Video Cassette with Line Player Recording OWNER'S MANUAL MODEL : BL-200K PAL NTSC Before connecting, operating, please read this instruction booklet or adjusting this product, carefully and completely.
Position your VCP so that no sunlight falls directly onto it. F e a t u r e s Precautions, Contes& Do not 2 Controls & Sockets 3 TV 4 moisture, dust Tuning or heat. electrical storms it is advisable to damage plug to prevent Your VCP should not be service in repaired by personnel. Never remove the back cover of your VCP as this can expose you to very high voltage and other hazards. If your VCP does not operate properly, please check the Troubleshooting Guide on page 15.
Each button on your VCP has the corresponding button control. (see page 6.) as its Power Stop (On/Off) & same on function the remote Tape Eject Cassette Rewind Compartment Play Fast Forward POWER STOP/ EJECT FF REW PLAY REC SYSTEM OPR POWER CST.IN PLAY REC LP/EP STANDBY P/STILL System Selector (see page 7.) Mains Lead (AC 100-240V, 50/60 Hz) OPR (see page 9.
The ToaTV Conecting on this page is the most common form of connection. However please check with your manufacturer's instruction books for specific information. Make sure all connections are made with both your VCP and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting a guidance given VCP using Audio/Video cable is one of the best ways to achieve optimum sound and picture quality from video-tape playback.
Your TV receives signals You have to select from the video a player (VCP) channel number like another TV station. your TV and tune it in so that you may watch video tapes. TV set equipped with AUDIO and VIDEO sockets this adjustment will not on If you connect a monitor or a be necessary, simply select the AV mode 1 on your TV. Make 2 that you have installed your described earlier in sure Insert a video pre-recorded correctly tape into your VCP and VCP press PLAY. as 4 3 this book.
Your video player (VCP) is designed so that almost all of its features CONTROL HANDSET. Some features operating distance that you may control your video player is about within an angle of 30 degrees either side of the REMOTE SENSOR 7.5 metres must also be on STOP/ EJECT PLAY OPR POWER CST.IN PLAY REC LP/EP STANDBY P/STILL POWER switches the VCP stand-by or on to on To EJECT from Eject P/STILL a still TRK P/STILL DISPLAY MENU Select the desired items the MENU batteries.
On Screen Display gives you information about the tape counter and operational mode of your VCP. Some functions of this video player can be set and altered on the TV screen using the remote control with On Screen Display OnScren Display. MENU OSD FUNCTION OSD Press MENU / i to Switches the function OSD ON the main Press F desired display menu. or G to select the menu. To improve the If you want to press F or G to select the sub menu. Dr.
This VCP is How to designed to play back and record cassettes systems. You will only be able Getting When playbcktpe a better to load and eject using PAL, MESECAM, and NTSC video cassettes when your VCP is (3.58 or 4.43) colour plugged into the mains. picture playback started, the automatic tracking function works to get the best possible picture automatically. "AUTO TRACKING" will appear on the TV screen while it is doing this.
Video Head Whenever Cleaning ejected from your VCP the video head is automatically cleaning should not be necessary. However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. a video cassette is inserted into cleaned. This should 4 mean 5 STILL Press P/STILL to still Visual search Press either FF a picture.
Other PlaybckFeturs 1 2 Press F Repeat playback If you want to play back tape repeatedly, set REPEAT to ON. 3 a G to select or Press DISPLAY / OK. Press MENU / i. Press F ON or G to switch or from TV MENU OK i search tape to the beginning and repeats playback continuously. to watch a remove screen. If you want to release this function, set REPEAT to reverse 10 OPR AUDIO REPEAT VCR AB C Dr.
VIDEO DOCTOR (Self-Diagnosis) This feature informs you that there is a problem with your VCP. These error messages will appear on the TV screen. 2 1 Press MENU / i. PressForGtochecka problem. Press F or G to select Dr. HEAD STATUS Press DISPLAY / OK. OOK O PLEASE CLEAN : Clean your video heads. TAPE STATUS O RECORDABLE O NOT RECORDABLE : Insert a tape with its protection tab in place. Press MENU / i to menus P/STILL OK DISPLAY MENU OK i from TV remove screen.
Your VCP allows you to make How to record 1 recordings connecting to TV a 2 Connect your VCP to as shown below. a TV equipped with AUDIO and VIDEO sockets. 3 Press POWER to turn on your VCP. Insert 4 a video cassette with the record protection tab Set the desired recording speed by pressing SPEED. into your VCP. Your external aerial must be in your TV.
5 7 6 Press REC to start Press P/STILL to avoid unwanted recording. recording scenes. During recording of TV programme you do not change the TV channel number on your TV. REC the Press STOP to end recording. indicator flashes in window. display PLAY REW Press P/STILL continue again recording. Tapes be can paused STOP REC for up to minutes; PAUSE will be displayed when a tape is Press EJECT. The 5 paused.
Make T a p e s Dub ing all connections sure damaging your 1 are made with both your VCP's and Television 2 Connect your VCP to another VCP as shown Press POWER to turn on Insert a blank video your VCP. tape with the record Insert protection tab into (recording) VCP. a source Aerial pre-recorded VIDEO Press STOP / EJECT to stop recording. your tape into another (playing) VCP. Simultaneously begin playback on another VCP and record AUDIO from the mains to avoid 4 3 below.
Check the following No picture ? Is the mains ? Is the TV switched ? ? & no before for service. calling Power ..................................AC 100-240V, 50/60Hz Power consumption.............Approx. 13 Watts sound plug plugged Have you tuned in watch video tapes on a in and switched on ? ? format .........................Tape Width 12.7 mm (0.5 inch) (W x H x D) .....360 x 94 x 270 mm Weight .................................Approx. 3.4 Kg. Operating temperature ........
P/N: 3834RP0035X