Owner's Manual

Part
Descriptions
10
*
Lamp
Indicator,
operation
indicator and
temperature
indicator at the
top
of the
projector
show the user the
operating
status
of the
projector.
*
If
operation
indicator is
red,
it's state of
checking
the closed door or shutter.
Lamp
Indicator
Temperature
Indicator
Operation
Indicator
Projector
Status Indicators
Operation
Indicator
Lamp
Indicator
Temperature
Indicator
Orange
Green(flashing)
Green
Orange(flashing)
Off
Red
Red(flashing)
Green(flashing)
Orange(flashing)
Orange
Red
Red
(flashing)
Standby.
Lamp cooling
until the
lamp
turn on.
On
operation. (Turn
on the
lamp)
Projector lamp
is
cooling
as
power
out
(2 minutes)
Power off.
Projector lamp
is
reaching
the end of its life and needs
to be
replaced
with a new
lamp. (over
4000
hours)
The
OSD,
"Replace
the
lamp"
is
displayed
5 seconds
from the first
power
on.
The
projector
has trouble in the
lamp
or around it at
power-on. Retry
Power On
again
later. If
lamp
indicator
is red
(flashing) again,
contact a service center.
The
lamp
cover is not closed.
It's state of not
opening
well the door or shutter. Contact a
service center.
This
projector
is in
high temperature.
Turn the
power
of
projector
off and check the ventilator.
The
projector
is turned off as its
high temperature.
Power has turned off due to
problem
with the
internal
cooling
fan. Contact a service center.