ENGLISH OWNER’S MANUAL HIGH PERFORMANCE 3D A/V RECEIVER SYSTEM Please read this manual carefully before operating your set and retain it for future reference. ARX5500 (ARX5500, S72P2-F/W) NA7530D-FU.DZAFLLK_ENG_MFL67781455.indd NA7530D-FU.DZAFLLK ENG MFL67781455.
Getting Started Safety information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear.
Table of Contents Table of Contents 1 Getting Started 2 Connecting 2 6 6 6 6 6 7 8 10 11 Safety information Unique features Accessories Introduction – Symbols Used in this Manual – About the “ ” Symbol Display – Required cables Remote control Front panel Rear panel 12 12 13 14 14 16 17 18 19 19 Before connecting Positioning the system Connecting speakers Connecting video devices – Using an HDMI cable – Using a composite video cable Connecting audio devices Connecting other devices Connecting the
Table of Contents 5 1 4 Operating 5 Troubleshooting 23 23 24 24 26 26 26 26 26 27 27 28 28 29 30 32 33 33 33 33 Basic operations – Selecting the input source – Adjusting the speaker levels – Enjoying various sound mode Radio Operations – Listening to FM radio – Improving poor FM reception – Presetting the Radio Stations – Deleting the saved stations Playing the USB device – Basic operation – MP3/WMA music file requirement – Compatible USB Devices – Listening to music – Playing a movie file – Viewing
1 Getting Started Unique features Introduction Full HD up-scaling Symbols Used in this Manual Getting Started Views Full HD picture quality with simple setup. , Note Indicates special notes and operating features. 3D pass through Enjoys 3D contents such as 3D movie, game, etc. > Caution Indicates cautions for preventing possible damages from abuse. Accessories About the “ ” Symbol Display Please check and identify the supplied accessories.
Getting Started Required cables 7 Coaxial digital audio cable The hookup diagrams on the subsequent pages assume the use of the following connection cables. 1 USB cable Getting Started You must purchase the connection cables separately if necessary. Analog audio cable White (L) Red (R) HDMI cable Composite video cable Yellow Portable cable ( 3.
Getting Started Remote control • • • • • • • • • • a • • • • • • • • • 1 : Switches the unit ON or OFF. TV control buttons : Controls the TV. (LG TV only) - 1 : Turns the TV on or off. 1 Getting Started - AV/INPUT : Switches the TV’s input source between the TV and other input sources. INPUT buttons : Selects the input source you want to use. (page 23) - AV : Selects the input source connected to AV IN 1/2 jack. - PORTABLE : Selects the input source connected to PORT. IN jack.
Getting Started 9 • • • • • • • • • • b • • • • • • • • • • • • • • • • • • • d • • • • • • • • • C/V (SKIP) : Goes to the next or previous chapter / track / file. SETUP : Displays or exits the [SETUP] menu. c/v (SCAN) : Searches backward or forward. Z (Stop) : Stops playback. RETURN (x) : Moves backwards in the menu or exits the setup menu. M (Pause) : Pauses playback. ENTER ( • • • • • • • • • • c • • • • • • • • • MARKER : Marks music files on the [MUSIC] menu.
Getting Started Front panel 1 A B C D E F Getting Started G H I J A STANDBY/ON (1/!) Switches the unit ON or OFF. STOP Stops playback. B INPUT SELECTION Selects the input source. USER EQ Sets the USER EQ mode (BASS, MIDDLE and TREBLE). (page 24) C Display window Shows the current status of the unit. D Lighting The lighting turns on when the unit is switched on. E Remote sensor F MASTER VOLUME Adjusts the speaker volume. Turn MASTER VOLUME clockwise or counterclockwise.
Getting Started 11 Rear panel A B C D 1 Getting Started E F G H I A Speakers connectors Connects the speaker cables. E HDMI IN 1/2 Connects the component with HDMI output. B DIGITAL AUDIO IN 1/2 F HDMI OUT TO TV COAXIAL 1/2 Connects other components with a coaxial digital audio output. G AV IN 1 (VIDEO IN, L-AUDIO-R) Connects the components with analog audio/ video output jacks. OPTICAL 1/2 Connects other components with an optical digital audio output.
Connecting Before connecting Please make sure to disconnect the AC power cord before making any connection between the unit and any other device. Positioning the system 2 Connecting The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. B A F D C E NA7530D-FU.DZAFLLK_ENG_MFL67781455.indd NA7530D-FU.DZAFLLK ENG MFL67781455.
Connecting 13 2. Connect the wires to the speakers. Connect the other end of each wire to the correct speaker according to the color coding. Connecting speakers Front speaker (L) Color Speaker Position Black Orange Subwoofer Any front position Red Front Front right White Front Front left Red White 2 Orange > Caution Red Black Subwoofer Subwoofer Red Front speaker (R) 1. Connect the wires to the unit.
2 Connecting Connecting video devices 1. Connect the HDMI IN 1/2 jack on AV Receiver System to your video device with HDMI OUT jack using HDMI cable. You can watch the input image from your video device. There are two ways of connecting your video device to AV Receiver System. 3. Set the input source to HDMI (page 23). 2. Connect the HDMI OUT TO TV jack on AV Receiver System to the HDMI IN jack on your TV.
Connecting , Note HDMI is the abbreviated name for High Definition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. 15 Resolution Setting The unit provides several display resolutions for HDMI OUT TO TV jack. You can change the resolution by using [Setup] menu. 1. Press SETUP. The [Setup] menu appears.
Connecting Using a composite video cable To enjoy both sounds and pictures from your device, you have to connect analog audio cable as well as composite video cable. Audio cable 1. Connect the VIDEO IN jack on AV Receiver System to the VIDEO OUT jack on your video device using a composite video cable. 2. Connect the left and right AUDIO IN jacks of AV Receiver System to the left and right AUDIO OUT jacks on your video device using an audio cables. 3.
Connecting 17 1. Connect AV IN 1, COAXIAL 1/2 or OPTICAL 1/2 jack on AV Receiver System to your audio device’s OUTPUT jack you want. Connecting audio devices You can hear the sound from your TV, DVD player, Blu-ray player, CD player, etc. It is not necessary to connect all the cables. Connect AV Receiver System to an AV IN, a COAXIAL or an OPTICAL jack on your device you want to connect. 2. Set the input source to AV IN 1, COAXIAL 1/2 or OPTICAL 1/2 you connect (page 23).
Connecting Connecting other devices You can easily connect other devices (camcorder, game console, etc) to the jacks on the front panel of AV Receiver System. Video cable 2 1. Connect the VIDEO IN jack on the front panel of AV Receiver System to the VIDEO OUT jack on your device using a video cable. 2. Connect the left and right AUDIO IN jacks on the front of AV Receiver System to the audio left and right OUT jacks on your device using an audio cables. 3.
Connecting 19 Connecting the antenna Connecting portable devices 1. Connect the FM wire antenna to the FM antenna connector. 1. Connect the PORT. IN jack on AV Receiver System to the head phone or LINE OUT jack on your portable device (MP3 player, etc.) using a portable cable ( 3.5 mm stereo plug). 2 Connecting FM wire antenna 2. Set the input source to FM tuner (page 23). , Note MP3 player etc. Portable cable Be sure to fully extend the FM wire antenna.
System Setting Settings [Language] Menu Menu Language Adjusting the Setup Settings You can change the settings of the unit in the [Setup] menu. 1. Press SETUP. The [Setup] menu appears. Select a language for the [Setup] menu and onscreen display. [Display] Menu TV Aspect Select which screen aspect to use based on the shape of your TV screen. [4:3] 3 Select when a standard 4:3 TV is connected. System Setting 2. Use W/S to select the first setup option, and press D to move to the second level.
System Setting Resolution [Audio] Menu Sets the output resolution of the HDMI video signal. Refer to “Resolution Setting” for details about the resolution (page 15). Speaker Setup [Auto] If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. 21 Make the following settings for the built-in 2.2 channel surround speaker. 1. Select [Speaker Setup] on the [Audio] menu. 2.
System Setting [Speaker Test Start] / [Speaker Test Stop] Select [Speaker Test Start] by using the W/S and press ENTER ( ). Press ENTER ( ) again to stop. Adjust the volume to match the volume of test signals memorized in the system. DRC (Dynamic Range Control) 3 When a title encoded in Dolby Digital or Dolby Digital Plus is playing back, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones).
Operating 23 Basic operations Selecting the input source This section explains how to select the input source (i.e., the AV component that you want to listen to or watch). It is necessary to connect the equipment you want to enjoy such as DVD, Blu-ray disc player, USB etc. By using the knob on the unit 1. Press 1/! (STANDBY/ON) on the unit. 2. Select a source by using INPUT SELECTION on the unit. The selected source appears on the display window. By using the remote control 1.
Operating Adjusting the speaker levels Enjoying various sound mode You can adjust the level of each speaker. These settings are applied to all sound fields. You can adjust from -5 to +5 in 1 step. You can enjoy various sound mode. For details, refer to Setting the USER EQ, Sound effect and Bass Blast. 1. Press SPEAKER LEVEL on the remote control repeatedly to select a desired speaker to set. Setting the USER EQ The indicator changes cyclically in the display window as follows. SW -> FL -> FR 2.
Operating 25 , Note Sound effect This system has a number of preset sound effects. You can select a suitable sound effect. Press SOUND EFFECT on the remote control repeatedly until the desired sound effect appears on the display window. In some of surround modes, some speakers, there’s no sound or low sound. It depends on the mode of surround and the source of audio, it is not defective.
Operating Radio Operations Presetting the Radio Stations You can preset 50 stations for FM. Be sure that FM aerial is connected. Before tuning, make sure to turn down the volume. 1. Tune in to a radio station. Listening to FM radio 1. Press RADIO on the remote control or turn INPUT SELECTION on the unit until FM appears on the display window. The last received station is tuned in. 2. Automatically : Press and hold TUNING.
Operating 27 Playing the USB device This unit can play movie, music and photo files contained in the USB device. To stop playback MUSIC MOVIE PHOTO Press Z during playback. To pause playback MUSIC MOVIE Basic operation 1. Connect the USB device to the USB port until it fits into the port. Press M during playback. Press d to resume playback. To scan forward or backward MUSIC MOVIE Press c or v to play fast forward or fast reverse during playback.
Operating To slow down the playing speed MOVIE While the playback is paused, press v repeatedly to play various speeds of slow motion. Compatible USB Devices MP3 Player : Flash type MP3 player. USB Flash Drive : Devices that support USB 2.0 or USB 1.1. Some USB device may not work with this unit. Resume playback MUSIC MOVIE The unit records the point where you pressed the Z depending on the file. If “MZ” appears on the screen briefly, press d to resume playback (from the scene point).
Operating 29 Listening to music Playing your favorite music You can play music files contained in a USB device. It enables you to listen to music by marking your favorite files. 1. Select [Music] by using A/D on the [USB] menu. 2. Press ENTER( ). The music files start playing automatically. 1. During playback, select your favorite files by using W/S. 2. Press MARKER. The [ indicator appears on the [MUSIC] menu. 3. Repeat steps 1-2. Using the [Music] menu 4. Press d or ENTER( ).
Operating Playing repeatedly or randomly Playing a movie file During playback, press select a desired mode. You can play movie files contained in a USB device. Display REPEAT REPEAT repeatedly to 1. Select [Movie] using A/D on the [USB] menu. Description The current file will be played repeatedly. REPEAT ALL All the files will be played repeatedly. RANDOM The files will be played in random order. Off (No display) 2. Select a file using W/S/A/D, and press d or ENTER ( ) to play the file.
Operating 31 Playing from selected time Movie file requirement 1. Press INFO/DISPLAY ( ) during playback. The time search box shows the elapsed playing time. Movie file compatibility with this unit is limited as follows. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”. 3. Press ENTER ( selected time.
Operating Viewing a photo To stop a slide show You can view photo files contained in a USB device. Press Z during slide show. 1. Select [Photo] using A/D on the [USB] menu. The [PHOTO] menu appears. To pause a slide show Press M during slide show. Press d or M to re-start the slide show. To skip to the next/previous photo While viewing a photo in full screen, press A or D to go to the previous or next photo.
Operating 33 Photo file requirement Using the Sleep Timer Photo file compatibility with this unit is limited as follows : You can set the unit to turn off automatically at a specified time. Press SLEEP repeatedly. Max pixel in width : 2760 x 2048 pixel Maximum files : Under 999 The indicator changes cyclically in the display window as follows. Some files may not operate due to a different recording format or the condition of file.
Troubleshooting Troubleshooting PROBLEM No Power CAUSE & CORRECTION The power cord is unpluged. Plug in the power cord. Check the condition by operating other electronic devices. The speaker wires are disconnected. Check the speaker connections. The volume is set to minimum. Adjust the volume level. No sound Incorrect input source is selected. Check the input source and select the correct input source. The mute function is activated.
Appendix 35 Trademarks and licenses Maintenance Handling the unit When shipping the unit HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Appendix Specifications General Power requirements AC 200 - 240 V, 50 / 60 Hz Power consumption 70 W Dimensions (W x H x D) 430 x 144.5 x 330 mm Net Weight (Approx.) 4.2 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Bus Power Supply DC 5 V 0 500 mA Input/Output ANALOG AUDIO IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 2 ANALOG VIDEO IN 1.0 Vrms (p-p), 75 Ω, sync negative, RCA jack x 2 OPTICAL IN 3.
Appendix 37 Front speakers Type 2 Way 2 Speaker Impedance 4Ω Rated Input Power 185 W Max. Input Power 370 W Net Dimensions (WxHxD) 274 x 941 x 277 mm Net Weight(1EA) 13.8 kg Subwoofer Type 1 Way 1 Speaker Impedance 3Ω Rated Input Power 215 W Max. Input Power 430 W Net Dimensions (WxHxD) 273 x 390 x 364 mm Net Weight(1EA) 7.4 kg Designs and specifications are subject to change without prior notice. 6 Appendix NA7530D-FU.DZAFLLK_ENG_MFL67781455.indd NA7530D-FU.
NA7530D-FU.DZAFLLK_ENG_MFL67781455.indd NA7530D-FU.DZAFLLK ENG MFL67781455.
