Owner's Manual

PLAYBACK BASICS
-17-
Searching
for a
Particular Point
in a Track
You
may quickly
scan
through
the contents
of a disc while
listening
to the
playback
at
high speed
in
forward or reverse.
To move forward
through
a
disc,
press
the
SEARCH[ ]
button on the remote or
press
and hold the
NEXT[ ]
button on the front
panel
that is
appropriate
for the deck
in
use.
To move backwards
through
a
disc,
press
the
SEARCH[ ]
button on the
remote,
or
press
and hold the
PREV.[ ]
button on the front
panel
that is
appropriate
for the deck
in
use. When
using
the
remote,
always
remember to make certain that
you
have selected the deck
you
wish to control
by pressing
the
appropriate
selector CDP or
CDR]
button before
entering
the desired
remote command.
Skipping
to the
Beginning
of a Track
To move from one
track
on a disc
directly
to
another,
enter the number for the desired track
with
the Numeric
Keys.
The disc
will
pause
briefly
to locate the
track,
and then
immediately play
it.
When
entering
a two
digit
track
number,
the second
digit
must be
entered
within
two seconds of the first
digit.
To move
to the next track
on a disc
by
cycling through
the
individual
tracks,
press
the
NEXT[ ]
button on the
remote,
or the
appropriate front-panel
NEXT[ ]
button for the deck
in
use. Additional
presses
of the button
will
move forward
through
the tracks on the disc.
When a disc is
playing,
press
the
PREV.[ ]
button to return to the
beginning
of the track
being played.
Additional
presses
of the
PREV.[ ]
button
will
move backwards
through
the
tracks on the disc.
When a disc is
stopped,
you may press
the
NEXT[ ]
or
PREV.[ ]
button to locate a
specific
track
that
you
wish to
play.
When the desired
track number
appears
at the left side of the
appropriate
Information
Display, press
the
PLAY[ ]
button to hear that track.
Dual-play
Mode
Since the unit has more than one CD
deck,
you may play
a disc
in
either drawer. When
only
one deck is
playing,
the unit is
in
the
Single
mode.
In
the
Single
mode,
the audio
output
will
be
fed to all
digital
and
analog jacks
for both
decks. This means
you may
select the
input
on
your
receiver,
preamp
or
processor
for
either deck. For
example,
if
you
have the
Play
Deck conncted to "CD" and the Record
Deck connected to
"TAPE",
when
only
one
deck is
playing,
either
input may
be
selected.
It
is also
possible
to
play
two discs at
once,
using
the Dual mode. To initiate dual-mode
playback, press
the
DUAL
button on the
front
panel
or remote. When the
DUAL-Play
Indicator is
lit,
you may play
a different disc
in
both decks at the same time. The
output
of each deck
will
be sent to the its
appropriate output jacks,
and
you
will
need
to select the deck
you
wish to listen to
using
the
input
selectors on
your
receiver,
preamp
or
processor.
You
may
also use the
output
of one deck to feed
your
main-room
system,
while the second deck is used to feed a
remote room.
As
long
as the
DUAL-Play
Indicator is
lit,
each deck functions as a
separate
CD
player,
and
will
respond
to its own set of
controls on the front
panel
for either the
Play
Deck or Record Deck.
To control the
transports using
the
remote,
remember to first
press
the Selector button
for either the
Play/CDP
Deck
or the
Record/CDR
Deck,
and then
press
the
desired command function.
NOTE :
When
in
the Dual
mode,
you may
return to
Single play
mode
by pressing
the
DUAL
button on the remote or the
DUAL
button on the front
panel.
However,
pressing
the
DUAL
button while both decks are
playing,
will
automatically stop playback
of
the disc
in
the
Record Deck
while the disc
in
the
Play
Deck
continues to
play.
The
output
of the
play
deck
will
be sent to both
sets of
output jacks.
Dual-Deck
Operation
Since the unit has two
separate
CD
decks,
it
may
be used to function as two-disc
changer,
so that
you
can
continually play
two discs.
When the unit is
in
the
Single-Play
mode,
as
shown
by
the
DUAL-Play
Indicator NOT
being
lit,
when the disc
in
one deck has
played through
to the
end,
the disc
in
the
other deck
will
automatically begin
to
play.
Each disc
will
play through,
and when one
deck is finished the other
will
start. To
stop
playback, press
the
STOP[ ]
button for the
deck that is
currently playing.
To have the unit function as a standard CD
player,
where the deck
in
use
stops
at the
end of a
disc,
press
the
DUAL
button until
the
DUAL-Play
Indicator
lights.
In
the Dual
mode,
each deck acts
independently
of the
other and when the disc
in
one deck
finishes,
it
stops
unless one of the
Repeat
functions has been activated.
PLAY STOP
INPUT DISPLAY NEX
REC/PLAY
DIGITAL RECORDING SYSTEM
PREV.
REC
PAUSE PLAY
PHONES PHONES LEVEL DIGITAL IN
STOP OPEN/CLOSE
DUAL DISPLAY NEX REV.
PAUSE OPEN/CLOSE
ADR-620
POWER
PLAYBACK
SPEED
CD SYNC
ERASE
DUBBING
FINALIZE
REC LEVEL
11 0
4
5 6
7
3
2
8
9
DUAL
NEXT( )
PREV.( )
STOP( )
PLAY( ) PLAY( )
STOP( )
PREV.( )
NEXT( )
PLAY( )
NEXT( )
CDR
CDP
DUAL
SEARCH( )
backward
SEARCH( )
forward
PREV.( )