OWNER’S MANUAL MAGIC MOTION REMOTE Please read this manual carefully before operating your set and retain it for future reference. AN-MR200 Remote control (AKB732955) RF Dongle (EAT614134) www.lg.
ACCESSORIES ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 7 0(18 8 9 0 FLASHBK LIST 6 MARK FAV ENTER VOL 3D CH P A G E MUTE MENU INFO VOL ENTER BACK MUTE Q.MENU CH EXIT L/R SELECT FREEZE RATIO Magic Motion Remote Control Owner’s manual and Batteries (AA) RF Dongle RF Dongle Cable Strap Velcro REMOTE DESCRIPTION Pointer (RF transmitter) Blinks the light when operating. POWER Turns the TV on or off.
RF DONGLE Use LED LCD TV/LCD TV Only. PDP Model (50/60PZ95/75/57**) don’t need this device. PDP TV is built in. 3 Attach the RF Dongle to the velcro as shown below and then turn on the TV. Cable IN Lamp *If the RF Dongle for the wireless media box is attached, attach the RF Dongle for the Magic Motion remote control on the below right of the back of the TV. INSTALLING RF DONGLE Image shown may differ from your TV. 1 Locate the designated Velcro attachment location on the TV.
REGISTERING PRECAUTIONS TO TAKE The Magic Motion Remote Control operates by pairing with your TV. ENTER OK ENTER OK MUTE How to register the Magic Motion Remote Control To register the remote control, press the ENTER (or OK) button on the remote control while aiming it at your TV. How to Re-register the Magic Motion Remote Control after Registration Failure Reset the remote control by pressing and holding both the ENTER (or OK) and MUTE buttons for 5 seconds.
