Owner's Manual

18 Multi Type Air Conditioner
Operating Instructions
Sleep Mode
Setting the Time
Delay Start/Pre-Set Stop
Delay OFF Timer Delay ON Timer Delay OFF and ON Timer Delay ON and OFF Timer
1. Press the Sleep Mode Auto button to set the time
you want the unit to turn off automatically.
1. The Timer is programmed in one-hour increments
by pressing the Sleep Mode Auto button 1 to 7
times.
The sleep mode is available for 1 to 7 times.
To alter the time period in steps of 1 hour, press
the Sleep Mode Button while aiming at air
conditioner.
3. Make sure the Sleep Mode Auto LED lights up.
To cancel the Sleep Mode, press the sleep Mode
Auto button several times until the star
( ) disappears from the operation display.
: The Sleep Mode will be operated at low fan speed
(cooling) or medium fan speed (heat pump only) for
quiet sleeping.
IN COOLING MODE: The temperature will
automatically rise by 1°C over the next 30 minutes
and by 2°C in 1 hour for comfortable sleeping.
NOTICE
1. Time can be set only when you have pressed the
Reset button. If you have just replaced the batteries,
the Reset button should be pressed to reset the
time.
Press the Start/Stop button.
2. Press 2
nd
F button
and check if 2
nd
F icon is on.
3. Press the Time Setting buttons until the desired time
is set.
4. Press the Timer SET button.
: Check the indicator for A.M. and P.M.
NOTICE
1. Make sure the time is set correctly on the Remote
Controller display.
2. Press 2
nd
F button.
3. Press the ON/OFF Timer
buttons to turn Timer on or off.
4. Press the Time Setting
buttons until the desired
time is set.
5. Press the selected on/off setting by
pressing the Timer SET button while
aiming the Remote Controller at the
signal receptor.
To cancel the setting the timer.
Press the Timer Cancel button while aiming
Remote Controller at the signal receptor.
(The timer lamp on the air conditioner and the
display will go out.)
: Select one of the following four types of operation.
NOTICE
with the unit running
ON
OFF
CANCEL
SET
Additional features
CANCEL
SET
CANCEL
SET