Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- INSTALLATION
- OPERATION
- SMART FUNCTIONS
- Using LG ThinQ Application
- LG ThinQ Application Features
- Before Using LG ThinQ Application
- Installing the LG ThinQ Application
- Connecting the Appliance to LG ThinQ
- Turning Wi-Fi On/Off on the Appliance
- Wireless LAN Module Specifications
- FCC Notice
- FCC RF Radiation Exposure Statement
- Supplier’s Declaration of Conformity
- Open Source Software Notice Information
- Smart Diagnosis™ Function
- Using LG ThinQ Application
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
31MAINTENANCE
ENGLISH
10 Turn the product body over, lift the
Kompressor lever h up, and clean the inside
of the working plate with the towel-wrapped
brush handle.
Cleaning the Filters
Clean the exhaust filter and the pre-filter when the
filter cleaning icon
K lights up.
• Clean the filters more frequently if the appliance
is used regularly or in areas with a lot of dust.
CAUTION
• Do not use the appliance without the exhaust
filter and pre-filter installed. Doing so could
result in product damage.
1 Remove the battery from the product body.
2 Rotate the exhaust filter a to the unlocked
position b to separate it from the product
body.
3 Lift out the pre-filter c from the product
body.
4 Use the combination tool d to clean any dust
off the motor.
• Do not wash the motor with water.
5 Clean filters by brushing the dust off and
wash them in running water at least once a
month.
• To avoid odor and the malfunction of the
motor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
6 Insert the dried pre-filter and rotate the
exhaust filter to the locked position e to
reassemble it on the product body.
Cleaning the Nozzle
Clean the nozzle and rotating brush regularly.