OWNER'S Manual A9 Make sure to read the "Safety Cautions" carefully before starting to use this product. Please keep this Owner's Manual within easy reach of the user. As the product is only intended for domestic use such as household cleaning, it must not be used for commercial, experimental or industrial purposes. Make sure to fully charge the product's battery before first use of the product after purchasing it. MFL69883617 www.lg.com Copyright © 2018 - 2019 LG Electronics Inc. All Rights Reserved.
Table of Contents This User's Manual may contain images or contents that differ slightly to the purchased product. Safety Cautions..................................................... 04 Package information........................................... 12 Installation............................................................ 14 Installing the floor standing charging station........................................................14 Installing the wall-mount station...........................................
Safety CAUTIONS The following cautions are intended to protect you from unexpected risk or property loss by ensuring safe and correct usage of the product. Cautions are categorized into 'Warning' and 'Caution', which mean: Pictograms are designed to draw attention to matters and uses that may pose a risk to the user. Make sure to carefully read any item marked with this symbol and comply with it to prevent any risk.
Battery ••Never use the battery, adapter, and the charging station from other appliances with this appliance. Use only the battery and the charging station provided by LG Electronics. ••Never use the battery, adapter, and the charging station from this appliance with other appliances. ••Do not use the battery if it is leaking or has changed shape. If skin or eyes come into contact with battery fluid, thoroughly wash the affected area immediately with clean water and seek medical attention.
Installation and Usage Do not install, charge or store the product where it may be exposed to water, rainfall or severe moisture. Do not use the product in any outdoor location, workshop or garage environment. •• Such conditions will leave the product vulnerable to fire when charging the battery. •• Please install, charge or store the product in a well-ventilated place. Make sure to avoid places where there is a risk of leakage of flammable gas, industrial oil or metallic dust.
Stop using the product and contact the customer service department of LG Electronics if the power cord or power plug is damaged or the holes of the power outlet socket are loose. •• Failure to do so may result in electric shock or fire. Make sure to unplug the power cord when cleaning or maintaining the charging station. •• Failure to do so may result in injury or electric shock. Make sure to unplug the power cord when the product is not to be used for an extended period of time.
Do not let liquid stain the upper part of the mop nozzle. Do not clean a wet floor. •• It may damage the product or cause electric shock. Do not use or store a heating device or flammable substance(ether, benzene, alcohol, chemicals, combustible spray, insecticide, air freshener or cosmetics) in close proximity to the product. •• It may result in product malfunction or fire. Do not attempt to clean up a liquid substance (water, beverage), odorous substances (candy, chocolate, pet excrement, etc.
•• If a child places the product or battery into its mouth, it will cause electric shock or injury, or damage the product or battery. When using the product, remove any wire or string from the bottom of the Charging Station. •• Straps or wires may wrap around the product and cause a product malfunction or a broken cord. Do not insert your finger into the moving rotor. •• It may cause an injury or product damage. Take caution not to get fingers caught in the flexible part of the nozzle.
CAUTION Proper usage Do not apply impact to the product or drop it from a height. •• It may damage the product and/or result in injury. Make sure that the product does not fall. •• It may cause injury or damage the product. Make sure that the filter is installed in the product prior to each use. Do not install wet or damp filters. They must be dry before fitting them. •• Failure to install a filter may result in product malfunction.
Do not leave the product standing on the charging station while the mop nozzle (and its water tank) attached to the main body. •• The water may leak and damage the floor. Do not store the water tank where the temperature is 0 ºC or lower. •• It may result in product damage. Do not clean the same spot repeatedly for an extended period of time. •• The water injection at the mop nozzle may cause the water get into the dust inlet and damage the main body. Do not use the mop nozzle for any purpose (e.g.
Package information Standing type 4 1 10 6 7 2 5 9 3 8 Wall-mount type 1 10 4 6 2 9 3 1 Product body 5 Charging station pipe 9 2 Extension pipe 6 10 Battery 3 Multi-surface Power Drive Nozzle® Combination tool and crevice tool holder 7 4 Charging station Detachable stand for nozzle and mop pads 8 Charging station support 12 Adaptor
Accessories • Parts and accessories may vary depending on the model that you have purchased. Product body Extension pipe Multi-surface Power Drive Nozzle® Charging station Adaptor Crevice Tool Combination Tool Wall Anchoring Block Double-sided tape (2) 1) Battery 1) Screw Anchor (2) Anchoring screw for wall-mount type (Φ 3.5 mm, length 50 mm)(2) Anchoring screw for standing type (Φ 3.
Installation Installing the floor standing charging station 1 4 Place the charging station support on the floor and assemble the charging station pipe, the Detachable stand for nozzle and mop pads and the charging station in this order. Put the anchoring block on the back of the charging station and anchor the charging station with the screw. • Make sure to fully tighten the screw.
CAUTION Installing the wall-mount station • Avoid dropping the product and parts when taking them 1 • 2 • • • • out of the package. It may damage the product and/or cause personal injury. Do not use double-sided tape to anchor the charging station on papered walls. Please use the provided screws as otherwise the wall paper will get torn by movement of the charging station during the docking of the unit. We recommend anchoring the station with the anchoring screw.
Storage of the combination tool and crevice tool Keep the combination tool and crevice tool on the charging station for easy access. 1 2 Attach the combination tool and crevice tool to the dedicated holders. Storage of the Mop Nozzle Storing mop nozzles on the Detachable stand for nozzle and mop pads helps in finding and using the mop nozzle. 1 Mount the mop nozzle to the nozzle cradle. 2 Lift the nozzle to separate the mop nozzle.
How to Use Note about using the product Using the Product Points to be aware of when using the product 1 Assemble the body, extension pipe, inlet port, and battery in that order. • Make sure that the dustbin lid is on prior to using • • • • • • • • • • • the product. Otherwise, the suction strength will deteriorate and cleaning will not be satisfactory. Support the bottom of the product when cleaning an elevated surface.
Charging the Product 1 Put the product on the charging station. • The battery indicator will start to flash and charging will proceed in 3 steps. 2 Insert the battery into the auxiliary charging station. Charging indicator of the auxiliary battery 2 The battery indicator starts to flash and charging will start. • All of the indicators will stay on when the battery is fully charged. CAUTION • Make sure to securely fit the unit on to the charging station.
Using the nozzles • Please note that the following applies to the corresponding models: • The nozzle can be attached to the product body or extension pipe. • Use a different mode if the inlet gets stuck on the floor, carpet or bed sheets or if you need a more powerful mode. CAUTION • Do not use the product for any purpose other than domestic household. Crevice Tool It is suitable for cleaning dust in a corner or a narrow space.
Hard Dirt Tool Multi Angle Tool It is firm bristles for removing dirt from hard surfaces. Since it can be adjusted to various angles and the brush is soft, it is used to clean the console in the vehicle or on top of furniture. Mattress Tool Flexible Hose Extension It is for mattresses and soft furnishing. Flexible Crevice Tool Since its length can be adjusted and it can be bent, it is used for cleaning dust inside the vehicle or narrow spaces in furniture where bending is necessary.
Mop Nozzle How to install the mop It is suitable for cleaning dust and mop cleaning at the same time. 1 Wet the mop pad with water before use. Please note The mop pads will only rotate at one speed regardless of what power setting the Vacuum is set to. For mop cleaning How to fill the water 1 Press the PUSH button to separate the mop nozzle and the water tank. 2 Squeeze the mop pad sufficiently to remove liquid. 2 Open the cap on the side of the water tank. • Open one cap only.
For dry mop cleaning 1 2 3 Empty the water in the water tank. Please note • When using a mop, clean using straight lines and diagonal lines. Attach the dry mop pad to the mop attachment plate at the bottom of the mop nozzle. Set the Water Adjustment button to STOP. • Wet the mop and squeeze it sufficiently to remove 4 Turn on the power and begin mopping • WARNING • Do not insert your hand into the moving rotor. It may result in injury. • Do not attach the mop pad while the mop nozzle is operating.
Maintenance Cleaning the the Dustbin 1 Remove the battery from the unit before cleaning the dustbin. 2 Please empty the dustbin next to a wastebasket or where dust and foreign objects can be emptied easily. 3 Press the dustbin button downward to open it. • Empty the bin. • Be careful as dust/foreign matter may spill out when you open the dustbin. 6 Remove the Cyclone and use the combination tool to clean out the dust inside the dustbin.
3 Clean the exhaust filter by brushing the dust off it regularly and wash it at least once a month. WARNING • Never wash the product's body with water as it may reach the motor and result in electric shock or fire. • Make sure that no foreign object reaches the motor as • Wash the exhaust filter in running water if it emits an odor. • The exhaust filter may emit an odor if it is not dried completely after it has been cleaned in water.
Cleaning the Hard Floor Power Drive Nozzle®/Multi-surface Power Drive Nozzle® Please clean the Hard Floor Power Drive Nozzle® and Multi-surface Power Drive Nozzle® as follows: 1 2 Remove the nozzle from the product. Turn the nozzle upside down and turn the rotating brush removal screw counterclockwise. • Use a flat head screwdriver to turn the screw. Rotating the brush removal screw 3 CAUTION • Avoid getting your finger stuck in any gaps when reassembling.
Cleaning of the Mop Nozzle Drying the water tank Clean the mop nozzle as below. Open the 2 caps on the side of the water tank and shake the water tank to remove the remaining water. Drying thoroughly for over 24 hours in a well-ventilated location with no direct sunlight is effective to remove moisture from the water tank. 1 Separate the nozzle from the product and turn the nozzle over. 2 Attach the crevice tool to the main body of the vacuum to remove any foreign objects from its base.
Points to check before contacting customer service. Please check once again if one of the following symptoms is present while using the product. The product may not be malfunctioning. Symptom The product does not operate. Suction is too weak. The unit does not appear to be charging. Hot air is expelled from the unit. Cause Is the battery fully discharged? Is the product powered off? • Charge the battery. • Press the power button to power on the product.
Symptom The cleaner makes too much noise. Cause Is it operating properly? Solution • Different levels of noise is normal during operation due to three power settings. It is not a sign of malfunction. • The battery must be fully charged before Is the battery fully charged? The unit powers off too soon or by itself after the motor speed fluctuates repeatedly.
Disposal information Disposal of old products not related with the purchase of a new product You must contact your local city council or the related government authority before disposing of large appliances. Product specifications Item/Model A9********** Dimensions 260 mm(W) X 270 mm(L) X 1120 mm(H) Weight 2.7 kg Power consumption: 400 W (Maximum power: 450 W)/ 250 W/ 80 W (Turbo/Power/ Normal) Battery DC 25.
Note