CD RECORDER / PLAYER OWNER'S MANUAL MODEL : ADR-620 Please read this manual carefully before operating your set. Retain it for future reference. Designs and specifications are subject to change without notice for improvement.
IMPORTANT SAFETY INSTRUCTIONS CAUTION (FOR RISK OF ELECTRIC SHOCK DO NOT OPEN CUSTOMERS IN : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation Graphical Symbols : Lightning flash with symbol, within an equilateral triangle is intended to arrowhead user AN EXTENSION CORD, RECEPTACLE, OR to the presence of uninsulated Consult the dealer experienced help.
IMPORTANT SAFETY INSTRUCTIONS FOR CUSTOMERS IN THE UNITED Accessories STATES an table. The CAUTION : Read all of these instructions. Save these instructions for later Follow all marked on the audio Read Instructions use. and instructions warnings equipment. All the - safety and operating instructions should product is operated. be read before the Retain instructions operating The - safety and Warnings All warnings product and in the operating.
IMPORTANT SAFETY INSTRUCTIONS ANTENNA LEAD IN WIRE GROUND ANTENNA CLAMP DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) ELECTRIC SERVICE EQUIPMENT GROUNDING CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC-NATIONAL ELECTRICAL CODE Do not overload wall outlets, extension cords, or integral convenience Overloading receptacles, or - as this can result in a risk of fire electric shock.
TABLE OF CONTENTS 2 Instructions Important Safety Table of Contents 5 Introduction 6 Front-Panel Controls 8 Front-Panel Information 4X Dub Display 13 Installation and Connections 15 CD 16 Playback Normal 17 Search 17 Track 17 Dual-Play 17 Dual-Deck Recorders. plays all standard CD audio discs recording, the unit uses special CD-R and CD-RW discs designed only for audio use. CD-R discs designed for computer use The unit but for will not work in the unit.
FRONT-PANEL CONTROLS 31 30 2928 27 26 25 PREV. NEXT 24 23 22 21 20 19 18 17 16 15 14 REC LEVEL DUAL DISPLAY P INPUT NEXT EV.
FRONT-PANEL CONTROLS 10 Dubbing Press this button to : begin the process of marking a complete copy of the disc in the Play Deck to a CD-R or CD-RW Finalize recording is : complete to process. The Record Deck locate a initiate the finalization Button Play/Select on the finalization.
FRONT-PANEL INFORMATION DISPLAY O QS Y M K N C A X L GI F Random Indicators J Dual-Play B Program Indicators K Information C Level Indicators L Time Indicators D Repeat M Remaining-Time Indicators Repeat-Status F Speed G Copy-Prohibit H Dubbing I Sync Indicators Indicators Indicator Indicator Indicator N L CEK A BD HJ A E M VTRP E BD O USQ W Indicator Displays Indicators S CD Indicators T Record Indicator U Finalize Indicator V Erase Indicat
FRONT-PANEL INFORMATION DISPLAY L Time Indicator conjunction with This indicator : one lights in of the time indicators to show which of the time status modes is active. M Remaining-Time Indicator : This lights when the Information Display shows the time remaining on a disc. indicator R Sample-Rate Converter : This indicator lights when the Sample-Rate Converter is in use to change the digital sample rate when the incoming signal is not the standard 44.1kHz used by standard CDs.
REAR-PANEL CONNECTIONS R L CDP OUT OUT OUT OUT IN IN CDR CDR IN 1 3 5 OUT 78 9 246 1 Play (CDP)-Deck Analog Output 4 2 Record (CDR)-Deck Analog Output 5 Record 3 Record (CDR)-Deck Analog Input 6 Record 1 Play (CDP)-Deck Analog Output jacks the carry the Play jacks on 2 analog audio output : signal Deck. Connect them to the CD a receiver, preamp or These from input processor. Record (CDR)-Deck Analog Output : carry the output signal from the Record Deck.
REMOTE CONTROL FUNCTIONS 1 Display Control 2 Numeric 3 Reverse Search 4 Dual 5 Play / Select 6 Previous-Track Keys 1 Playback DISPLAY 123 Skip 2 7 Pause 8 Program 9 Play (CDP)-Deck Select 456 78 9 SERCH 10 Program Check 11 Repeat 12 Clear 13 Record Button 14 Dubbing 15 Input Select 16 Play (CDP)-Deck Open / Close 17 Record 18 Automatic / Manual Track Increment Selector 19 Track Increment 20 CD 21 Speed Select 22 Erase Button 23 Finalize 24 Repeat A-B
REMOTE CONTROL FUNCTIONS 1 Control Display Press this button to : the various time cycle through 11 Repeat Press this button : once to repeat display the current track. To repeat Deck and press the button twice, and then press options for the disc in the Play Record Deck. the Play / Select an 22 entire disc, Erase Button initiate the Press this button to : erasure entire CD-RW disc button. Note that erasure of or is a track or of an to Unfinalize a disc.
INSTALLATION AND CONNECTIONS To Install batteries : Your REMOTE CONTROL HANDSET is NOTE powered by two AAA type good 1. To insert off the batteries. extended of the handset. remove 2. Put the two batteries into the making sure the positioned. 3. Replace the + and - are replacing batteries, it always a replace both at the same time.
INSTALLATION AND CONNECTIONS Locating the unit To It is recommended that the unit not be placed a location that is subject to direct sunlight or extreme heat or cold, as in these conditions may input jacks on your receiver or processor. Note that you may have to change a setting on the receiver or processor to link the digital input to the "Tape" button or the specific input selector associated with the digital inputs.
CD RECORDING BASICS CD Recorders (CDRs) are similar to standard CD players, with the addition of the features and controls needed for Note that the unit is recording and specifically designed for the playback of consumer audio discs, DISC FULL : when there is not This message will appear room left on an unfi- enough recording. Functions such as programming for playback will be familiar, but the recorder will function slightly differently than what you may be used to for magnetic tape recorders.
PLAYBACK BASICS DISPLAY Numeric Keys OPEN/CLOSE PLAY STOP DUAL PAUSE SERCH SEARCH DUAL RANDOM PLAY PAUSESTOPOPEN/CLOSE DUAL RANDOM PLAY PLAY/ SELECT REC LEVEL DUAL DI PLAY REV. NEXT PREV. INPUT NEXT PREV. DISPLAY 5 OPEN/CLOSE PLAY PAUSE STOP PLAY PAUSE STOP NEXT 6 4 7 OPEN/CLOSE 3 8 2 PAUSE 9 PAUSE STOP STOP 11 0 REC POWER SPEED PLAYBACK PHONES PHONE LEVEL CD SYNC DUBBING ERASE FINALIZE PROG. CDP REC/PLAY AD DIGITAL IN 620 AUDIO CD CDP PROG.
PLAYBACK BASICS DISPLAY PREV.( DUAL ) NEXT( ) PREV.( NEXT( ) ) SEARCH( ) SERCH SEARCH DUAL RANDOM SEARCH( backward ) forward DUAL PLAY( NEXT( PLAY/ REC LEVEL DUAL DISPLAY REV. NEX REV. INPUT NEXT 5 PLAY PAUSE STOP PLAY PAUSE SELECT DISPLAY 6 4 OPEN/CLOSE STOP PREV.( 7 OPEN/CLOSE 3 8 2 ) PREV. REC CD SYNC DUBBING ERASE FINALIZE ) ) 9 PAUSE 11 0 POWER NEXT STOP PROG.
PLAYBACK BASICS DISPLAY DISPLAY DISPLAY DISPLAY SERCH SEARCH DUAL RANDOM REC LEVEL DUAL DISPLAY PREV. NEXT PREV. INPUT NEXT DISPLAY 5 PLAY PAUSE STOP PLAY PAUSE STOP PLAY/ 6 4 OPEN/CLOSE SELECT 7 OPEN/CLOSE 3 8 PREV. 2 NEXT 9 11 0 REC POWER SPEED PLAYBACK PHONES PHONE LEVEL CD SYNC DUBBING ERASE FINALIZE PAUSE STOP REC/PLAY ADR 620 DIGITAL IN AUDIO CD PROG. RECORDER CDP CDR PROG.
PROGRAM PLAY enter that track to the programmed sequence. DISPLAY When the complete list of tracks has entered, press the PLAY[ ] button. The tracks will then play in the order they been Numeric keys SERCH SEARCH DUAL RANDOM PLAY( NEXT( PLAY/ ) PREV. NEXT PAUSE CDR PROG. CHECK REPEAT ) PROG. CDR PROG. CDP PROG. CHECK ) STOP CDP CLEAR REPEAT A-B FINALIZE ERASE SPEED CD SYNC.
PROGRAM PLAY DISPLAY SERCH SEARCH DUAL RANDOM PLAY/ SELECT PREV. NEXT PAUSE STOP PROG. CDP CDR PROG. CHECK CLEAR REPEAT A-B FINALIZE ERASE SPEED CD SYNC. REPEAT REPEAT A-B REPEAT REC DUBBING INPUT CDP Repeat Programmed Play The unit's programming system enables you to repeat either a single track on a disc, the entire disc, or a specially programmed passage that you select.
CD RECORDING DISPLAY OPEN/CLOSE STOP( SELECT ) PAUSE OPEN/CLOSE SERCH SEARCH DUAL RANDOM PAUSE DISPLAY REV. NEXT REV. NEXT INPUT DISPLAY 5 PAUSE STOP PLAY PAUSE STOP SELECT 6 4 PLAY SELECT PLAY/ REC LEVEL DUAL OPEN/CLOSE 7 OPEN/CLOSE 3 PREV. 8 2 NEXT 9 11 0 REC POWER PLAYBACK PHONES PHONE LEVEL CD SYNC SPEED ERASE PAUSE DUBBING F NALIZE STOP( STOP ) PROG. ADR 620 DIGITAL IN PAUSE REC/PLAY AUDIO CD RECORDER CDP CDR PROG.
CD RECORDING DISPLAY CD SYNC. PLAY/SELECT REC NEXT( ) SERCH SEARCH DUAL RANDOM DISPLAY PREV. NEXT PREV. NEXT INPUT SELECT DISPLAY 5 6 4 PLAY PAUS E STOP PLAY PAUSE STOP PREV. PLAYBACK PHONES PHONE LEVEL SPEED DUBBING ERASE FINALIZE ) 9 PAUSE 11 0 CD SYNC NEXT 8 2 REC NEXT( 7 OPEN/CLOSE 3 POWER PLAY/SELECT PLAY/ REC LEVEL DUAL OPEN/CLOSE PAUSE STOP( STOP ) PROG. REC/PLAY ADR 620 DIGITAL IN AUDIO CD CDP RECORDER CDR PROG.
CD RECORDING 4. Press the AUTO/MANUAL button to select how tracks will be numbered Note:If there is on the recorded disc. The default mode is Manual. In that mode for either digital or analog recordings, you must add track numbers manually by pressing the TRACK for pause in the playback than 3 seconds for digital a signal recordings and recordings, the more 10 seconds for analog unit will stop the recording.
CD RECORDING DISPLAY PREV.( RECORD LEVEL ) NEXT( ) SERCH SEARCH DUAL RANDOM SELECT PLAY/ SELECT REC LEVEL DUAL DISPLAY PREV. NEXT P EV. NEXT INPUT DISPLAY 5 PLAY PAUSE STOP PLAY PAUSE STOP PREV.( 6 4 OPEN/CLOSE 7 OPEN/CLOSE 3 ) PREV. 9 PAUSE 11 0 REC CD SYNC DUBBING ERASE FINALIZE ) 8 2 POWER NEXT( NEXT STOP( STOP ) PROG. SPEED PLAYBACK PHONES PHONE LEVEL REC/PLAY CDP ADR 620 DIGITAL IN AUDIO CD CDR PROG.
CD RECORDING 1. To erase only the last track, press the ERASE button. Note that the Information Display will display 01 TRK and the ERASE Indicator will flash. 2. Press the SELECT button within three seconds and note that the ERASE Indicator will stop flashing. 3. When the ERASE Indicator goes out the Information Display will show the total number of tracks that now remain on the disc. You may erase more counting backwards from the last track. than one track, 1. Press the ERASE button.
TROUBLESHOOTING GUIDE AND ERROR MESSAGES TROUBLE SHOOTING GUIDE SYMPTOM POSSIBLE CAUSE No AC power Unit does not operate when Power switch is SOLUTION Make certain AC power cord is plugged into a live outlet. see if AC outlet is switch controlled.
TECHNICAL SPECIFICATIONS Format Signal ¡ Signal Format Playback Sampling Frequency 44.1 kHz D/A Conversion 96 kHz, Multi-Bit Oversampling 128 Times Playback Specifications ¡ Record Specifications Power Power Requirement Consumption 20,050Hz 105dB 100dB 0.01% 2V ( 80dB) RMS, 0.15V 0.
P/NO : 3828R-D007L
