ENGLISH OWNER’S MANUAL AIR CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. FLOOR STANDING www.lg.
TIPS FOR SAVING ENERGY ENGLISH TIPS FOR SAVING ENERGY Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below: • Do not cool excessively indoors. This may be harmful for your health and may consume more electricity. • Block sunlight with blinds or curtains while you are operating the air conditioner.
IMPORTANT SAFETY INSTRUCTIONS 3 READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product ! WARNING It can result in serious injury or death when the directions are ignored ! CAUTION It can result in minor injury or product damage when the directions are ignored ! WARNING • Installation or repairs by unqualified persons can result in hazards to you and others.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH Operation • Take care to ensure that power cable could not be pulled out or damaged during operation. There is risk of fire or electric shock. • Do not place anything on the power cable. There is risk of fire or electric shock. • Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock. • Do not place a heater or other appliances near the power cable. There is risk of fire and electric shock.
IMPORTANT SAFETY INSTRUCTIONS 5 • Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant levels may cause failure of product. • Install the drain hose to ensure that water is drained away properly. A bad connection may cause water leakage. • Keep level even when installing the product. To avoid vibration or water leakage. • Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods.
TABLE OF CONTENTS ENGLISH TABLE OF CONTENTS 2 TIPS FOR SAVING ENERGY 16 MAINTENANCE AND 3 IMPORTANT SAFETY INSTRUCTIONS 16 17 18 7 BEFORE USE 18 7 7 7 7 Preparing for operation Usage Cleaning and maintenance Service 8 PRODUCT INTRODUCTION 8 9 10 11 Name of parts Indoor unit controls and indicators Wireless remote controller Remote control preparation 12 OPERATING INSTRUCTIONS 12 12 12 12 13 13 13 13 14 14 15 15 Cooling Mode Heating Mode Airflow Setting Fan Speed Setting Dehumidification
BEFORE USE 7 Preparing for operation • Contact an installation specialist for installation. • Use a dedicated circuit. Usage • Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended period of time. • Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices. • Do not use this air conditioner for non-specified special purposes (e.
PRODUCT INTRODUCTION ENGLISH PRODUCT INTRODUCTION Name of parts Indoor unit 1 2 3 4 5 6 Left/Right Airflow Control Louver Up/Down Airflow Control Louver Display Panel Air filter Air Inlet Control Box 1 2 3 4 5 6
PRODUCT INTRODUCTION ENGLISH Indoor unit controls and indicators Heat Pump 1 3 5 6 4 2 11 MODE 7 8 1. Timer 2. Defrosting operation lamp 3. Cooling operation lamp 4. Heating operation lamp 5. Room temp. / Set temp. display 6. Indoor fan speed lamp 7. Start/Stop button 8. Operation mode selection button 9. Room temperature setting button 10. Indoor fan speed button 11.
PRODUCT INTRODUCTION ENGLISH Wireless remote controller Heat Pump 1 No. Control panel 1 r | Power ON/OFF button : Operation will start when this button is pressed, and stop when the button is pressed again. 4 Indoor fan speed button : To select the 2 5 3 4 6 2 7 8 9 3 10 11 4 12 13 5 6 Temperature setting button A B Cooling button Heating button Auto dry button : If setting this function, evaporator will be automatically dried before turning off the air conditioner.
PRODUCT INTRODUCTION 11 ENGLISH Remote control preparation How to mount onto a wall 1 Use the screws to secure the holder to the wall. 2 To insert the remote control to the holder. - Do not use rechargeable batteries such batteries are different from standard dry cells in shape, dimensions, and performance. - Change the batteries with a new one if the remote control does not work properly after using for an extended period of time.
OPERATING INSTRUCTIONS ENGLISH OPERATING INSTRUCTIONS Cooling Mode 1 Press | button to turn on the indoor. 2 Press a button to select Cooling opera- tion mode. - When canceling operating, press | button once more. 3 Adjust the desired temperature by pressing ( ) buttons. - If desired temperature is higher than room temperature, cooling cannot be conducted. - Set the temperature lower than the room temperature - Setting Temp Range : 18 °C~30 °C.
OPERATING INSTRUCTIONS 13 In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and cooling mode to remove humidity effectively. 1 Press | button to turn on the indoor. 2 Press c button to select dehumidification mode - Room temperature will be displayed after desired temperature is indicated at display section for about 5 seconds. Power Cooling/Heating Mode Strong cooling/heating will be conducted in short time. 1 Press | button to turn on the indoor.
OPERATING INSTRUCTIONS ENGLISH Defrost Mode Heat Pump 1 During defrost operation, M will be indicated at display section of indoor. MODE Child Lock Operation Function 1 Press the and high simultaneously for 3 seconds. Or press the X button on remote control. 2 During child lock operation, - Whenever you press any button on display panel, it will immediately display "CL", which means display panel is locked. - All the button on the indoor unit display panel will not work.
OPERATING INSTRUCTIONS 15 Auto Restart Operation 1 Auto dry function can be setted/released When power is supplied again after unit operation has been stopped because of interruption of power supply due to outage or other causes, auto re-operation will be performed by remembering previous setting. by manipulating indoor unit button or remote control.
MAINTENANCE AND SERVICE ENGLISH MAINTENANCE AND SERVICE Filter Cleaning Indoor Unit Grille, Case and Remote Control - Turn the system off before cleanining, To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives. ! Please clean it once in a week. 1 Remove the Air filters. - Take hold of the tab and pull slightly forward to remove the filter. ! CAUTION NOTE Supply power must be disconnected before cleaning the indoor unit.
MAINTENANCE AND SERVICE 17 1 Operate the air conditioner at the following settings for 2 to 3 hours. - Type of operation: Fan operation mode. - This will dry out the internal mechanisms. When the air conditioner is to be used again. 1 Clean the air filter and install it in the indoor unit. 2 Check that the air inlet and outlet of the indoor/outdoor unit are not blocked. 3 Check that the ground wire is connected ! CAUTION correctly. It may be connect to the indoor unit side.
MAINTENANCE AND SERVICE ENGLISH Troubleshooting Tips! Save time and money! Check the following points before requesting repairs or service.... If the malfunction persist, please contact your dealer. The air conditioner The room has a pecudoes not operate. liar odor. - Have you made a - Check that this is not mistake in timer oper- a damp smell exuded ation? by the walls, carpet, furniture or cloth - Has the fuse blown items in the room.
