OWNER’S MANUAL 3D GLASSES Please read this manual carefully before operating and keep it for future reference. AG-S230 AG-S250 AG-S270 SAC34026210_5 www.lg.
CAUTION 10 Do not spray cleaner directly onto the surface of the product. This may result in discoloration and cracks and may cause the screen display to peel off. 11 Do not let water come into contact with the product when cleaning it. Ensure that water does not enter the product. This may result in electric shock or fire. 12 Since the lens of the product is easily scratched, make sure to clean the product with a soft cloth.
FEATURES ꔛꔛ AG-S230/S250/S270 are 3D glasses using RF(2.4GHz) wireless communication. ꔛꔛ If the device is connected to the TV or PROJECTOR that supports the RF glasses, you can enjoy the vivid 3D images. ꔛꔛ You can enjoy movies or pictures made as 3D. ACCESSORIES ENGLISH 3D Glasses 8-pin mini USB cable Manual CD Quick Start Guide Pouches ! NOTE ▶▶The accessories represented in this manual may differ from the actual appearances.
! ! CHARGING THE GLASSES ? ? 1 Connect the USB port located under the power button on the glasses to the USB port of the TV or PC using the supplied 8-pin mini USB cable as shown by the figure. CAUTION ▶▶Do not insert the supplied 8-pin mini USB cable in the reverse direction. Otherwise, this may cause damage to the product. ENGLISH i.e) AG-S250 ! 2 Charge the glasses until the LED is green. The glasses will fully charge in about 1 hours 50 ! minute. ! NOTE ▶▶While charging: The LED is red.
SPECIFICATIONS AG-S230 / S250 AG-S270 ENGLISH Shutters Liquid crystal Liquid crystal Contrast Ratio Max. 1000:1 Max. 2000:1 Transmittance Over 34 % Over 34 % Field Rate 120 fields/s 120 fields/s Open Time Under 2.0 ms Under 2.0 ms Close Time Under 0.3 ms Under 0.
For warranty service, please keep this warranty certificate and your receipt to validate proof of purchase.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.