Owner's Manual A9 • Charge the battery fully before first use. • Read the Safety Instructions before using the product. • After reading this manual, keep it in an easily accessible location. A90**** MFL69883611 MFL69883611_en_180523.indd 1 www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
MFL69883611_en_180523.
Table of Contents Safety Instructions.............................................. 04 Product Overview................................................ 09 Installation............................................................ 10 Freestanding Installation............................................................ 10 Wall Installation.......................................................................... 11 Uninstalling the Station...............................................................
Safety Instructions Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on the appliance. Always read and follow all safety messages. Basic Safety Precautions After reading this manual, please keep it in an easily accessible location. This is the safety alert symbol. The symbol alerts you to potential hazards that can kill or injure you and others.
To reduce the risk of fire, explosion, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: Installation and Usage •• To avoid an electrical short or fire, do not install, charge or store the product where it may be exposed to water, rainfall or high humidity. Do not use the product in any outdoor location, workshop or garage environment. •• Install, charge or store the product in a wellventilated place.
Operation •• Read all instructions before using the appliance, and save these instructions. •• This appliance is designed for normal indoor domestic use only. It is not to be used for any non-residential, commercial, or industrial application. •• Do not tamper with controls. •• If the product has been submerged, contact an LG Electronics customer information center for instructions before resuming use. •• Push the power plug firmly into the wall outlet so that it is not loose.
•• This product is too heavy for use by children. •• Only qualified LG Electronics technicians or service personnel may disassemble, repair or modify the product. •• Do not insert metal objects into holes or gaps in the product or the charging station. •• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow. •• Do not expose the product or the battery to heat, heating devices, or direct sunlight.
CAUTION To reduce the risk of injury to persons, malfunction, or damage to the product or property when using the appliance, follow basic safety precautions, including the following: •• Do not subject the product to shocks or drop it. •• Secure the product in the charging station when not in use, to avoid it falling over. •• Do not use the product without the filter installed. •• Do not use the product to pick up oils or liquids.
Product Overview Freestanding Installation 4 Wall-Mounted Installation 1 9 1 9 6 6 1 2 3 2 2 5 8 4 8 3 7 Product body Extending wand Power Carpet Nozzle 4 5 6 3 Charging station Charging station stand Attachment storage 7 8 9 Charging station base Adapter Battery Included Accessories • Included accessories may vary based on model purchased.
Installation Freestanding Installation 1 Assemble the charging station stand by inserting the support pipe into the base. Slide the charging station onto the top of the support pipe. Take care to avoid pinch points. 4 Put the anchoring block on the back of the charging station and anchor the charging station with the screw. • Make sure to fully tighten the screw. Wall-anchoring block Stand setscrew Wall anchor 2 CAUTION • Avoid getting your fingers stuck in any gaps.
CAUTION • To avoid product damage or personal injury, take • • • • care not to drop the product parts while unpacking them. Do not use the double-sided tape on wallpaper. The weight of the charging station and the product could damage the paper. We recommend anchoring the station with the anchoring screw. If attaching to concrete or a wall stud, use the setscrew without a wall anchor. If attaching to drywall, drill a hole and insert the wall anchor first.
Operation Before Using • The dust bin lid must be in place before using Attaching the Wand and Accessories • 1 • • • • • • • • • • • • the product. Otherwise, the suction strength will deteriorate and cleaning will not be satisfactory. Support the bottom of the product when cleaning an elevated surface. Store the vacuum in the charging station or flat on the floor when not in use. Leaning the vacuum against a wall or chair can result in product damage or personal injury if the vacuum falls.
Charging the Battery 1 Put the product on the charging station. • The battery indicator has 3 bars to indicate the charge level. The bars will flash during charging. 2 Insert the battery into the auxiliary charging station. Auxiliary battery charge indicator 2 An auxiliary battery can be charged in the base of the charging station. • The auxiliary charge indicator will flash until the auxiliary battery is fully charged. CAUTION • Make sure to securely fit the unit on to the charging station.
Using the Nozzles • The nozzles included may vary by product. • The nozzle can be attached to the product body or extension pipe. Crevice Tool Use to remove dust from corners or narrow spaces. • Adjust the suction lower if the inlet gets stuck on Combination Tool CAUTION • Do not use the product for anything other than Use the tool in crevice mode to clean flat surfaces such as sofas or mattresses. the floor, carpet, or bedding or higher if you need more power. domestic household purposes.
Maintenance Emptying the Dust Bin 1 Remove the battery from the unit before cleaning the dustbin. 2 Hold the dust bin over a wastebasket or trash can. 3 Press the release button at the bottom front of the dust bin to open the bin and shake to empty it. • Be careful as dust/foreign matter may spill out when you open the dustbin. Release button 4 Insert the crevice tool into the large dust separator and turn it counterclockwise to remove it.
3 Clean the exhaust filter with a brush or running water. • To maintain cleaning performance, remove the dust from the exhaust filter at least once a month. • Allow the exhaust filter to dry out of direct sunlight in a well-ventilated place. Reinstalling the filter before it is completely dry may result in mildew or odor. WARNING • Never wash the product body or separator with water. Water may reach the motor and cause electric shock or fire.
Cleaning the Power Floor/Carpet Nozzle CAUTION • Keep fingers away from pinch points when removing and assembling the brush. Check the brush and roller heads before using and clean as needed. • Do not immerse the brush or head in water or rinse 1 Remove the nozzle from the product. Press the release button to remove the head from the wand or product body. • Do not pick up oils or liquids with the vacuum. Turn the head upside down and insert a flatblade screwdriver in the cover lock slot.
Before Calling for Service Save time and money by checking the following before calling for service. Symptom The vacuum does not operate. Cause Battery is dead. Vacuum is powered off. Dust bin is full. Suction is weak. Vacuum won't charge. Filter is clogged. • Plug the adapter firmly into the charging Power cord is unplugged. Motor is cooling. The filter is dirty. The pre-filter was installed while damp or wet. The exhaust filter was installed while damp or wet. The unit powers off too soon.
Product Specifications Item/Model A90**** Exterior dimensions 10.2 in. (W) x 10.6 in. (D) x 44.1 in. (H) 260 mm (W) x 270 mm (D) x 1120 mm (H) Weight 5.7 lb / 2.7 kg Power consumption: 400 W (Maximum power: 450 W)/250 W/ 80 W (Turbo/Power/Standard) Suction power 140 W1 Battery DC 25.55 V Battery run time2 (When fully charged, and without using the Nozzle3) Approx. 6 minutes in Turbo Approx. 9 minutes in Power Approx. 40 minutes in Standard Approx.
Warranty ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW. LG Electronics Inc.
CUSTOMER ASSISTANCE INFORMATION: To Prove Warranty Coverage To Obtain Nearest Authorized Service Center or Sales Dealer, or to Obtain Product, Customer, or Service Assistance Retain your Sales Receipt to prove date of purchase. A copy of your Sales Receipt must be submitted at the time warranty service is provided. Call 1-800-243-0000 (Phone answered 24 hours - 365 days a year) and choose the appropriate prompt from the menu; or visit our website at: http://us.lgservice.com.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more than $25,000 in damages, in which case the payment of these fees will be governed by the AAA Rules. Except as otherwise provided for herein, LG will pay all AAA filing, administration and arbitrator fees for any arbitration initiated in accordance with the AAA Rules and this arbitration provision.
MFL69883611_en_180523.
Made in Korea MFL69883611_en_180523.
