Visit us at http://www.lgservice.com OWNER'S MANUAL FRANÇAIS Dear Owner Thank you for installing LG air conditioner. Your best choice guarantees you a great performance and service to make your life comfortable & pleasant. ESPAÑOL Prior to installation, this airconditioning unit must be submitted for approval by the utility service which provides electricity (EN 61000-2, EN 61000-3 Norm).
Room Air Conditioner Owner’s Manual TABLE OF CONTENTS A. Safety Precautions ..............................3 B. Prior to operation ................................6 Preparing for operation..........................6 Usage ....................................................6 Cleaning and maintenance....................6 Service ..................................................6 Symbols Used in this Manual ................6 C. Operating Instructions........................7 How to insert the Batteries .....
Safety Precautions Safety Precautions This symbol indicates the possibility of death or serious injury. This symbol indicates the possibility of injury or damage. ■ Meanings of symbols used in this manual are as shown below. Be sure not to do. Be sure to follow the instruction. Do not use a defective or underrated circuit breaker. Use the correctly rated breaker and fuse. • There is risk of fire or electric shock . Always ground the product as per the wiring diagram.
Safety Precautions Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installation or svc and then tear away and thraw away the plastic packaging bags. Do not use damaged power cable. • Children may play with them and cause injury. • It will cause fire or electric shock. Do not touch, operate or repair th product with wet hands. Do not place a heater or other heating appliances near the power cable. • Ther is risk of electrical shock or fire.
Safety Precautions Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. • There is risk of damage or loss of property. • There is risk of personal injury. Do not insert hands or other objects through the air inlet or outlet while the product is operating. • There are sharp and moving parts that could cause personal injury. Do not tilt the unit when removing or uninstalling it.
Prior to operation Prior to operation Preparing for operation 1. Contact an installation specialist for installation. 2. Connect the power cable between indoor unit and outdoor unit properly. 3. Use a dedicated circuit. 4. If the cord/plug is damaged, replace it with only an authorized replacement part. Usage 1. Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time. 2.
Operating Instructions Operating Instructions How to insert the Batteries ENGLISH 1. Remove the battery cover by pulling it according to the arrow direction. 2. Insert new batteries making sure that the (+) and (-) of battery are installed correctly. 3. Reattach the cover by sliding it back into position. NOTE 1. Always use/replace both batteries of same type. 2. If the system is not to be used for a long time, remove the batteries to save their working life. 3.
Operating Instructions Wireless Remote Controller The controls will look like the following. Signal transmitter 1. START/STOP BUTTON Operation starts when this button is pressed and stops when the button is pressed again. 2. OPERATION MODE SELECTION BUTTON Used to select the operation mode. 3. ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. 5 6 4. INDOOR FAN SPEED SELECTOR Used to select fan speed in four steps low, medium, high and CHAOS. 1 5.
Operating Instructions Operation Mode 3 Press the START/STOP BUTTON to turn the unit on. The unit will respond with a beep. 2 Open the door of the remote controller and press the operation mode button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. ENGLISH 1 1 4 ON 3 4 2 Cooling Auto Healthy Dehumidification For cooling or heating operation set the desired indoor temperature by pressing the ROOM TEMPERATURE SETTING BUTTONS.
Operating Instructions Healthy Dehumidification Operation Healthy Dehumidification During Healthy Dehumidification Operation ❏ If you select the dehumidification mode on the OPERATION MODE SELECTION BUTTON, the product starts to run the dehumidification function. It automatically sets the room temperature and airflow volume to the best condition for dehumidification, based on the sensed current room temperature.
Operating Instructions NEO PLASMA Purification Operation (Optional) Plasma purification can be started by pressing the PLASMA BUTTON on the remote controller. Repressing it will deactivate the operation. NOTE This feature can be used in any operation mode and any fan speed can be used while plasma filter is functioning. Auto Clean ❏ During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification operation can be removed. 1.
Operating Instructions Sleep Mode 1. Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically. 2. The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7 times. The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the SLEEP MODE AUTO BUTTON while aiming at air conditioner. NOTE • The sleep mode will operate indoor fan at slow speed in cooling and heating mode for pleasant sleep.
Operating Instructions Airflow Direction Control Press the Start/Stop button to start the unit. Press Chaos Swing button and the louvers will swing. ENGLISH The up/down and right/left airflow can be adjusted by using the remote control. Press the button again and the louvers will stop. After 30 minutes, the louvers return to the maximum airflow position automatically. Air Circulation Mode This operation circulates the air without cooling or heating.
Operating Instructions Maintenance and Service Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and unplug the power cord. Indoor Unit Clean the unit with a soft dry cloth. Do not use bleach or abrasives. Never use any of these • Water hotter than 40°C. It may cause deformation and discoloration. • Volatile substances. They may damage the surface of the air conditioner.
Maintenance and Service How to replace picture & photograph(Optional) 1. Turn off power and then open the upper part of front panel. part of front panel, as described in the below picture. 5. Turn upside-down of the picture and turn over mat, then take off a protective tape attached at the mat. 3. Push and close the top part of the front panel and then pull the bottom part of the panel forward until it is secured. 6. Place the picture/photograph between the exited picture and mat.
Maintenance and Service When the air conditioner is not going to be used for a long time. When air conditioner is not going to be used for a long time. 1. Operate the air conditioner on Air circulation mode (Refer to page 13) for 2 to 3 hours. • This will dry out the internal mechanisms. 2. Turn off the circuit breaker, and disconnect the power cable. Turn off the circuit breaker when the air conditioner is not going to be used for a long time. Dirt may collect and may cause a fire. 3.
Maintenance and Service Troubleshooting Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center. Explanation See page 9 The air conditioner does not operate. • Check room temperature setting? • Check if circuit breaker is on? The room has a peculiar odor. • Check that this is not a damp smell exuded by the walls, carpet, furniture, or cloth items in the room.