Use and Care Guide

22
ENGLISH
Hygiene Drying Function
The Hygiene Drying function is turned on by default. After
Humid Purify mode is used, the Hygiene Drying function
runs the fan for 1 – 1 ½ hours to dry the water bucket lters
and prevent the buildup of mold or bacteria.
• When the Hygiene Drying function is running,
(hygiene
drying) appears in the status display panel.
• To turn off the Hygiene Drying function, press and hold
the Off Timer and Light buttons for about 3 seconds.
• The Hygiene Drying function should not be turned off.
Turning off the Hygiene Drying function may result in a
buildup of mold, bacteria, and odor.
Off Timer Light
At the same time
for about 3 seconds
Note
• The Hygiene Drying function can be turned on or off by
pressing and holding the Off Timer and Light buttons for
3 seconds.
• The product must be running in order to turn the Hygiene
Drying function on or off.
Counter Reset Function
After replacing the deodorizing Black Filter, reset the usage
time counter.
• When the deodorizing Black Filter's counter reaches
4,000 hours, the
icon and the error code appear
in the status display panel.
• If the
icon and the error code appear, replace
the deodorizing Black Filter with a new one.
• After replacing the lter, press and hold the Humidity
button for 3 seconds to reset the total usage time.
Note
• When the counter is reset, the icon and error
code will disappear.
• For details on how to replace the deodorizing Black Filter,
see page 33.