Owner's Manual

2. Input new Security code/PIN/PIN2 code and
verify them.
Network settings [Menu 4-5]
You can select a network which will be registered
either automatically or manually. Usually, the
network selection is set to Automatic.
Automatic [Menu 4-5-1]
If you select Automatic mode, the phone will
automatically search for and select a network for
you. Once you have selected “Automatic”, the
phone will be set to “Automatic” even though the
power is off and on.
Manual [Menu 4-5-2]
The phone will find the list of available networks
and show you them. Then you can select the
network which you want to use if this network has
a roaming agreement with your home network
operator. The phone let you select another
network if the phone fails to access the selected
network.
Preferred [Menu 4-5-3]
You can set a list of preferred networks and the
phone attempts to register with first, before
attempting to register to any other networks. This
list is set from the phone’s predefined list of
known networks.
GPRS setting [Menu 4-6]
You can set GPRS service depending on various
situation.
Power on [Menu 4-6-1]
If you select this menu, the phone is automatically
registered to a GPRS network when you switch
the phone on. Starting a WAP or PC dial-up
application created the connection between phone
and network and data transfer is possible. When
you end the application, GPRS connection is
ended but the registration to the GPRS network
remains.
When needed [Menu 4-6-2]
If you select this menu, the GPRS connection is
established when you connect a WAP service
and closed when you end the WAP connection.
B2000 User Guide 45
B2000_RSA_eng.qxd 2005.6.29 4:21 PM Page 45