Video Cassette with Line Player Recording OWNER'S MANUAL MODEL PAL NTSC : AL152W CH01 Before connecting, operating, please read this instruction booklet or adjusting this product, carefully and completely.
Position your VCP so that no sunlight falls directly onto it. F e a t u r e s Precautions, Contes& Do not 2 Controls & Sockets 3 to a TV 4 Video Channel 5 Remote Control Functions 6 On Screen 7 moisture, dust Tuning or heat. electrical storms it is advisable to damage plug to prevent to your VCP and TV. Your VCP should not be service repaired by personnel. in Playing operate your VCP if it is damaged.
Each button your VCP has the on corresponding button control. (see page 6.) as its Power (On/Off) Stop (see & same on function the remote Tape Eject OPR page 9.) Cassette Automatic Function Indicators Audio/Video IN/OUT (AC 100-240V, 50/60 Hz) Fast Forward Play Remote Record Control Sensor Tracking (see page 8.) Mains Lead Rewind Compartment System Selector (see page Channel Selector (see page 5.) 7.) RF.OUT (connect to TV your using this socket) YourVCP'sntl RF.
The ToaTV Conecting on this page is the most common form of connection. However please check with your manufacturer's instruction books for specific information. Make sure all connections are made with both your VCP and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting a guidance given VCP using Audio/Video cable is one of the best ways to achieve optimum sound and picture quality from video-tape playback.
Your TV receives signals You have to select from the video a player (VCP) channel number like another TV station. your TV and tune it in so that you may watch video tapes. TV set equipped with AUDIO and VIDEO sockets this adjustment will not on If you connect a monitor or a be necessary, simply select the AV mode 1 on your TV. 2 Make that you have installed your described earlier in sure Insert 3 a video pre-recorded correctly tape into your VCP and VCP press PLAY.
Your video player (VCP) is designed that almost all of its features so CONTROL HANDSET. Some features RemotCnrl Locatin&Fu must also be on or on to on play REC Rewinds the tape. Reverse a is FF high speed picture play. REW FF STOP LP/EP DISPLAY P/STILL To stop the tape. still picture. MENU screen. a TRK type arrow. Put the two batteries into MENU SELECT display the compartment sure the and making are correctly positioned.
On Screen Display gives you information about the tape counter and operational mode of your VCP. Some functions of this video player can be set and altered on the TV screen using the remote control with On Screen Display . MENU OSD Press MENU to main display the menu. Press to select the or desired FUNCTION OSD Select the colour system used for playback and recording. Each press of OK changes system as shown Press DISPLAY to repeatedly. Press MENU to remove display the function OSD. below.
This VCP is How to designed to play back and record cassettes systems. You will only be able Getting When playbcktpe better eject using PAL, MESECAM, and NTSC video cassettes when your VCP is (3.58 or 4.43) colour plugged into the mains. picture playback started, the automatic tracking function works to get the best possible picture automatically. "AUTO TRACKING" will appear on the TV screen while it is doing this.
Video Head Whenever Cleaning ejected from your VCP the video head is automatically cleaning should not be necessary. However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. a video cassette is inserted into cleaned. This should 4 Press P/STILL to still a picture.
Other PlaybckFeturs 1 2 Press Repeat playback If you want to play back tape repeatedly, set 3 a REPEAT to ON. to select or REPEAT. automatically rewinds tape to the beginning and repeats playback continuously. Press OK to switch REPEAT ON OFF. or Press MENU. Press MENU to menus from TV When the end of the tape is reached, VCP remove screen. to watch a during rewind. reverse DISPLAY MENU TRK DISPLAY TRK OK SELECT Release the button to return to REPEAT F.
Your VCP is vehicle designed or a for in-home 12V DC power or portable use. You can power it from the Input Socket Plug DC power cord into either the 12-volt DC outlet cigarette lighter socket. Plug the other end into the DC input socket on your VIDEO AERIAL IN VCP. OT TO AUDIO/VIDEO IN TO AUDIO/VIDEO OUT RF.OUT 40 AO 32 VO OUT CHANNEL AERIAL K + DC IN 12V G IN are designed for negative ground electrical systems.
Your VCP allows you to make How to record 1 recordings connecting to a TV 2 Connect your VCP to as shown below. a TV Press POWER to turn equipped with AUDIO and VIDEO sockets. 3 on your VCP. Insert 4 a video cassette with the record protection tab Set the desired recording speed by pressing LP/EP. into your VCP. Your external aerial must be in your TV.
6 5 Press REC to start 7 Press P/STILL to avoid recording unwanted recording. scenes. During recording of TV programme you do not change the TV channel number on your TV. Press STOP to end recording. indicator flashes in the display window. REC Press P/STILL continue again recording. Tapes be 5 can paused to FF W STOP P LP/EP for up to minutes; PAUSE will be displayed when a tape is paused. After 5 minutes your VCP will stop recording to prevent damaging the tape or your VCP.
Make T a p e s Dub ing all connections sure damaging your 1 are made with both your VCP's and Television 2 Connect your VCP to another VCP as shown Press POWER to turn on Insert a tape with the record Insert protection tab into (recording) VCP. a pre-recorded Press STOP to stop blank video your VCP. source Aerial recording. your tape into another (playing) VCP.
Check the No ? ? ? ? picture following & no Is the mains before calling for service. Power ..................................AC 100-240V, 50/60Hz +3 DC 12 -0 V, 1.2A sound plug plugged Is the TV switched on General in and switched Power ? on consumption.............Approx. 13 Watts .........................Tape Width 12.7 mm (0.5 inch) Dimensions (W x H x D) .....360 x 94.5 x 278 mm Weight .................................Approx. 3.4 Kg. Operating temperature ........
P/N: 3834RP0045B
