MFL69883624 RELEASING THIS DRAWING WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES. 이 도면은 LG전자의 자산으로 불법 유출시 관계법과 회사규정에 의해 처벌됨. WORK SEC. 24 재 적용모델 질 표지 : 아트지 150g 무광 Laminating 내지 : 모조지 80g OFFSET 인쇄 A9******** 인쇄방법 OFFSET 인쇄 인쇄도수 표지 내지 3도 PAGE REMARK 싱가폴향, A9 Plus 24, A5 2도 English << 주기 >> 210 1. 재질, 인쇄방법, 인쇄도수, 외곽치수등은 작업표에 준한다. 2. 인쇄내용, 문자크기 및 형상, 선의 굵기 등은 설계에서 제시된 도면에 준함. 3. 외곽치수는 절단후 치수임. 4. 양산전에 설계 한도를 득할 것. 5.
User's Manual A9 Make sure to read the "Safety Cautions" carefully before starting to use this product. Please keep this User's Manual within easy reach of the user. As the product is only intended for domestic use such as household cleaning, it must not be used for commercial, experimental or industrial purposes. Make sure to fully charge the product's battery before first use of the product after purchasing it. MFL69883624 www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved.
Table of Contents This User's Manual may contain images or contents that differ slightly to the purchased product. Safety PRECAUTIONS.............................................. 04 Package information........................................... 10 Installation............................................................ 11 Installing the floor standing charging station........................................................11 Installing the wall-mount station...............................................
Safety PRECAUTIONS The following cautions are intended to protect you from unexpected risk or property loss by ensuring safe and correct usage of the product. Cautions are categorized into 'Warning' and 'Caution', which mean: Pictograms are designed to draw attention to matters and uses that may pose a risk to the user. Make sure to carefully read any item marked with this symbol and comply with it to prevent any risk.
Installation and Usage Do not install, charge or store the product where it may be exposed to water, rainfall or severe moisture. Do not use the product in any outdoor location, workshop or garage environment. •• Such conditions will leave the product vulnerable to fire when charging the battery. •• Please install, charge or store the product in a well-ventilated place. Make sure to avoid places where there is a risk of leakage of flammable gas, industrial oil or metallic dust.
Power requirements This product should only be used with AC 220 V. Make sure to check the power specifications of the place where you intend to use the product. •• The wrong specifications will result in electric shock or damage the product in the event of a short-circuit. Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it. •• The power cord may get damaged and cause electric shock or injury.
Proper usage Make sure that no child is allowed to use the product. •• The product is too heavy for a child to handle properly. Make sure that no hand, foot, hair or clothes gets stuck in the rotating brush or wheel while using or cleaning the product. •• Failure to do so may damage the product or result in injury. No one other than a qualified technician/service engineer from LG Electronics may disassemble, repair or modify the product.
Do not expose the product, and the battery in particular, to heat, a heating device or direct sunlight. •• It may result in electric shock, explosion or fire. Do not keep the product or its battery inside a vehicle which is exposed to direct sunlight. •• It may cause fire or explosion. In the event that some kind of liquid leaks from the battery, make sure that it does not contact the skin or eyes. •• It may burn the skin or severely damage the eyes.
CAUTION Proper usage Do not apply impact to the product or drop it from a height. •• It may damage the product and/or result in injury. Make sure that the product does not fall. •• It may cause injury or damage the product. Make sure that the filter is installed in the product prior to each use. •• Failure to install a filter may result in product malfunction. Make sure to wipe up any liquid such as water or oil or pet excrement from the floor before using the product.
Package information Standing type Wall-mount type 4 1 9 1 9 6 6 1 2 3 2 2 5 8 4 8 3 7 3 Product body Extension pipe Power Drive Floor Nozzle 4 5 6 7 Charging station 8 Charging station pipe Combination tool and crevice tool 9 holder Charging station support Adaptor Battery Accessories • Parts and accessories may vary depending on the model that you have purchased.
Installation Installing the floor standing charging station (it can be Free Standing or Wall Mounted) 1 Put the anchoring block on the back of the charging station and anchor the charging station with the screw. • Make sure to fully tighten the screw. Wall anchoring block Put the bottom of the charging station onto the floor and assemble the pipe first, followed by the upper body mount.
CAUTION • Avoid dropping the product and parts when taking them out of the package. It may damage the product and/or cause personal injury. • Do not use double-sided tape to anchor the charging station on papered walls. Please use the provided screws as otherwise the wall paper will get torn by movement of the charging station during the docking of the unit. • We recommend anchoring the station with the anchoring screw. • Use the anchoring screws only when the wall is made of concrete or is solid enough.
How to Use Note about using the product Using the Product Points to be aware of when using the product 1 Assemble the body, extension pipe, inlet port, and battery in that order. • Make sure that the dustbin lid is on prior to using • • • • • • • • • • • the product. Otherwise, the suction strength will deteriorate and cleaning will not be satisfactory. Support the bottom of the product when cleaning an elevated surface.
Charging the Product 1 2 Insert the battery into the auxiliary charging station. Put the product on the charging station. • The battery indicator will start to flash and charging will proceed in 3 steps. Charging indicator of the auxiliary battery 2 The battery indicator starts to flash and charging will start. • All of the indicators will stay on when the battery is fully charged. CAUTION • Make sure to securely fit the unit on to the charging station.
Using the nozzles Crevice Tool • Please note that the following applies to the It is suitable for cleaning dust in a corner or a narrow space. corresponding models: • The nozzle can be attached to the product body or extension pipe. • Use a different mode if the inlet gets stuck on the floor, carpet or bed sheets or if you need a more powerful mode. CAUTION • Do not use the product for any purpose other than domestic household.
Maintenance Cleaning the the Dustbin 1 Remove the battery from the unit before cleaning the dustbin. 2 Please empty the dustbin next to a wastebasket or where dust and foreign objects can be emptied easily. 3 Press the dustbin button downward to open it. • Empty the bin. • Be careful as dust/foreign matter may spill out when you open the dustbin. 6 Remove the Cyclone and use the combination tool to clean out the dust inside the dustbin.
3 Clean the exhaust filter by brushing the dust off or by washing it in running water. • To maintain cleaning performance, remove the dust from the exhaust filter at least once a month. WARNING • Never wash the product's body with water as it may reach the motor and result in electric shock or fire. • Make sure that no foreign object reaches the motor as it will damage the product and may result in explosion or fire.
Cleaning the Power Drive Floor/ Carpet Nozzle • Avoid getting your finger stuck in any gaps when Please clean the floor and carpet nozzles as follows: • Do not wash the rotating brush and the nozzle with 1 2 • Do not use the rotating brush as a mop. • Do not use the nozzle to absorb any liquid. Remove the nozzle from the product. Turn the nozzle upside down and turn the rotating brush removal screw counterclockwise. • Use a flat head screwdriver to turn the screw. CAUTION reassembling. water.
Points to check before contacting customer service. Please check once again if one of the following symptoms is present while using the product. The product may not be malfunctioning. Symptom Cause The product does not operate. Is the battery fully discharged? Is the product powered off? Is the dustbin full of dust? Is the filter clogged? Suction is too weak. Is the inlet clogged? The unit does not appear to be charging. Hot air is expelled from the unit.
Disposal information Disposal of old products not related with the purchase of a new product You must contact your local city council or the related government authority before disposing of large appliances. Product specifications Item/Model A9**** Dimensions 260 mm(W) X 270 mm(L) X 1120 mm(H) Weight 2.7 kg Power consumption: 400 W (Maximum power: 450 W)/ 250 W/ 80 W (Turbo/Power/ Normal) Suction power 140 W 1) Battery DC 25.55 V Battery Approx.
Note
Note