PTAC ACCESSORIES SPECIFICATION BOOK
TABLE OF CONTENTS Page No. Part Number Description PTAC WALL SLEEVES & ACESSORIES 3 AYFDSV01A Wall Sleeve, Steel SnapEase, Insulated, 42x16x13.75 - Soft Dove 4 AYSVB01A Wall Sleeve, Steel Assembled, Insulated, 42x16x13.
Submittal Data: AYFDSV01A Job Name Purchaser Submitted To PTAC Standard Metal Wall Sleeve Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Standard 42 x 16 x 13.75-in wall sleeve. - Lined with acoustical & thermal insulation. - Made of heavy duty Galvalume steel. - Powder coated paint for superior adhesion & protection. - Exterior weather barrier included for construction phase. - Key hole slots for easy rear grille mounting.
Submittal Data: AYSVB01A Job Name Purchaser Submitted To PTAC Standard Metal Wall Sleeve Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Standard 42 x 16 x 13.75-in wall sleeve. - Lined with acoustical & thermal insulation. - Made of heavy duty Galvalume steel. - Powder coated paint for superior adhesion & protection. - Exterior weather barrier included for construction phase. - Key hole slots for easy rear grille mounting.
Submittal Data: AYFPSV02A Job Name Purchaser Submitted To PTAC Standard Polymer Wall Sleeve Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Standard 42 x 16 x 13.9-in wall sleeve. - Noncorrosive fiberglass-reinforced polyester compound. - Stainless steel latches. - Lined with acoustical & thermal insulation. - Exterior weather barrier included for construction phase. - Key hole slots for easy rear grille mounting. - Rear drainage holes on right and left sides.
Submittal Data: AYSV018B Job Name Purchaser Submitted To PTAC 18-inch Extended Metal Wall Sleeve Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Extended 42 x 16 x 18-in wall sleeve. - Lined with acoustical & thermal insulation. - Made of heavy duty Galvalume steel. - Powder coated paint for superior adhesion & protection. - Exterior weather barrier included for construction phase. - Key hole slots for easy rear grille mounting.
Submittal Data: AYSV024B Job Name Purchaser Submitted To PTAC 24-inch Extended Metal Wall Sleeve Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Extended 42 x 16 x 24-in wall sleeve. - Lined with acoustical & thermal insulation. - Made of heavy duty Galvalume steel. - Powder coated paint for superior adhesion & protection. - Exterior weather barrier included for construction phase. - Key hole slots for easy rear grille mounting.
Submittal Data: AYSVKITB Job Name Purchaser Submitted To 2-inch Wall Sleeve Extender Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - 42 x 16 x 2-in wall sleeve extender. - Fits on front side of standard wall sleeve. - Lined with acoustical & thermal insulation. - Made of heavy duty Galvalume steel. - Powder coated paint for superior adhesion & protection. - Includes (2) condenser air baffle/gasket extenders.
Submittal Data: AYRGALA01 Job Name Purchaser Submitted To Stamped Aluminum Grille Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Strong and durable aluminum construction. - Clear anodized aluminum color. - 42 in. x 16 in. design. - Designed to be mounted easily from inside the room. - Right & left drain holes provided. - Factory installed foam condenser air baffle/gaskets.
Submittal Data: AYAGALA01A Job Name Purchaser Submitted To Architectural Aluminum Grille Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Decorative architectural style aluminum grille. - Clear anodized aluminum color. - 42 in. x 16 in. design. - Designed to be mounted easily from inside the room. - Right & left drain hole knockouts provided. - Condenser air baffle/gaskets with vertical air deflectors.
Submittal Data: AYAGALB01A Job Name Purchaser Submitted To Architectural Aluminum Grille Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Decorative architectural style aluminum grille. - Powder coat painted for superior adhesion & protection. - 42 in. x 16 in. design. - Designed to be mounted easily from inside the room. - Right & left drain hole knockouts provided. - Condenser air baffle/gaskets with vertical air deflectors.
Submittal Data: AYAGALC01A Job Name Purchaser Submitted To Architectural Aluminum Grille Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Decorative architectural style aluminum grille. - Powder coat painted for superior adhesion & protection. - 42 in. x 16 in. design. - Designed to be mounted easily from inside the room. - Right & left drain hole knockouts provided. - Condenser air baffle/gaskets with vertical air deflectors.
Submittal Data: AYAGPLB01 Job Name Purchaser Submitted To Architectural Polymer Grille Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Decorative 1-piece molded grille. - Colorfast, lightly textured finish. - 42 in. x 16 in. design. - Meets UL flammability rating of UL94-2V. - Right & left drain slots provided. - Condenser air baffle/gaskets with vertical air deflectors. - Contains UV protector.
Submittal Data: AYAGPLC01 Job Name Purchaser Submitted To Architectural Polymer Grille Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Decorative 1-piece molded grille. - Colorfast, lightly textured finish. - 42 in. x 16 in. design. - Meets UL flammability rating of UL94-2V. - Right & left drain slots provided. - Condenser air baffle/gaskets with vertical air deflectors. - Contains UV protector.
Submittal Data: AYAGPLD01 Job Name Purchaser Submitted To Architectural Polymer Grille Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Decorative 1-piece molded grille. - Colorfast, lightly textured finish. - 42 in. x 16 in. design. - Meets UL flammability rating of UL94-2V. - Right & left drain slots provided. - Condenser air baffle/gaskets with vertical air deflectors. - Contains UV protector.
Submittal Data: AYDR101B Job Name Purchaser Submitted To PTAC Condensate Drain Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Easily mounts to rear flange for an exterior drain system. - Includes a 3-inch straight and short 90-degree drain copper tube. - Mounts easily and securely to standard wall sleeve. - Configurable for internal wall drain system. - Corrosive resistant stainless steel screws. Shipping Dimensions Length Height Depth Weight Pallet Qty 6.
Submittal Data: AYSB1201B Job Name Purchaser Submitted To PTAC 208/230v 20A Electrical Subbase Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Contains a prewired NEMA receptacle outlet. - Multiple electrical knockouts for fast and easy installation. - Conceals excess unit power cord for a neat, finished appearance. - Adjustable height of 3¼ to 5½ inches from finished floor. - Made of heavy gauge steel. - Mounts easily and securely to standard wall sleeve.
Submittal Data: AYSB1301B Job Name Purchaser Submitted To PTAC 208/230v 30A Electrical Subbase Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Contains a prewired NEMA receptacle outlet. - Multiple electrical knockouts for fast and easy installation. - Conceals excess unit power cord for a neat, finished appearance. - Adjustable height of 3¼ to 5½ inches from finished floor. - Made of heavy gauge steel. - Mounts easily and securely to standard wall sleeve.
Submittal Data: AYSB2201B Job Name Purchaser Submitted To PTAC 265v 20A Electrical Subbase Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Contains a prewired NEMA receptacle outlet. - Multiple electrical knockouts for fast and easy installation. - Conceals unit power cord for a neat, finished appearance. - Adjustable height of 3¼ to 5½ inches from finished floor. - Steel chase-way between unit and subbase to hide power cord.
Submittal Data: AYSB220DS Job Name Purchaser Submitted To PTAC 265v 20A Electrical Subbase w/ Disconnect Switch Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Contains a prewired NEMA receptacle outlet and disconnect switch. - Multiple electrical knockouts for fast and easy installation. - Conceals unit power cord for a neat, finished appearance. - Adjustable height of 3¼ to 5½ inches from finished floor.
Submittal Data: AYSB6101 Job Name Purchaser Submitted To PTAC Non-Electrical Subbase Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Adjustable height of 3¼ to 5½ inches from finished floor. - Made of heavy gauge steel. - Mounts easily and securely to standard wall sleeve. - Decorative side skirting for finished appearance. - Field installed receptacle, disconnect switch and fuse kits available.
Submittal Data: AYDSW120B Job Name Purchaser Submitted To PTAC Subbase Switch 208/230v 20A Accessory Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Provides a physical power disconnect for a PTAC unit. - Rated for 208/230 & 265 volts up to 30 amps. - Includes a prewired power DPST switch. - Mounts quickly and easily in the subbase. - Cannot be used with Part No.
Submittal Data: AYDSW130B Job Name Purchaser Submitted To PTAC Subbase Switch 208/230v 30A Accessory Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Provides a physical power disconnect for a PTAC unit. - Rated for 208/230 & 265 volts up to 30 amps. - Includes a prewired power DPST switch. - Mounts quickly and easily in the subbase. - Cannot be used with Part No.
Submittal Data: AYDSW220B Job Name Purchaser Submitted To PTAC Subbase Switch 265v 20A Accessory Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Provides a physical power disconnect for a PTAC unit. - Rated for 208/230 & 265 volts up to 30 amps. - Includes a prewired power DPST switch. - Mounts quickly and easily in the subbase. - Cannot be used with Part No.
Submittal Data: AYLL101B Job Name Purchaser Submitted To PTAC Leveling Legs Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - Adjustable height of 3¼ to 5½ inches from finished floor. - Made of heavy gauge steel. - Mounts easily and securely to standard wall sleeve. - Two (2) legs per pack. Unit Dimensions Specifications Length Height Depth Weight Material: Steel Material Thickness*: 0.0433 to 0.0480-in Color: Black Finish: Powder coated paint 3.25-in 1.
Submittal Data: AYLD1A Job Name Purchaser Submitted To Lateral Duct Location Engineer Reference For Schedule No. Date Approval Construction GENERAL FEATURES - One unit to heat or cool two separate rooms. - Easily mounts to front of standard wall sleeve. - Lined with acoustical & thermal insulation. - 46-inch extension duct. - Adjustable room duct register. - Extension Duct may be directed to left or right side of the unit. Dimensions Plenum w/out Transition Extension Duct 44.0-in 46-in Length 3.
For more information visit www.lgptac.com Specifications are subject to change without notice. Manufacturer reserves the right to discontinue or modify specifications or designs without notice or without incurring obligations. All rights reserved. 03/2018 © LG Electronics U.S.A., Inc.