Owner's Manual

REMOTE CONTROL FUNCTIONS
-12-
Display
Control
:
Press this button to
cycle through
the various time
display
options
for the disc
in
the
Play
Deck
and
Record Deck.
Numeric
Keys
:
Press these buttons to
access a
specific
track for
playback
or
during
the
programming process.
Reverse Search :
Press this button to
play
the selected disc
in
reverse to locate
a desired
passage.
Dual
Playback
:
Press this button to
enable both CD Decks to
play
back at the
same time and function as
separate,
independent
CD units.
In
this mode
it
is
also
possible
to record from an external
source while the
Play
Deck is
functioning
as a standard CD
player.
Play
/
Select
:
This button has two
functions.
It will
most often be used as a
standard
play
button,
but when
setting up
certain record
functions,
it
is also used as
an Enter or Select button.
Previous-Track
Skip
:
Press this button
to
skip
backwards to the
beginning
of the
track
currently being played.
Press
it
a
second time to move back to the
beginning
of each
previous
track.
Pause :
Press this button to
momentarily
pause playback.
Press
it
again
to resume
playback.
Program
:
Press this button to
begin
the
programming sequence
for one of the
CD decks.
Play
(CDP)-Deck
Select
:
Press this
button to control or
program
the functions
of the disc
in
the
Play
Deck.
Program
Check :
Press this button to
check or edit a
programmed playback
sequence.
Repeat
:
Press this button once to
repeat
the current track. To
repeat
an entire
disc,
press
the button
twice,
and then
press
the
Play
/
Select button.
Clear :
Press this button to clear an item
in
a
program sequence.
Record
Button
:
Press this button to
begin
a manual
recording.
Dubbing
:
Press this button to
begin
a
dub.
Input
Select
:
Press this button to select
the
input
source
(analog, digital-coaxial
or
digital optical)
for
recording.
Play
(CDP)-Deck
Open
:
Press this
button to
open
the
Play
Deck.
Record
(CDR)-Deck
Open
:
Press this
button to
open
the
Record Deck.
Automatic
/ Manual Track
Increment
Selector
:
Press this button to select
between automatic and manual track
increments
during
a
recording
session.
Track
Increment
:
When the Manual
mode for track increment is selected
during recording, press
this button to
increase the track number.
NOTE :
This
function does not
operate during
CD
Sync
or dub
recording.
CD
Sync
:
Press this button once to
begin
an automated
recording
of a
single
track from an external CD
player
when a
digital
connection is used. Press
it
twice
to
begin
automated
recording
of an entire
disc.
Speed
Select
:
Press this button to
select the
recording speed
for internal
dubs.
Erase
Button
:
Press this button to
initiate the erasure of a track or of an
entire CD-RW disc or to Unfinalize a disc.
Note that erasure is
only possible
on CD-
RW
discs.
Finalize :
Press this button when a
recording
is
complete
to initiate the
finalization
process.
The
Play
/
Select
button on the Record deck or remote
control must be
pressed
within
three
seconds to activate finalization. Until this
button is
pressed
and the finalization
process
is
complete,
CD-R discs
may
not
be
played
on conventional CD machines.
A-B
Repeat
:
Press this button to
specify
a
segment
of a disc for
repeat play.
Record
(CDR)-Deck
Select
:
Press this
button to control or
program
the functions
of the disc
in
the Record Deck.
Stop
:
Press this button to
stop playback
or
recording.
Next
Track :
Press this button to
skip
forward to the next track on a disc.
Random
Play
:
When the CD Deck is
stopped, press
this button to
begin
random
play
of all tracks on a disc.
Forward Search :
Press this button to
play
a disc
in
a fast-forward mode.
1 11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
2
3
4
5
6
7
8
9
10