OWNER’S MANUAL 3D Blu-ray™/ DVD Home Cinema System Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.
1 Getting Started Getting Started LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC. European Standards Centre: Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-(0)36-547-8888) yy Please note that this is NOT a Customer Service contact point. For Customer Service Information, see Warranty Card or contact the dealer that you purchased this product.
Getting Started 5 Important Notice for TV colour system The colour system of this player differs according to currently playing discs. Only the multi system colour TV can receive all signals output from the player. yy If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC. yy The multi system colour TV changes the colour system automatically according to input signals.
Table of Contents Table of Contents 1 Getting Started 2 8 8 12 12 12 12 13 14 15 Safety Information Introduction – Playable Discs and symbols used in this manual – About the “7” Symbol Display – Compatibility Notes – File compatibility – AVCHD (Advanced Video Codec High Definition) – About DLNA – Certain System Requirements – Regional Code – System Select (Optional) Remote control Front panel Rear panel 2 Connecting 16 16 16 17 17 18 18 19 20 20 20 21 22 22 23 25 25 Speaker Connection – Attachin
Table of Contents 46 46 47 47 48 48 – Improving poor FM reception – See information about a radio station Using the Premium Using the LG Apps – Signing in – Managing my Apps 5 Troubleshooting 49 49 50 51 51 51 51 Troubleshooting – General – Network – Picture – Sound – Customer Support – Open source software notice 6 Appendix 52 Controlling a TV with the Supplied Remote Control – Setting up the remote to control your TV Network Software Update – Network update notification – Software Update About Ne
Getting Started Introduction 1 Playable Discs and symbols used in this manual Getting Started Media/Term Logo Symbol e Description yy Discs such as movies that can be purchased or rented. yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. yy BD-R/RE discs that are recorded in BDAV format. Blu-Ray y u i r DVD-ROM yy BD-R/RE discs that contain Movie, Music or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format yy Discs such as movies that can be purchased or rented.
Getting Started ,,Note yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable. yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
Getting Started File compatibility Movie files 1 Getting Started File Location File Extension Codec Format Disc, USB “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, “.m4v” (DRM free), “.vob”, “.3gp” DIVX3.xx, DIVX4.xx, DIVX5.xx, DIVX6.xx (Standard playback only), XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3) Dolby Digital, DTS, MP3, WMA, AAC, AC3 SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.
Getting Started ,,Note yy The file name is limited to 180 characters. yy Maximum files/folder: Less than 2 000 (total number of files and folders) yy File compatibility may differ depending on the server. yy Because the compatibility on DLNA server are tested on the bundle DLNA server (Nero MediaHome 4 Essentials Windows edition) environment, file requirements and playback functions may differ depending on media servers.
1 Getting Started Getting Started About DLNA Regional Code This Player is a DLNA Certified digital media player that can display and play movie, photo and music content from your DLNA-compatible digital media server (PC and Consumer Electronics). This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.
Getting Started Remote control INFO/MENU • • • • • • a • • • • • • • • • • • • c • • • • • • FUNCTION: Changes input mode. SPEAKER LEVEL: Sets the sound level of desired speaker. SUBTITLE: Selects a subtitle language. FUNCTION 1 (POWER): Switches the player ON or OFF. INFO/MENU B (OPEN/CLOSE): Ejects a disc. SLEEP: Sets a certain period of time after which the unit will switch to off. INFO/MENU (m): Displays or exits On-Screen Display. HOME ( ): Displays or exits the [Home Menu].
Getting Started Front panel 2 1 1 Getting Started 3 4 a Disc tray b Display Window c PORT. IN d USB Port 1 3 4 5 5 e Operation buttons R (Open / Close) T (Play / Pause) I (Stop) F (Function) Changes the input source 2 or function.
Getting Started 15 Rear panel 1 Getting Started a AC power cord g LAN port b Speakers connectors h HDMI OUT TO TV c Cooling Fan i VIDEO OUT d OPTICAL IN e Antenna Connector f AUX (L/R) INPUT
Connecting 16 Speaker Connection Attaching the speakers to the player 2 1. Connect speaker wires to the player. Each speaker wire is color-coded. Use matching color wires for corresponding speakers. Connecting to Your TV Make one of the following connections, depending on the capabilities of your existing equipment.
Connecting HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High speed HDMI™ cable with Ethernet). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor. 17 ,,Note yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output. yy When you use HDMI connection, you can change the resolution for the HDMI output.
Connecting Video Connection Resolution Setting Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu. 1. Press HOME ( ). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. Rear of the unit 3.
Connecting ,,Note yy If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press B to open the disc tray. 19 Antenna connection Connect the supplied antenna for listening to the radio. 2 Press Z (STOP) for more than 5 seconds. yy When you set the resolution to 576i with HDMI connection, actual resolution is outputted to 576p. 2 yy If you select a resolution that your TV does not accept, the warning message will appear.
Connecting Connections with external device AUX Connection You can enjoy the sound from an external component through the speakers of this system. 2 Connecting Connect the analog audio output jacks of your component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing FUNCTION and ENTER (b). PORT. IN connection You can enjoy the sound from your portable audio player through the speakers of this system.
Connecting 21 OPTICAL IN connection You can enjoy the sound from your component with a digital optical connection through the speakers of this system. Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing FUNCTION and ENTER (b). Or press OPTICAL to select directly. You can also use the F (Function) button on the front panel to select the input mode.
Connecting Connecting to your Home Network 2 This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-LIVE interactivity and on-line content services.
Connecting 23 Wired Network Setup Advanced Setting If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b). 1.
Connecting Notes on Network Connection: yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
Connecting 25 USB device connection This player can play movie, music and photo files contained in the USB device. Playback content in the USB device 1. Insert a USB device to the USB port until it fits into place. ,,Note yy This player supports USB flash drive/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live and Audio CD recording, only FAT16 and FAT32 formats are supported.
System Setting Settings 4. Select [Next] and press ENTER (b). 5. Check all the settings that you have set in the previous steps. Initial Setup When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language, network settings and speaker setup on the initial setup wizard. 1. Press 1 (POWER). The initial setup wizard appears on the screen. 2. Use W/S/A/D to select a display language and press ENTER (b). 3 System Setting 3.
System Setting 27 Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 4. Use W/S to select a second setup option, and press ENTER (b) to move to the third level. 1. Press HOME ( ). 5. Use W/S to select a desired setting, and press ENTER (b) to confirm your selection. 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3 System Setting 3. Use W/S to select the first setup option, and press D to move to the second level.
System Setting [DISPLAY] Menu Resolution TV Aspect Ratio Sets the output resolution of the HDMI video signal. Refer to page 18 for details about the resolution setting. Select a TV aspect ratio option according to your TV type. 3 [Auto] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.
System Setting 29 HDMI Color Setting [LANGUAGE] Menu Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. Display Menu [YCbCr] Select when connecting to a HDMI display device. [RGB] Select when connecting to a DVI display device. 3D Mode [Off] Blu-ray 3D disc playback will output as 2D mode like a normal BD-ROM disc playback. [On] Blu-ray 3D disc playback will output as 3D mode. Wallpaper Changes the background of the initial screen.
System Setting [AUDIO] Menu Speaker Setup Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level.
System Setting 31 HD AV Sync Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use W S to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms. DRC (Dynamic Range Control) This function allows you to listen to a movie at a lower volume without losing clarity of sound.
System Setting [LOCK] Menu DVD Rating The [LOCK] settings affect only BD-ROM and DVD playback. Blocks playback of rated DVD based on their content. (Not all discs are rated.) To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password. Password You can create or change the password.
System Setting 33 [NETWORK] Menu The [NETWORK] settings are needed to use the software update, BD Live and on-line content services. Connection Setting If your home network environment is ready to connect the player, the player needs to be set the wired for network communication. (See “Connecting to your Home Network” on page 22.) Connection Status BD-LIVE connection You can restrict Internet access when BD-LIVE functions are used. [Permitted] Internet access is permitted for all BD-LIVE contents.
System Setting Network Play Auto Power Off This function allows you to control the playback of media streamed from DLNA media server by a DLNA certified smartphone. Most DLNA certified smartphone has a function to control the playback media on your home network. Set this option to [On] for allowing your smartphone to control this unit. Refer to instructions of your DLNA certified smartphone or the application for more detailed information.
System Setting 35 Sound Effect Setting the [User EQ] You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects. [Natural]: You can enjoy comfortable and natural sound. [Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded.
Operating General Playback Playing a Disc erot Using [HOME] menu 1. Press B (OPEN/CLOSE), and place a disc on the disc tray. The home menu appears when you press HOME ( ). Use W/S/A/D to select a category and press ENTER (b). 2. Press B (OPEN/CLOSE) to close the disc tray. For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 3. Press HOME ( ). 4. Select [Movie] or [Music] using A/D, and press ENTER (b). 5.
Operating 37 Playing Blu-ray 3D disc e Enjoying BD-Live™ e This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes. BD-ROM supporting BD-Live that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet. Preparation In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to: yy Check your TV is 3D capable and has HDMI input(s).
Operating Playing a file on a network server yui Basic operations for video and audio content This player can play video, audio and photo files located in a DLNA server through your home network. Press Z (STOP) while playback. 1. Check the network connection and settings (page 22). 2. Press HOME ( ). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select a DLNA media server on the list using W/S, and press ENTER (b).
Operating 39 Basic operations for photo content To play a slide show Press d (PLAY) to start slide show. To stop a slide show Press Z (STOP) while slide show. To pause a slide show Press M (PAUSE) while slide show. Press d (PLAY) to re-start the slide show. To skip to the next/previous photo While viewing a photo in full screen, press A or D to go to the previous or next photo. The unit records the point where you pressed the Z (STOP) depending on the disc.
Operating Advanced Playback Repeating a specific portion eroty Repeat Playback erotu y This player can repeat a portion you have selected. During playback, press REPEAT (h) repeatedly to select a desired repeat mode. Blu-ray Disc / DVD / Movie files jA- – Selected portion will be repeated continually. jChapter – The current chapter will be played back repeatedly. jTitle – The current title will be played back repeatedly. jAll – All the tracks or files will be played back repeatedly.
Operating 41 Changing content list view yui Selecting a subtitle file y On the [Movie], [Music] or [Photo] menu, you can change the content list view. If the subtitle file name is different from the movie file name, you need to select the subtitle file on the [Movie] menu before playing the movie. Method 1 Press red (R) colored button repeatedly. 1. Use W/S/A/D to select the subtitle file you wish to play in the [Movie] menu. 2. Press ENTER (b).
Operating Options while viewing a photo i You can use various options during viewing a photo in full screen. 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2. Select an option using W/S. Listening to music while slide show i You can display photo files while listening to music files. 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2.
Operating 43 On-Screen display 2. Select an option using W/S. You can display and adjust various information and settings about the content. 4. Press BACK (1) to exit the On-Screen display. Displaying content information on-screen eroy 1. While playback, press INFO/MENU (m) to show various playback information. 3. Use A/D to adjust the selected option value. ,,Note yy If no button is pressed for a few seconds, the on-screen display disappears. yy A title number cannot be selected on some discs.
Operating Playing from selected time eroy Hearing a different audio eroy 1. Press INFO/MENU (m) during playback. The time search box shows the elapsed playing time. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”. Press A/D to skip the playback 60 seconds forward or backward.
Operating 45 Changing the TV Aspect Ratio eoy Changing the Picture Mode eroy You can change the TV aspect ratio setting while playback. You can change the [Picture mode] option while playback. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Use W/S to select the [TV Aspect Ratio] option. 2. Use W/S to select the [Picture Mode] option. 3. Use A/D to select desired option. 4.
Operating Radio Operations Be sure that the antennas are connected. (Refer to the page 19) Listening to the radio 1. Press FUNCTION until TUNER (FM) appears in the display window. The last received station is tuned in. 4 Deleting a saved station 1. Press PRESET (- / +) to select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3. Press CLEAR again, to delete the selected preset number. Deleting all the saved stations 2.
Operating 47 Using the Premium Using the LG Apps You can use various content services via Internet with the Premium feature. You can use the LG application services on this player via Internet. You can easily find and download various applications from LG App store. 1. Check the network connection and settings (page 22). 2. Press HOME ( ). 3. Select the [Premium] using A/D, and press ENTER (b). Depending on the region, the LG Apps service may not be available at the moment.
Operating Signing in Managing my Apps To use the [LG Apps] feature, you need to sign in with your account. You can move or delete an installed application in the [My Apps] menu. 1. On the [LG Apps] or [My Apps] screen, press red (R) colored button. Move an application 2. Fill the [ID] and [Password] field using the virtual keyboard. 1. Select an application, and press green (G) colored button to display the options. If you do not have an account, press red (R) colored button to register. 3.
Troubleshooting 49 Troubleshooting General Symptom Cause & Solution The Power does not turned on. yy Plug the power cord into the wall outlet securely. The unit does not start playback. yy Insert a playable disc. (Check the disc type, color system, and regional code.) yy Insert the disc with the playback side down. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed. yy Multi-angles are not recorded on the DVD Video being played.
Troubleshooting Network Symptom Cause & Solution BD-Live feature does not work. yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet (see page 22). yy Your broadband speed may not fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Troubleshooting 51 Picture Symptom Cause & Solution There is no picture. yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts.
Appendix Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. 6 Setting up the remote to control your TV You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below).
Appendix 53 Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Option 1: 1. The update menu will appear on the screen when you turn off the player. 2.
Appendix 4. If newer version exists, the message “Do you want to download it?” appears. 5. Select [OK] to start update. (Selecting [Cancel] will end the update.) 6. The player starts downloading the newest update from the server. (Downloading will takes several minutes depending on your home network condition) 7. When downloading is completed, the message, “Download is complete. Do you want to update?” appears. 8. Select [OK] to start updating.
Appendix 55 About Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is a software for sharing movie, music and photo files stored on your computer to this player as a DLNA-compatiable digital media server. ,,Note yy The Nero MediaHome 4 Essentials CDROM is designed for PCs and should not be inserted in this player or in any product other than a PC. yy The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for sharing files and folders to this player.
Appendix Installing Nero MediaHome 4 Essentials Windows Start up your computer, and insert the supplied CDROM disc into your computer’s CD-ROM drive. An installation wizard will walk you through the quick and uncomplicated installation process. To install Nero MediaHome 4 Essentials, proceed as follows: 1. Close all Microsoft Windows programs and exit any anti-virus software that may be running. 2. Insert the supplied CD-ROM disc into your computer’s CD-ROM drive. 3. Click [Nero MediaHome 4 Essentials].
Appendix 57 Area Code List Choose an area code from this list.
Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 59 Trademarks and Licenses Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. Java is a trademark of Oracle and/or its affiliates. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license under U.S.
Appendix Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.
Appendix 61 Audio Output Specifications Jack/Setting Source Dolby Digital HDMI OUT PCM Stereo PCM Multi-Ch DTS Re-encode *3 BitStream *1 *2 PCM 2ch PCM 2.1ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2.1ch DTS Dolby Digital Plus Dolby TrueHD PCM 2ch PCM 2.1ch DTS Dolby TrueHD DTS PCM 2ch PCM 2.1ch DTS DTS DTS-HD PCM 2ch PCM 2.1ch DTS DTS-HD Linear PCM 2ch PCM 2ch PCM 2ch DTS Linear PCM 2ch Linear PCM 2.1ch PCM 2ch PCM 2.1ch DTS Linear PCM 2.1ch Linear PCM 7.
Appendix Specifications General Power requirements Refer to main label on the side panel. Power consumption Refer to main label on the side panel. Dimensions (W x H x D) Approx. 360 X 6.05 X 297 mm Net Weight (Approx.) 2.7 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs/Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector) x 1 ANALOG AUDIO IN 2.
Appendix 63 System Laser Semiconductor laser Wavelength 405 nm / 650 nm Signal system Standard PAL/NTSC color TV system Frequency response 20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling) Harmonic distortion Less than 0.05 % Dynamic range More than 80 dB LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX Bus Power Supply (USB) DC 5 V 0 500 mA Speakers (BH6220C) Front speaker (Left/ Right) Type 1 Way 1 Speaker Max.
Appendix Maintenance Notes on Discs Handling Discs Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.
Appendix 65 Important Information Relating to Network Services All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it ori
