Owner's Manual

B2000 User Guide 15
3. Lay the battery cover in
place of the phone and
slide it until the latch
clicks.
4. Charging the Battery
To connect the travel adapter to the phone, you
must have installed the battery.
1. With the arrow facing
you as shown in the
diagram push the plug
on the battery adapter
into the socket on the
bottom of the phone until
it clicks into place.
2. Connect the other end of
the travel adapter to the
mains socket. Use only
the included packing
charger.
n Warning
Do not force the connector as this may damage the
phone and/or the travel adapter.
n Note
“Battery Charging” is displayed on the screen after
connecting the travel adapter. Only if the battery is
totally empty, Call indicator Light is on without displaying
“Battery Charging”.
5. Disconnecting the charger
Disconnect the travel
adapter from the phone by
pressing its side buttons as
shown in the diagram.
n Note
• Ensure the battery is fully charged before using the
phone.
• Do not remove your battery or the SIM card while
charging.
• The moving bars of battery icon will stop after charging
is complete.
n Note
If the battery does not charge,
• switch the phone off.
• ensure the battery is correctly fit.
B2000_RSA_eng.qxd 2005.6.29 4:21 PM Page 15