Use and Care Guide

33
ENGLISH
3
Put the top cover back on.
• Align the top cover so that its contact connectors
meet the contact connectors on the body of the
product.
Contact connector
(inside)
Note
If the water bucket and cover are not properly
mounted,
/ appears in the display, and the
Watering Engine™ will not work.
Cleaning the Air Purier
Filters
Cleaning the Ultra Fine Filter
(Pre-lter)
1
Pull out the ultra ne lter (pre-lter) located beneath
the lter tray.
2
Rinse the ultra ne lter (pre-lter) under running water.
• If the ultra ne lter (pre-lter) is very dirty, wash in
a solution of water and neutral detergent.
3
Place out of direct sunlight and allow to dry
completely.
4
Reassemble the ultra ne lter (pre-lter) in the lter
tray and insert the tray in the main body.
• Insert the ultra ne lter (pre-lter) in the tray with
the handle facing up. If the lter or the tray are not
assembled properly,
/ will appear in the
status display panel.
Ultra ne lter
(pre-lter) handle
Replacing the Deodorizing Black
Filter
1
Press the lter tray release button to open the lter tray.
2
Open the lter tray and separate the deodorizing
Black Filter.