Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- INSTALLATION
- OPERATION
- SMART FUNCTIONS
- Using LG ThinQ Application
- LG ThinQ Application Features
- Before Using LG ThinQ Application
- Installing the LG ThinQ Application
- Connecting the Appliance to LG ThinQ
- Turning Wi-Fi On/Off on the Appliance
- Wireless LAN Module Specifications
- FCC Notice
- FCC RF Radiation Exposure Statement
- Supplier’s Declaration of Conformity
- Open Source Software Notice Information
- Smart Diagnosis™ Function
- Using LG ThinQ Application
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
33MAINTENANCE
ENGLISH
3 Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the brush and the
bottom of the nozzle.
4 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
• Remove foreign objects from the rollers of
the nozzle using tweezers.
• Do not rinse or submerge the rotating
brush or nozzle in water.
• Wrap the handle of the cleaning brush with
a wet towel or cloth and use it to clean the
rotating brush and nozzle.
5 Slide the brush back into the nozzle until it
clicks into place.
Cleaning the Dual Floor Max Nozzle
Clean the brush and roller heads before each use.
• If the brush contains foreign objects, the brush
may not spin or a noise may occur during
operation.
1 Press the nozzle release button a to remove
the nozzle from the extension pipe or product
body.
2 Turn the nozzle upside down. Press the
button on the nozzle and turn the cover lock
clockwise.
3 Pull the brush cover forward and pull the
main brush out.
4 With the left button of the sub-brush pressed,
pull the sub-brush out.
5 Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the main brush, sub-
brush and the bottom of the nozzle.