Owner's Manual

Connecting 15
Connecting
2

HDMI is the abbreviated name for High
De nition Multimedia Interface. It is an
interface which transmits video and audio
signals in digital format. If a connected
HDMI device does not accept the audio
output of the unit, the HDMI device’s audio
sound may be distorted or may not output.

When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting”)

When you connect a HDMI or DVI
compatible device make sure of the
followings :
- Try switching o the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this unit.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 576i (or 480i), 720 x 576p (or 480p),
1280 x 720p, 1920 x 1080i or 1920 x 1080p
video input.

Not all HDCP-compatible HDMI or DVI
devices will work with this unit.

The picture will not be displayed properly
with non-HDCP device.

This unit does not playback and TV screen is
changed to black screen.

If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft).

Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn o the unit and then turn it
on again.

When the HDMI connection with HDCP
is not veri ed, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
,
Note
Resolution Setting
The unit provides several display resolutions
for HDMI OUT TO TV jack. You can change the
resolution by using [Setup] menu.
1. Press SETUP.
The [Setup] menu appears.
2. Use
W
/
S
to select [Display] option then press
D
to move to the second level.
3. Use
W
/
S
to select the [Resolution] option then
press
D
to move to the third level.
4. Use
W
/
S
to select the desired resolution then
press ENTER (
) to con rm your selection.
If your TV does not accept the resolution you
have to set on the unit, you can set resolution
to 576p (or 480p) as follows :
Press
Z
for more than 5 seconds.
,
Note
NA7530D-FU.DZAFLLK_ENG_MFL67781455.indd 15NA7530D-FU.DZAFLLK ENG MFL67781455.indd 15 2013-02-25 3:59:302013-02-25 3:59:30