Owner's Manual

CD RECORDING
-25-
1. To erase
only
the last
track,
press
the
ERASE
button. Note that the Information
Display
will
display
01
TRK
and the
ERASE Indicator
will
flash.
2. Press
the
SELECT
button within three
seconds
and note that the ERASE
Indicator
will
stop flashing.
3. When the ERASE Indicator
goes
out the
Information
Display
will
show the total
number of tracks that now remain on the
disc.
You
may
erase more than one
track,
counting
backwards from the last track.
1. Press
the
ERASE
button. Note that the
Information
Display
will
display
01
TRK
and the ERASE Indicator
will
flash.
2. Press
the
NEXT[ ]
button
or PREV.
[ ]
button until the number of tracks to
be erased
appears
in
the Information
Display.
For
example,
when 06
TRK
appears
in
the
display
a total of six tracks
will
be
erased,
counting
back from the last track
on the disc.
3. Press
the
SELECT
button within three
seconds
of
making
the track selection
and note that the ERASE Indicator
will
stop flashing.
When the ERASE Indicator
goes
out the Information
Display
will
show the total number of tracks that now
remain on the disc.
Important
Note: Tracks at the
beginning
or
in
the middle of the disc
may
not be erased
until all of the discs after them have been
erased.
Important
Note
on Erasure and
Finalization
Times:
Regardless
of the
speed
at which a disc was
recorded,
the unit
will
erase and finalize discs at the
4x
speed
to minimize the
length
of the
process.
However,
in
some cases
it
may
be
necessary
for the unit to
repeat
the erasure
or finalization due to the nature of an
individual disc. For that
reason,
it
is normal
for the time
required
to
complete
these
steps
to
vary
from one disc to another.
ENGLISH