USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. webOS3.0 www.lg.
ENGLISH TABLE OF CONTENTS USER SETTINGS....................... 3 -- Main Menu Settings.................................. 3 Picture Settings Sound Settings Network Settings General Settings ENTERTAINMENT................... 14 IR CODES................................ 34 TO CONTROL MULTIPLE PRODUCTS............................. 36 -- Connecting the Cable............................. 36 -- Communication Parameter..................... 37 -- Command Reference List.......................
yy The software-related contents may be changed without prior notice due to upgrade of the product functions. yy Some features described in the User Guide may not be supported in certain models. yy SNMP 2.0 is supported. USER SETTINGS Main Menu Settings Picture Settings To Select Picture Mode / Picture Picture Mode Settings Picture Mode Select the picture mode that is best suited to the video type.
To fine-tune the picture mode ENGLISH SETTINGS / Picture Picture Mode Settings Customize yy Backlight/OLED LIGHT: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. yy Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is. yy Brightness: adjusts the overall brightness of the screen.
yy Picture Options: customizes the picture options. NOTE yy You can adjust advanced settings only in the User mode. yy Depending upon the input signal or the selected picture mode, the available options may differ. To set the aspect ratio, (Some features may not be supported in certain models.) SETTINGS / Picture Aspect Ratio Changes the aspect ratio to view the image in its optimal size. yy 16:9: displays the image with a 16:9 aspect ratio.
To use the Energy Saving function ENGLISH SETTINGS / Picture Energy Saving Reduces power consumption by adjusting peak screen brightness. yy Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only with certain models.) yy Off: disables the Energy Saving mode. yy Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level specified for your monitor. yy Screen Off: turns off the screen. You will only hear audio.
Sound Settings ENGLISH yy Only applies to certain models. To select a Sound Mode SETTINGS / Sound Sound Mode The best sound quality will be selected automatically depending on the video type currently being watched. yy Standard: this sound mode works well for content of all types. yy Cinema: optimizes sound for watching movies. yy Clear Voice III: Enhances voices so they can be heard more clearly. yy Sports: optimizes sound for watching sports. yy Music: optimizes sound for listening to music.
Selecting Sound Output Device ENGLISH SETTINGS / Sound Sound Out yy Signage Speaker: You can output sound through the signage monitor’s internal speakers. This feature is available only for models with built-in signage speakers. yy LG Sound Sync / Bluetooth: You can connect Bluetooth audio devices or Bluetooth headsets wirelessly to enjoy richer sound from the signage monitor conveniently.
Network Settings SETTINGS / Network Signage Name You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Wired Network SETTINGS / Network Wired Connection (Ethernet) yy Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port, and configure the network settings. Only wired network connections are supported.
Wi-Fi connection. Up to 10 devices are supported. ENGLISH Tips for Network Setting yy Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display. yy Many network connection problems during set-up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem, then power on and/or connect the power cable again.
General Settings SETTINGS / General Menu Language Select one of the languages on the menu displayed on the screen. yy Menu Language: sets a language for Signage. Setting up the keyboard language SETTINGS / General Keyboard Languages Select the language you wish to show on the keyboard. yy Keyboard Languages: Sets the keyboard language. To set the time/date SETTINGS / General Time & Date You can check or change the time. yy Set Automatically: You can set Time and Date.
Configuring Set ID ENGLISH SETTINGS / General Set ID yy Set ID (1 to 1000): Assigns a unique Set ID number to each product when several products are connected for display. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately by using the Set ID you assigned to each product. yy Auto Set ID: Automatically assigns a unique Set ID number to each set when several products are connected for display. yy Reset Set ID: Resets the Set ID of the product to 1.
Configuring the Dual-View Screen SETTINGS / General Dual-View Screen Setting yy Front Screen Name: Sets the name of the front screen. yy Back Screen Name: Sets the name of the back screen. yy Screen Swap: Swaps the images on the front and back side of the screens. yy Screen Mirroring: Copies the image of the current screen to the opposite screen. yy Screen Off: Turns off the front or back screen. yy Clone All Settings: Copies all settings for the front screen to those for the back screen.
ENGLISH ENTERTAINMENT Using Multimedia Features Connecting USB/SD Storage Devices Connect a USB storage device such as a USB flash memory, SD storage devices or an external hard drive to the display and use multimedia features. CAUTION yy Do not turn the monitor off or remove the USB storage device while Photo & Video or Music is playing. yy Back up files you have saved on a USB storage device frequently, as loss or damage to the files may be not covered by the warranty.
Tips for using USB/SD storage devices ENGLISH yy Only a USB storage device can be recognized. yy A USB device does not work effectively when it is connected via a USB hub. yy A USB storage device using an automatic recognition program may not be recognized. yy A USB storage device using its own driver may not be recognized. yy The recognition speed of a USB storage device may depend on each device.
ENGLISH Photo & Video yy The photo feature is not supported in OLED models. Supported Photo & Video Files Supported External Subtitle Format yy *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) NOTE yy Subtitles are not supported in certain models. yy Embedded subtitles are not supported. Supported Video Codecs Extension Codec .asf Video VC-1 Advanced Profile (excluding WMVA), VC-1 Simple and Main Profiles .
Supported Photo File Format JPEG Item yy Minimum : 64 x 64 yy Maximum - Normal Type: 15360 (W) x 8640 (H) - Progressive Type: 1920 (W) x 1440 (H) .png PNG .
ENGLISH Viewing Photos and Videos HOME / 1 2 Select your desired storage device. Select and view your desired photo or video. Tips for Playing Video Files yy Some user-created subtitles may not work properly. yy Some special characters in subtitles are not rendered. yy HTML tags are not supported in subtitles. yy Subtitles in languages other than the supported languages are not available. yy The screen may suffer temporary interruptions (image stoppage, faster playback, etc.
Scheduled Playing You can schedule your selected content to play at a certain time. (Scheduled playing is available with external inputs.) HOME / 1 2 3 4 5 6 Select your desired storage device. Enter the folder that contains the file you wish to schedule. Click the NEW SCHEDULED PLAYING button in the upper right. Select the content that you would like to schedule to play. Enter schedule details to create a new schedule. Watch your selected content play at the set time.
ENGLISH Music Supported Music Files File Format .mp3 .wav .ogg .wma Item Information Bit rate 32 Kbps to 320 Kbps Sample freq. 16 KHz to 48 KHz Support MPEG1, MPEG2 Channels Mono, Stereo Bit rate - Sample freq. 8 kHz to 48 kHz Support PCM Channels Mono, Stereo Bit rate 64 Kbps to 320 Kbps Sample freq. 8 kHz to 48 kHz Support Vorbis Channels Mono, Stereo Bit rate 128 Kbps to 320 Kbps Sample freq.
Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option HOME / Only contents distributed by SuperSign Manager are displayed and selectable. If there is a USB/SD storage device connected, the image on the USB/SD device is outputted additionally. NOTE yy If a folder named normal or AutoPlay exists on the USB/SD card and there are playable files, the files will play automatically when the USB/SD card is connected.
ENGLISH Local Contents Scheduler yy Only applies to certain models. Setting a Scheduled Playing You can create a scheduled playing using the Local Contents Scheduler and the Photo & Video app. Scheduled Playing with Photo & Video yy 1st Method: Refer to the scheduled playing section in Photo & Video app. yy 2nd Method: HOME / 1 2 3 4 5 6 Press the NEW SCHEDULED PLAYING button in the upper right. Press the LOCAL CONTENTS button. Select the storage device that you would like to schedule to play.
yy Only applies to certain models. Allows the screens of devices such as a mobile device or Windows PC to be displayed on the monitor via wireless connections such as WiDi or Miracast. Using Screen Share HOME / 1 2 Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right. Once the connection is established, Screen Share between the user device and the monitor is enabled.
ENGLISH Group Manager yy Only applies to certain models. Using this template-based content editing program, you can produce, manage and play content. There are three modes: Master, Slave and StandAlone. The program can be used to distribute and play schedules between the Master and Slave. It also provides access from mobile device or PC. CAUTION yy A maximum of 5,000 images stored on a USB drive/SD card can be displayed from your PC or mobile device.
yy If you use a mobile device, you need to go through an authorization process using a PIN code. The default PIN code is ‘0000’. yy When using a PC, use the full screen (F11) feature in 1920 x 1080 (Full HD) resolution to view the same screen as the monitor. yy To delete a distributed schedule, disable the schedule and redistribute. Supported Photo Files File Format Format jpeg, jpg JPEG .
ENGLISH Leveler Tool yy Only applies to certain models. You can check whether the product is horizontally and vertically level when installing the product outdoors in an enclosure. Accessing the Leveler Tool HOME / You can check whether the product is horizontally and vertically level. Exiting the Leveler Tool Exit the Leveler Tool by pressing the EXIT key on your remote control.
yy Only applies to certain models. You can control and check the status of the display through web browser. This function is available on PC and mobile device.
How to Use ENGLISH On a PC 1 Enter ‘https://Product IP address:3737’ in the browser's address bar to access the Control Manager login page. 2 Enter the password in the Password window (The default password is ‘000000’). 3 Click the Login button after entering the password to access the Dashboard. 4 Click the face-shaped image to access the User Menu (Change Password, Logout).
On Chrome 1 Click ADVANCED 2 Click Proceed to product IP address (unsafe) ENGLISH Follow the steps below if you encounter issues with your security certificate while attempting to access.
On FireFox ENGLISH 1 Click Advanced 2 Click Add Exception...
On Internet Explorer Click Continue to this website (not recommended). *The text of the links and buttons may differ depending on the OS (Operating System) or language settings used.
ENGLISH Multi-Screen yy Only applies to certain models. This feature allows you to view multiple external inputs and videos on a single screen. Accessing Multi-Screen HOME / Enter Multi-screen to select the screen layout. NOTE Changing Screen Input Press the button on the top right of each split screen to select the desired input. NOTE yy Inputs which have already been selected for other split screens cannot be selected again.
NOTE yy Only applies to certain models. PICTURE ID is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. If you assign the PICTURE ID using the remote control, only displays with matching PICTURE ID and Set ID can be controlled remotely.
ENGLISH IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model.
Code (Hex) Function Remarks TILE Remote control button 5B EXIT Remote control button 72 PICTURE ID ON (RED) Remote control button 71 PICTURE ID OFF (GREEN) Remote control button 63 YELLOW Remote control Button 61 BLUE Remote control button B1 Remote control button B0 Remote control button BA Remote control button 8F Remote control button 8E Remote control button 5F W.BAL Remote control button 3F S.
ENGLISH TO CONTROL MULTIPLE PRODUCTS yy Only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable yy The image may be different according to the model. Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product.
Baud Rate: 9600 BPS Data Length: 8 bit Parity Bit: None Stop Bit: 1 bit Flow Control: None Communication Code: ASCII code NOTE yy When using three-wire connections (nonstandard), an IR daisy chain cannot be used. yy Be sure to only use the provided gender to connect properly. yy When monitors connected via Daisy Chain (that controls multiple monitors) are turned off and on successively, some monitors may not turn on.
ENGLISH Command Reference List COMMAND DATA 1 2 (Hexadecimal) 01 Power k a 00 to 01 02 Select input x b See Select Input 03 Aspect Ratio k c See Aspect Ratio 04 Energy Saving j q See Energy Saving 05 Picture Mode d x See Picture Mode 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 Sharpness k k 00 to 32 09 Color k i 00 to 64 10 Tint k j 00 to 64 11 Color temperature x u 00 to 64 12 Balance k t 00 to 64 13 Sound Mode d y See Sou
COMMAND DATA 2 (Hexadecimal) 39 Screen off k d 00 to 01 40 Tile Mode d d 00 to FF 41 Check Tile Mode d z FF 42 Tile ID d i See Tile ID 43 Natural Mode d j 00 to 01 44 DPM Select f j 00 to 07 45 Remote Control/Local Key Lock k m 00 to 01 46 Power On Delay f h 00 to FA 47 Fail Over Select m i 00 to 02 48 Fail Over Input Select m j See Fail Over Input Select 49 IR Operation t p 00 to 02 50 Local Key Operation t o 00 to 02 51 Check the status s
COMMAND DATA ENGLISH 1 2 (Hexadecimal) 76 Aspect Ratio(Rotation) s n, 89 00 to 01 77 Easy Brightness Control Mode s m 00 to 01 78 Easy Brightness Control Schedule s s See Easy Brightness Control Schedule 79 MultiScreen Mode & Input x c See MultiScreen Mode & Input 80 Aspect Ratio(MultiScreen) x d See Aspect Ratio(MultiScreen) 81 Screen Mute(MultiScreen) x e See Screen Mute(MultiScreen) 82 Screen Off Always s n, 0d 00 to 01 83 Screen Video Freeze k x 00 to 01
Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes. * [Command2]: controls monitor sets. * [Set ID]: U sed for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000(01H~3E8H) under Settings in the OSD menu. Selecting ‘00H’ for Set ID allows the simultaneous control of all connected monitors. (The maximum value may differ depending on the model.
ENGLISH 01. Power (Command: k a) Controls the power on/off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] *The acknowledgement signal is returned properly only when the monitor is fully powered on. * There may be a delay between the transmission and acknowledgement signals. 02. Select Input (Command: x b) Selects an input signal.
08. Sharpness (Command: k k) Adjusts the screen sharpness. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Data 00: Vivid 01: Standard 02: Cinema 03: Sports 04: Game 05: Expert 1 06: Expert 2 08: APS 09: Photos 10: Touch 11: Calibration Acknowledgement [x][ ][Set ID][ ][OK/NG][Data][x] * Depending on the model, some picture modes may not be supported. 06. Contrast (Command: k g) Adjusts the screen contrast.
ENGLISH 12. Balance (Command: k t) Adjusts the sound balance. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data 00 to 64: left 50 to right 50 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] Transmission [k][f ][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 Acknowledgement [f ][ ][Set ID][ ][OK/NG][Data][x] * It may not be supported depending on the model. * It may not be supported depending on the model. 16.
20. Off Timer (Repeat/Time) (Command: f e) Configures Off Timer (Repeat/Time) settings. Transmission [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data Data1 1. f1h to f7h (reading data) F1: reads the 1st Off Timer data F2: reads the 2nd Off Timer data F3: reads the 3rd Off Timer data F4: reads the 4th Off Timer data F5: reads the 5th Off Timer data F6: reads the 6th Off Timer data F7: reads the 7th Off Timer data 2.
ENGLISH 21. On timer (Repeat/Time) (Command: f d) Configures On Timer (Repeat/Time) settings. Transmission [f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. f1h to f7h (reading data) F1: reads the 1st On Timer data F2: reads the 2nd On Timer data F3: reads the 3rd On Timer data F4: reads the 4th On Timer data F5: reads the 5th On Timer data F6: reads the 6th On Timer data F7: reads the 7th On Timer data 2.
Data 00: Off 01: On Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 24. Auto Power Off (4 Hours) (Command: m n) Sets the monitor to enter Auto Power Off after 4 hours. Transmission [m][n][ ][Set ID][ ][Data][Cr] Data 00: Off 01: 4 hours Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] 25. Language (Command: f i) Sets the OSD language.
ENGLISH 26. Reset (Command: f k) Performs the reset function. Screen Reset can only be performed in RGB input mode. Transmission [f ][k][ ][Set ID][ ][Data][Cr] Data 00: Picture Reset 01: Screen reset 02: Initial Settings Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 29. Time Elapsed (Command: d l) Checks the elapsed time. Transmission [d][l][ ][Set ID][ ][Data][Cr] Data FF: Read status Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] * The data received is shown as a hexadecimal value.
Data 00 to FE: Green Gain 0 to 254 FF: checks the green gain value Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] 34. White Balance Blue Gain (Command: j o) Adjusts the white balance blue gain value. Transmission [j][o][ ][Set ID][ ][Data][Cr] Data 00 to FE: Blue Gain 0 to 254 FF: checks the blue gain value Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x] 35. White Balance Red Offset (Command: s x) Adjusts the white balance red offset value.
ENGLISH 39. Screen Off (Command: k d) Turns the screen on or off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: turns the screen on 01: turns the screen off Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] ** This may not be supported on some models. ** Dual-screen models must use the screen off commands in 88. Dual Screen Off. 40. Tile Mode (Command: d d) Sets the Tile Mode and sets values for the tile rows and columns.
Data 00: Off (Lock Off) 01: On (Lock On) * When the monitor is turned off, the power key works even in On (01) mode. Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 46. Power On Delay (Command: f h) Sets the schedule delay when the power turns on. (unit: seconds). Transmission [f ][h][ ][Set ID][ ][Data][Cr] Data 00 to FA: min. 0 to maximum 250 (seconds) * The maximum value may differ depending on the model. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x 47.
ENGLISH 49. IR Operation (Command: t p) Configures the IR operation settings of the product. Transmission [t][p][ ][Set ID][ ][Data][Cr] 00: locks off all of the keys 01: locks on all of the keys except the Power key 02: locks on all of the keys Acknowledgement [x][ ][Set ID][ ][OK/NG][Data][x] Data: Data1 Data * When the monitor is turned off, the power key works even in the locks on all of the keys (02) mode. 50.
Data 00: Off 01: On Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] 55. PM Mode (Command: s n, 0c) Selects the desired PM mode option. Transmission [s][n][ ][Set ID][ ][0c][ ][Data][Cr] Data ** It may not be supported depending on the model. 00: Sets the Power Off mode. 01: Sets the Sustain Aspect Ratio mode. 02: Sets the Screen Off mode. 03: Sets the Screen Off Always mode. 04: Sets the Screen Off & Backlight mode (Outdoor mode) Acknowledgement [n][ ][Set ID][ ][OK/NG][0c][Data][x] 53.
ENGLISH 57. Network Settings (Command: s n, 80 or 81 or 82) Configures network and DNS settings. Transmission [s][n][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ] [Data5][Cr] Data1 80: Configures/views the temporary IP mode (Auto/Manual), subnet mask, and gateway. 81: Configures/views the temporary DNS address. 82: Saves temporary settings and views information about the current network.
Data 63. Wake On LAN (Command: f w) Selects the desired Wake On LAN option. Transmission [f ][w][ ][Set ID][ ][Data][Cr] Data 00-64: Min -50 (Down) to Max 50 (Up) Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 00: Off 01: On Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] * It may not be supported depending on the model. 61. H Size (Command: f s) Adjusts the horizontal size of the screen. This feature only works when the Tile Mode is set to Off.
ENGLISH 66. Reset to Initial Settings (Command: t n) Enables/disables the Reset to Initial settings. Transmission [t][n][ ][Set ID][ ][Data] [Cr] 69. Pivot Mode (Command: t a) Sets Pivot Mode to on/off. Transmission [t][a][ ][Set ID][ ][Data][Cr] Data Data 00: Disables the settings. 01: Enables the settings. Acknowledgement [n][ ][Set ID][ ][OK/NG][Data] [x] * It may not be supported depending on the model.
77. Easy Brightness Control Mode (Command: s m) Selects whether to turn on/off Easy Brightness Control Mode. Transmission [s][m][ ][Set ID][ ][Data][Cr] Data Data 00: Easy Brightness Control off 01: Easy Brightness Control on * This feature does not work if the current time is not set. 00: Clock 01: Clock+DATA Acknowledgement [n][ ][Set ID][ ][OK/NG][0][b][Data][x] * This feature may not be supported in certain models. 74. Scan Inversion (Command: s n, 87) Sets Scan Inversion to on/off.
ENGLISH 78. Easy Brightness Control Schedule (Command: s s) Sets Easy Brightness Control schedules. Transmission [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1.
Data1 01: Controls the Main input 02: Controls the Sub1 input 03: Controls the Sub2 input 04: Controls the Sub3 input Data2 00: Turns the screen on. 01: Turns the screen off. * This function works when the Multi Screen App is running. ** This function may not work properly if there is no signal. Acknowledgement [e][ ][Set ID][ ][OK/NG][Data1][Data2][x] 84. Wireless Wake-on-LAN (Command: s n, 90) Sets Wireless Wake-on-LAN.
ENGLISH 87. Holiday Schedule (Command: s n, 1b) Configures the Holiday Schedule. Transmission [s][n][ ][Set ID] ][ ][1][a] [ ][Data1][ ][Data2][ ][Data3] [ ][Data4] [Cr] Data1 1. f1–f7 (Data Reading Functions) f1: Reads data of 1st Holiday Schedule f2: Reads data of 2nd Holiday Schedule f3: Reads data of 3rd Holiday Schedule f4: Reads data of 4th Holiday Schedule f5: Reads data of 5th Holiday Schedule f6: Reads data of 6th Holiday Schedule f7: Reads data of 7th Holiday Schedule 2.
Acknowledgement [u][][SetID][][OK/NG][Data1][Data2][Data3] [Data4][Data5][Data6][Data7][x] Data1 Data2 00–64: The Backlight PWM value (0 to 100) 00–ff: The upper 1-byte of the value measured by the CA210. Data3 00–ff: The lower 1-byte of the value measured by the CA210. CA210 measurement: 0000 to ffff in hexadecimal and 0 to 65535 in decimal. Data4 00–ff: The upper 1-byte of the value measured by BLU 1 sensor. Data5 00–ff: The lower 1-byte of the value measured by BLU 1 sensor.
ENGLISH 96. Hybrid Mode (Command: s n, 96) Sets display’s transparency mode. Transmission [s][n][ ][Set ID][ ][9][6][ ][Data][Cr] Uses HDMI data to automatically set Picture Mode. Transmission [s][n][ ][Set ID][ ][9][9][ ][Data][Cr] Data Data 00 : Hybrid (effect: Off) 01 : Hybrid (effect: Full white) 02 : Semi-Transparent Acknowledgment [n][ ][Set ID][ ][OK/NG][9][6][Data][x] * This feature may not be supported for some models. 97.
