Video Cassette Recorder OWNER'S MANUAL MODEL: BC493Y/BC450Y/BD470Y/ BD270Y/BC250Y R PAL Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely.
Position your VCR so that no sunlight falls directly onto it. Precautions&f Informatin bright light Just to or name a extraordinary few examples of the features: Care should be taken not to expose your VCR to any unnecessary vibration, moisture, dust or heat. electrical storms it is advisable to During the aerial cable and mains damage Do not plug to unplug both ? prevent accidental to your VCR and TV. ? operate your VCR if it is damaged.
Welcome to LG Thank you for buying this LG video cassette recorder Model BC493Y/BC450Y/BD470Y/ BD270Y/BC250Y.
Your video recorder (VCR) is designed so that almost all of its features can be controlled from the REMOTE CONTROL HANDSET. Some features can also be controlled from the FRONT PANEL of the video recorder. The maximum operating distance that you may control your video recorder is about 7.5 metres (25 feet). It must also be within an angle of 30 degrees either side of the REMOTE SENSOR on the front of your video recorder.
Each button on your VCR has the function same as its corresponding button on the remote control handset. MODEL MODEL BC493Y : 12 3456789 : Controls BC450Y/BC250Y 12 3456789 REC/ITR PROG. PROG. REC/ITR P/STILL OPR 11 12 10 MODEL 10 11 BD470Y/BD270Y : 123 4 5 PROG. 6 789 REC /ITR PAUSE/ 11 10 TV/VIDEO 13 1. Power 2. Stop 3. Cassette 4. VCR 5. Remote Control Sensor 12. OPR 6. REC/ITR 13. TV/VCR 7.
The Conecting guidance given on this page is the most common form of connection. However please check with your manufacturer's instruction books for specific information. Make sure all connections are made with both your VCR and additional appliance unplugged from the mains to avoid ToaTV damaging your equipment. Connecting a VCR using a SCART lead is optimum sound and picture quality from video-tape playback.
Your TV receives signals from the video recorder (VCR) like another TV station. You have to select a channel number on your TV and tune it in so that you may watch video tapes. If you connect be necessary, Make VCR that you have installed your described earlier sure correctly as in this book. Press POWER to turn a monitor or a TV set equipped with SCART socket this select the AV mode on your TV.
Tunig a Videochanl OnyourTV Make sure that you have correctly installed your VCR and successfully tuned in video channel a dedicated on your TV. If you do not tune in a dedicated video channel on your TV you will be unable to view and record video tapes! Only carry out stages 5~8ifyoucannot obtain clear video playback described in as 1 stages Select Press PROG. select another video your VCR for 4 seconds. channel. more CH60 will appear in the VCR display (BC493Y/BC450Y/ BC250Y).
This VCR The Turn on can easily menus are your TV set. be programmed by using the menus Press i. Press F or the desired Press POWER to turn your VCR. on displayed on screen. controlled from the REMOTE CONTROL HANDSET. The main appear on menu will the TV screen. G to select Press "i" to menu. menu. Press OK and press D usethmain the remove or E to select the sub menu.
Tunig n TVstaion Automaicly Make that you have installed your VCR and tuned a video The main channel on your TV as described earlier in this appear book. Press F sure Press i. Press OK to start the automatic correctly menu will the TV on The TV station table will appear when tuning screen. Press i to or G is tuning complete. process. save your settings. to select the ACMS. Switch your TV and select the channel you wish to watch videos. on Press POWER to turn Press OK.
In certain country broadcast signals may be too weak for your VCR's process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually in order for your VCR to store areas automatic of the tuning Manuly TVstaion Tunig n them. Press i. Press AV to select C The main on appear menu (Standard stations) (Cable stations): will the TV screen. C02 - C71, S01 TV/VCR 0 - S or Press G to select MFT. Press G to select Press D STATION or E to adjust.
Tunig n TVstaion Manuly Press OK to select it. Press D or E to select letters and numbers for the new station name. Press i, confirm the Your station placement. been tuned into your VCR. Press i again. PressForGtomove back and forth between characters.
After TV stations into your VCR you may wish to change the order in which they are having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. tuning stored without Press i. Press i. Press D the The main on appear Press F menu will the TV Press D screen. G to select or or E to select the programme number you want to move example, PR 03).
After TV stations into your VCR you may wish to delete a station. given on this page will show you how easily delete any unwanted TV tuning The instructions stations. Delting& Selcting TVStaions Press i. Press i. The main stored TV stations: Stored TV stations can be selected in either of two ways. PressDorEto select different stations that are tuned into your VCR. Selecting appear menu Press F will the TV on Press D screen.
You will eject video cassettes when your VCR is plugged into the mains. play back recordings from NTSC tapes (on PAL TV). Getting a better picture When a cassette is inserted and playback started, the automatic tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press or on the remote control to manually adjust the tracking until any distortions have been removed.
Picture search will Playing a tape and During playback Slow motion of Shuttle a only continue for about 3 minutes, after which your VCR will return to playback. During picture search, logic search, and CM Skip the sound is muted there will be some noise streaks on the picture. normal video sette you cas- playback, (BC493Y/BD470Y/BC450Y): can select picture sharpness by pressing OPR on the During playing back or still picture press F or front of your VCR You (BC493Y).
Your VCR is equipped with triple colour standard, you play can back a tape in PAL B/G and SECAM D/K. your VCR detects the colour system automatically. colour problem please select the colour system manually. During playback If there are Press i. Press OK. The main menu will the TV on appear Press D or Press i to to the menus COLOUR system used. screen. remove Setinghcolursym the from the TV screen.
The clock in your VCR controls time, Setinghclok Manuly Press i. Press F or day and date Use the numbered buttons on the remote control to alter or enter G to select settings for your VCR. If you make a mistake press F or G and enter the correct details. Press i. the HOURS, MINUTES, DAY, MONTH and TIME DATE. YEAR. Press OK. Please note your VCR 24 hour clock. uses a e.g. 1 pm will be displayed When as 13:00.
Your VCR allows you to make recordings using a variety of simple methods : Instant Timer Recording (ITR) start recording immediately for a set period of time video cassette Make VCR that you have installed your described earlier sure correctly as Insert with a video cassette protection tab into your VCR. Press to select or the programme number you wish to record. in this book.
Your VCR incorporates Long Play (LP) which enables you to record up to twice the amount video cassette. For example an E-180 will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a slight loss in picture and sound quality when using LP. of time InstaTimer Recording(ITR) on a Press LP if you wish to Press REC/ITR to start Press P/STILL to avoid record in recording. recording Standard Long Play Play.
ShowView greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering a ShowView Code. ShowView Codes are published in most guide magazines; they can vary one to nine numbers in length. Make sure that TV Press SHOWVIEW. Press D channels have been the tuned and stored in or E to select buttons to enter the recording type. ONCE: To record once. order.
SHOWVIEW is a registered trademark of Gemstar Development Corporation. System is manufactured under licence from Gemstar Development The SHOWVIEW Corporation. ( B C 4 9 3 Y ) ShowVie Progamin Press OK. settings that you wish to revise. (PR, DATE, TIME and SP). to record in PressDorEifyouwish Long Play. If you want to make another ShowView SP will produce improved picture and sound quali- 2-7. Press D ty, however LP will pro- Press i twice.
You may set up to seven timer record events within one month of the current date. PLEASE NOTE! before setting the timer make sure that you have set the VCR clock correctly and you know which channels you have tuned TV stations on your VCR. Make sure that TV Press i. Press OK channels have been Press F tuned and stored. G to select or setting again to start the timer record event. REC. Insert with a tab into OK Press OK.
If timer record events Make If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press D or E to select the event that you wish to delete or overlap... sure change. that the Press F to delete the event. Press OK to change; then press F or G to select Station, Date, Start and End times, and LP. Press D or E to enter the correct information.
Your VCR has an which if set will Energy Save feature place your VCR into an You may economic power save where the clock display will disappear. If you have programmed a recording, this feature mode of your VCR the Press POWER on the Press POWER VCR on the and your VCR will go into Energy again The VCR and clock will Save. appear on the video recorder's display All indicators will turn off (BC493Y/BC450Y/ BC250Y). display. or on the TV screen.
The TapeCountrMmyS Digital Tape Counter can be displayed on your TV screen instead of the time by pressing OK/CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape. ChildLock Press OK/CLK/CNT repeatedly until the counter is displayed Press STOP when on is VCR can can The Press PLAY or start recording. tape tape will rewind and automatically stop when the counter returns to 0:00:00.
Your VCR wide can record and play back wide format programme broadcast by the TV station. Switch screen your VCR. on Press D E repeatedly AUTO, 4:3 or or to select Press i. screen successfully : aspect ratio programmes (16:9). To record a type of wide screen signal must be Press i to remove the menus. To enjoy Wide-Screen playback you must connect your VCR to the 16:9. TV Press F G to select or 16:9 the correct i CLEAR 16:9/4:3. using a SCART cable.
Automatic Memory Power Shut-Off This feature of your VCR enables you to switch off your VCR automatically after tape rewind has been completed. Video Doctor (Self-Diagnosis) This feature informs you that there is a with your VCR. These error messages will appear on the TV problem screen. VAutomaicMeryPwSh-Of ideoDctr(Slf-agns) Press POWER tape rewind. during The tape will rewind to beginning and your VCR will automatically Switch on your VCR. PressDorEtochecka the problem. Press i.
(easy) power off Rewind Sequence of "Stop Eject Power Off is operated automatically by pressing ez POWER OFF. (easy) repeat By pressing & holding ez REPEAT during playing back, the holding section is replayed twice automatically. ez ez " During playing press ez back POWER OFF. Your VCR will be ed as the operat- following ; During playing back, press & hold ez REPEAT at the point where repeat play is to be concluded. Then, your VCR is started STOP search.
A second VCR (for tape copying) should be connected to the SCART socket on the back of your VCR. Remember to select the appropriate audio/video mode by pressing the AV button on the remote control. TapeCoying Specifatons General Power Power 110-240V~,50/60Hz.
Video Head Whenever Cleaning a video cassette is inserted into automatically cleaned.
P/N:3834RP0055C