Owner's Manual

28 Operation
Operation
4
Bass Blast
You can set the BASS BLAST sound mode
directly.
Press BASS BLAST repeatedly.
Display Description
BASS BLAST During playback, reinforces
the bass sound.
BYPASS You can enjoy the sound
without equalizer e ect.
Setting the USER EQ
You can listen to music with desired sound
e ect by adjusting the BASS, MIDDLE and
TREBLE.
1. Press USER EQ on the front panel.
“USER EQ” appears on the display window.
2. Press PLAY / PAUSE on the front panel
while the “USER EQ” is displayed in the
display window.
3. Select the BASS, MIDDLE or TREBLE by
pressing ENTER on the front panel.
4. Rotate MULTI CONTROL on the front panel
to set sound level.
5. Press PLAY / PAUSE on the front panel to
 nish the settings.
Listening to FM radio
You can listen to FM broadcast through the
built-in tuner. Before operation, make sure you
have connected the FM antenna to the unit.
(Page 20)
Automatic tuning
1. Rotate INPUT SELECTION to select tuner
(FM). Or press RADIO with the remote
control to select tuner (FM).
2. Press TUNING - or TUNING + for more than
2 seconds.
Press TUNING - for more than 2 seconds to
scan from high to low.
Press TUNING + for more than 2 seconds to
scan from low to high.
The unit stops scanning whenever a station
is received.
In case of poor FM stereo reception
If the FM stereo reception is poor and “ST.”
 ashes in the display window, select monaural
audio so that the sound will be less distorted
by pressing the MONO/STEREO.
The “ST.” indicator disappears in the display
window. There will be no stereo e ect, but the
reception will improve. Press the button again
to restore the stereo e ect.
Manual tuning
Press TUNING - or TUNING + brie y and
repeatedly on the FM mode to select a station
you want. Or rotate MULTI CONTROL on the
unit.
NA9530P-FH.DZAFLLK_ENG_MFL67781456.indd 28NA9530P-FH.DZAFLLK_ENG_MFL67781456.indd 28 2013-02-25 3:59:472013-02-25 3:59:47