Hi-Fi STEREO Video Cassette Recorder with ShowView OWNER'S MANUAL MODEL: BD954P R PAL Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely.
Position your VCR so that no sunlight falls directly onto it. Precaution&fs Informatin bright light Just to or name a extraordinary few examples of the features: Care should be taken not to expose your VCR to any unnecessary vibration, moisture, dust or heat. electrical storms it is advisable to During the aerial cable and mains damage plug unplug both ? prevent accidental to to your VCR and TV. operate your VCR if it is damaged.
Welcome to LG Thank you for buying this LG video cassette recorder Model BD954P.
Your video recorder (VCR) is designed so that almost all of its features can be controlled from the REMOTE CONTROL HANDSET. Some features can also be controlled from the FRONT PANEL of the video recorder. The maximum operating distance that you may control your video recorder is about 7.5 metres (25 feet). It must also be within an angle of 30 degrees either side of the REMOTE SENSOR on the front of your video recorder.
Each button on your VCR has the same function as its corresponding button on the remote control handset. Power Stop & Tape (ON/OFF) Eject REC/ITR Compartment (Instant Record) REC/ITR PROG. AV3 VIDEO IN Cassette POWER CST.
The on the next two pages is the most common forms of connection. However your manufacturers instruction books for specific information. Make sure all connections are made with both your VCR and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting a VCR using a SCART lead is one of the best ways to achieve optimum sound and picture quality from video-tape playback. guidance given please check with Conectis ToaV&Decdr (orSateli) Aerial The Decoder aerial.
Make sure all connections are made with both your VCR and camcorder unplugged from the mains to avoid damaging your equipment. To make connecting your camcorder easier we have designed the Audio IN (Left and Right) and Video IN sockets on the front panel of your VCR. ToaCmcrde Conectis Front view of your VCR AV3 VIDEO IN REC/ITR PROG. POWER CST.
Your TV receives signals from the video recorder (VCR) like another TV station. You have to select a channel number on your TV and tune it in so that you may watch video tapes. If you have used a SCART or AUDIO and VIDEO cables then your TV should already have a dedicated video channel built into it, usually called AV. Tunig a Videochanl OnyourTV The Make VCR as in this book.
Only carry out stages 5~8ifyoucannot obtain clear video playback as stages 1 Press PROG. a 4. ~ Select TV channel a Tune this channel 22 and 68. appears. channel. number Make which you wish to watch video's. in display. TV channel sure bright blue that dedicated on your TV. If you do not tune in a dedicated video channel on your TV you will be unable to view on your TV.
This VCR The How to Usingthemau LANGUAGE SELECTION You can select the language English, Deutsch, Francais, Italiano, Espanol and among can Switch on your TV set and video recorder by the POWER pressing easily menus are button. be programmed by using the displayed menus on screen. controlled from the REMOTE CONTROL HANDSET. Press i button. The main appear menu on Press F and G to select Press i to the desired menus menu. will the TV remove the from the TV screen. screen.
Press POWER to turn on Press i. Press F your VCR. The main menu the TV on appear Press F will or screen. G to select or G to select appear when (A: Austria, B: Belgium, CH: Switzerland, D: Germany, DK: Denmark, E: Spain, F: France, I: complete. the ACMS. Italy, Press OK. Netherlands, P: Portugal, S: Sweden, SF: Finland, N: Norway, NL: Automaicly TVstaion Tunig n The TV station table will COUNTRY. Press i to is tuning save your settings.
In certain areas of the country broadcast signals may be too weak for your VCR's automatic process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually in order for your VCR to store them. tuning M a n u l y Tunig n TVstaion Press i. Press AV to select C The main (Standard stations) (Cable stations): menu the TV on appear will screen. C02 - C71, S01 SHOWVIEW Press F or G to select the PR SET.
PressDorEtoselecta You station station name from the rather list. change a TV manually than using the can name "standard" Press OK to select it. names. press OK, but go to Press i again. placement. Your If you wish to manually tune other stations Press G. If your station name isn't on the list do not Press i, confirm the station repeat stages 1 - new TV station has been tuned into your VCR. now 7. Press D or E to select letters and numbers for the new station name. 6.
After TV stations into your VCR you may wish to change the order in which they having to retune them against! The instructions given on this page will tuning are stored without show you how you Changi theord f TVstaion Press i. simply can move them into your desired order. Press i. Press D or E to select the programme number The main menu appear Press F will the TV on or Press D screen. G to select or E to select the programme number you want to move example, PR 03).
After TV stations into your VCR you may wish to delete a station. given on this page will show you how easily delete any unwanted TV stations. tuning The instructions Press i. Press i. Press i to Press F. menus The main menu appear Press F will the TV on or Press D screen. or E to select the programme number you want to delete. After short while, the a screen. How to selecting Stored TV stations: If you wish to delete other TV stations repeat deleted.
You will Playbck be able to load and only Your VCR may also playback a better a tape Getting When eject video cassettes when your VCR is plugged recordings from NTSC tapes (on PAL TV). into the mains. picture playback started, the automatic tracking function works to get possible picture automatically.
Picture search will only continue for about 3 minutes, after which your VCR will return to playback. During picture search, logic search, and CM Skip the sound is muted there will be some noise streaks on the picture. normal and Slow motion playback, Shuttle: Press STOP to end playback. During playing back or picture press F or still G.
Your VCR allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR) start recording immediately for a set period of time video cassette Recording TVprogames Make VCR that you have connected your described earlier sure correctly as a video cassette protection tab into your VCR. Press to select or the programme number you wish to record. Press POWER to turn your VCR.
Your VCR incorporates Long Play (LP) which enables you to record up to twice the amount of video cassette. For example an E-180 will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a slight loss in picture and sound quality when using LP. time on a Press LP if you wish to Press REC/ITR to start Press P/STILL to avoid record in recording. recording Standard Long Play Play.
Your VCR is equipped with triple colour can play back a tape in We have standard, you connect PAL and MESECAM. CANAL+ During playback your VCR detects the system automatically. It there are colour problem please select the colour system manually. TTosethclurym osethdcr Press D The main will menu the TV on appear or E to select according to the COLOUR system used. screen. or Press i. Press D The main on appear menu will the TV ON: screen.
The clock in your VCR controls time and date settings for your VCR. For ShowView to work correctly the current time and date must be set. Press i. Press F or Use the numbered buttons on the remote control to alter the G to select TIME DATE. If you make a mistake press F or G and enter the correct details. HOURS, MINUTES, DAY, MONTH and Press OK. OK Please note your VCR uses a 24 hour clock.
ShowView greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering a ShowView Code. ShowView Codes are published in most TV guide magazines; they can vary one to nine numbers in length. ShowVie Progaming Timer Recording you may record recordings may be these automatic Make sure that TV at a later time Press SHOWVIEW. Press D channels have been the tuned and stored in correct SHOWVIEW order.
SHOWVIEW is a registered The SHOWVIEW Press OK. trademark of Gemstar Press F or G to select Press G and press D the If PLEASE CHECK is displayed it means that you have entered the wrong ShowView settings that you wish to revise. (PR, DATE, TIME and SP). Press D or E to enter the correct information. number, entered the ShowView number "- -" is displayed, Long Play.
If you choose not to use ShowView, you can set timed recordings manually. You may set up to seven timer record events within one month of the current date PLEASE NOTE! before setting the timer make sure that you have set the VCR clock correctly and you know which stations you have tuned TV stations Timercodng UsingOScreDplay Insert with a video cassette protection Press i. Press OK to start tab into your VCR. setting G to select or facing up and facing away arrow OK CLK/CNT the or .
If at If Timer record later date you wish to delete or change any of the settings in timer event memory you may without having to enter all the timer event information again. Simply display the timer event screen. Press D or E to select the event that you wish to delete or change. a do events so Make Press F to delete the event...or Press OK to change; then press F or G to select; Station, Date, Start and End times and LP. Press D or E to enter the correct information. Overlap...
Your VCR has an which if set will Energy Save feature place your VCR into an You may economic power save where the clock display will disappear. If you have programmed a recording, this feature EnergySavin OnScreDisplay on the VCR. Press on the VCR and your VCR will go into Energy Save. again POWER and VCR indicators will light in the display. video recorder's the current time Press OK/CLK/CNT to Press OK/CLK/CNT display. repeatedly to display TAPE COUNTER.
The Digital Tape Counter can be displayed on your VCR's display instead of the time by pressing OK/CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape. Press OK/CLK/CNT. Press STOP when Press CLEAR to set the playback complete. counter to 0:00:00. Press PLAY or start is tape display counter will the actual play time in hours, minutes and seconds. can only be automatically stop when the counter returns to 0:00:00.
Your VCR WideScrn Compatibly 16:9 Switch wide can record and play back wide format programme be broadcast by the TV station. a screen your VCR. on Press D E repeatedly AUTO, 4:3 or or to select: Press i. screen successfully 16:9. aspect ratio programmes (16:9). To record type of wide screen signal must the correct Press i to remove the from the TV To screen. connect your VCR to the menus enjoy Wide-Screen playback you must TV Press F G to select or CLEAR 16:9/4:3.
Automatic Memory Shut-Off This feature of your VCR enables you to switch off your VCR automatically after Self-Diagnosis (VIDEO DOCTOR) This feature informs you that there is problem with your VCR. These error tape rewind has been completed. Press POWER during tape rewind. The tape will rewind messages will appear on the TV screen and in your video recorder's display. to beginning and your VCR will automatically Switch your VCR.
Your VCR will record and playback Hi-Fi stereo sound. This allows you to record and playback the sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio Hi-FStero Soundystem Your VCR's allows you to enjoy broadcasts with sound. The particular type received will be on or or Press i. Press for recorded STEREO, (left channel), RIGHT (right channel) Press OK.
(easy) repeat By pressing & holding ez REPEAT during playing back, the holding section is replayed twice automatically. (easy) power off Rewind Sequence of "Stop Power Off is operated Eject automatically by pressing ez POWER ez ez " eoperations z(easy) OFF. During playing press ez back POWER OFF. Your VCR will be ed as the operat- following ; During playing back, press & hold ez REPEAT at the point where repeat play CM SKIP 0 LP SHOWVIEW STOP is to be concluded.
A second VCR (for tape copying) should be connected to the AV sockets on the front of your VCR or one of the SCART sockets on the back of your VCR. Remember to select the appropriate audio/video mode by pressing the AV button on the remote control. TapeCoying Specifatons General Power Power 200-240V~,50Hz.
Video Head Whenever Cleaning a cleaned.
P/N:3834RP0052E