Owner's Manual

RS-232C
40
13. Low Power
(Command1:j, Command2:q)
To reduce the
power consumption
of the
projector.
Transmission
Data 0 : Low Power
Off(Normal)
1 : Low Power
On(Silent)
Data 0 : Low Power
Off(Normal)
1 : Low Power
On(Silent)
[j][q][][SetID][][Data][Cr]
[q][ ][SetID][ ][OK][Data][x]
Ack
14.
Auto
Configure (Command1:j, Command2:u)
To
adjust picture position
and minimize
image
shaking automatically.
It works
only
in RGB mode.
Transmission
Data 1:Toset
Data 1:Toset
[j][u][][SetID][][Data][Cr]
[u][ ][SetID][ ][OK][Data][x]
Ack
15.
Input
Select
(Command1:x, Command2:b)
To select
input
source for the Set.
Transmission
Data 20 : Video 30 : S-Video
40 :
Component
50 : RGB-DTV
60 : RGB-PC 70 :
HDMI(DVI)-DTV
80 :
HDMI(DVI)-PC
Data 20 : Video 30 : S-Video
40 :
Component
50 : RGB-DTV
60 : RGB-PC 70 :
HDMI(DVI)-DTV
80 :
HDMI(DVI)-PC
[x][b][][SetID][][Data][Cr]
[b][ ][SetID][ ][OK][Data][x]
Ack
12.
Color
Temperature (ACC) (Command2:u)
Adjust
the color
temperature.
Transmission
Data 0 : Normal 1 : Cool 2:Warm
Data 0 : Normal 1 : Cool 2:Warm
[k][u][][SetID][][Data][Cr]
[u][ ][SetID][ ][OK][Data][x]
Ack