Owner's Manual

12
ENGLISH
PRODUCT INTRODUCTION
3
1
5
9
11
10
7
2
4
8
6
Cooling only
Handling the remote control
- Aim at the signal receptor on the floor standing type air condi-
tioner when operating.
- The remote control signal can be received at a distance of up
to about 7 meters.
- Be sure that there are no obstructions between the remote
control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to di-
rect sunlight, or next to a heating unit, or other heat source.
No.
Control
panel
Description
1
a
Cooling button
2
Timer setting button : Used to set the time
of stopping.
3
b
Auto operation button : Auto heating and
cooling operation is conducted in accor-
dance with setting temperature.
4
!
x
Air flow direction button : Adjusts air flow
direction vertically or horizontally.
5
c
Dehumidification button : Can effectively
be removed when at the time of rainy sea-
son or high humidity.
6
@
Power (cooling/heating) button : Powerful
cooling/heating are performed within short
time.
7
f
Fan mode button
8
$
Indoor fan speed button : To select the de-
sired fan speed in 3 steps (Low, Mid, High)
9
*
Power ON/OFF button : Operation will
start when this button is pressed, and stop
when the button is pressed again.
10
#
Temperature setting button
11
Auto air flow operation button