page 16 for cleaning filters.) Troubleshooting Tips Care and Maintenance Operating Instructions • This will dry out the internal mechanisms.
Before you call for service... Troubleshooting Tips! Save time and money! Case Explanation See page The air conditioner does not operate. • Have you made a mistake in timer operation? • Has the fuse blown or has the circuit breaker been tripped? 13 It seems that condensation is leaking from the air conditioner. • Condensation occurs when the airflow from the air conditioner cools the warm room air. Air conditioner does not operate for about 3 minutes when restarted.
Memo 20
P/No.: 3828A20149X Printed in Korea After reading this manual, keep it in a place easily accessible to the user for future reference.