User's Manual

11
ENGLISH
Cautions for Speech Recognition
• Voice recognition requires a Magic Lighting Remote, which may not be supported
by certain models.
• To use all speech recognition features, you need to set your regions, etc.
Otherwise, you cannot use some features.
• You must have a network connection to use the speech recognition feature.
• If you have a network connection, you need to accept the terms and conditions
to use speech recognition.
• To control the set top box connected to the projector with the voice recognition
feature, go to (Q. Settings) [Connection] [Device Connection
Settings] [Universal Control Settings] to set up a universal remote control.
• It is recommended to point the Magic Lighting Remote toward the set top box
after the voice input.
• The rate of speech recognition may vary depending on the characteristics
of the user (voice volume, pronunciation, accent, and talking speed) and the
surroundings (noise and projector volume).
• To achieve accurate recognition of your speech, you must pronounce words in a
slow and accurate manner at an appropriate voice volume at a distance of about
10 cm (3.9 inches) away from the Magic Lighting Remote’s microphone.
• If you speech is not recognized properly, speech recognition may operate
differently than you originally intended.