Use and Care Guide

34
ENGLISH
3
Place a new deodorizing Black Filter in the lter tray.
• Be sure to align the slots on the bottom of the
deodorizing Black Filter with the tabs on the lter
beneath it.
4
Insert the lter tray into the product.
Caution
Do not wash the deodorizing Black Filter with water. It may
shorten the lter lifespan or stain the product.
Cleaning the PM 1.0 Black Filter
1
Press the lter tray release button to open the lter
tray.
2
Slide the lter tray out completely and remove the
PM 1.0 Black Filter from under the deodorizing Black
Filter.
• Do not attempt to separate the two sections of the
PM 1.0 Black Filter.
3
Soak only the PM 1.0 Black Filter in a solution of
water and neutral detergent for about 30 minutes.
(The deodorizing Black Filter cannot be washed.)
• Make sure the neutral detergent is completely
dissolved in warm water (95 – 104°F / 35 – 40°C).
• Fully immerse the PM 1.0 Black Filter in the soapy
water.