Use and Care Guide
23
ENGLISH
Filling the Water Bucket
You can pour the water into the water bucket directly or
through the Easy Fill Inlet.
Using the Easy Fill Inlet
To use, turn off the product, ll a container with water, and
slowly pour the water into the inlet in the center of the top
cover. Add water gradually until a chime sounds and the
Full Water icon
is lighted in the water level indicator.
• The water level indicators light up and chimes sound
more and more quickly as the bucket gets close to full.
• The capacity of the water bucket is 0.8 gallons (3.2
liters).
Caution
• Plug in and turn OFF the product before using the Easy
Fill inlet.
• Do not ll the water bucket with the top cover ipped
over.
• If water overows the water bucket, there is a risk of
electric shock or property damage. Pour water into the
Easy Fill inlet slowly, paying attention to the chimes. Stop
pouring immediately when the Full Water
indicator
appears.
Pouring Water into the Water
Bucket
If you want to add a large amount of water at once, pour the
water into the water bucket directly.
1
Detach the water bucket from the product and remove
its lter from the water bucket.
• For more information on how to detach the lter
from the water bucket, refer to Maintenance on
page 29 and 31.
2
Fill the water bucket to the FULL line on the inside of
the bucket.
Inside water bucket
3
Mount the water bucket on the product.
• For more information on how to mount the water
bucket, refer to Assembling Water Bucket on
page 32.