Owner's Manual

Connection
23
Connecting
to a Video Source
<Howtoconnect1>
a. Connect the Video
input jacks
of the
projector
to the
output jacks
of the A/V source with Video cable.
<Howtoconnect2>
b. Connect the S-Video
input jack
of the
projector
to the
S-Video
output jack
of an A/V source with an S-Video
cable.
*
You can
get
better
picture quality
when
connecting
S-Video source to the
projector.
S VIDEO
(R)
AUDIO
(L)
VID EO
OUT
IN
*
You can connect a
VTR,
a
camcorder,
a LDP or
any
other
compatible
video
image
source to the
projector.
<VCR>
Connecting
to a DVD
< How
to connect
>
a. Connect the DVD
Component
cable to the
RCA to D-Sub
Adaptor
and then connect the
RCA to D-Sub
Adaptor
to
RGB
Input
(PC/DTV)
of the
projector.
*
When
connecting
the
component
cable,
match the
jack
colors with the
component cable.(Y=green,
PB=blue,
PR=red)
b. If the DVD has HDMI
output,
connect HDMI
cable to HDMI
Input
of the
projector.
c. If the DVD has DVI
output,
connect HDMI to
DVI cable to HDMI
Input
of the
projector.
*
If
connecting
the
HDMI,
audio is not
supported.
d. Use a DVD with
Component 480i(576i)/
480p(576p)/720p/1080i
mode.
PR
PBY (R)
AUDIO
(L) HDMI
OUTPUT
DVI OUTPUT
*
The
output jacks (Y,
PB,
PR)
of the DVD
might
be labelled as
Y, Pb,
Pr /
Y, B-Y,
R-Y /
Y, Cb,
Cr
according
to the
equipment.
<DVD>
RCA to D-Sub
Adaptor
Component
cable
HDMI to DVI cable
HDMI cable