Owner’s Manual
Table Of Contents
- 1 Getting Started
- 2 Connecting
- 3 System Setting
- Initial Setup
- Settings
- Home Menu Display
- Playing the Linked Devices
- General Playback
- On-Screen Display
- Advanced Playback
- Repeat playback
- Repeating a specific portion
- Playing from selected time
- Selecting a subtitle language
- Hearing a different audio
- Watching from a different angle
- Changing the TV Aspect Ratio
- Changing subtitle Code Page
- Changing the Picture Mode
- Viewing content information
- Changing content list view
- Selecting a subtitle file
- Listening to music during slide show
- Audio CD recording
- 5 Troubleshooting
- 6 Appendix
Operating32
Operating
4
Changing subtitle Code Page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
le properly.
1. During playback, press INFO/MENU (
m
).
2. Select [Option] using
a/d
, and press ENTER
(
b
)
3. Use
w/s
to select the [Code Page] option.
4. Use
a/d
to select desired code option.
5. Press BACK (
1
) to exit the On-Screen display.
Changing the Picture Mode
eroy
You can change the [Picture mode] option during
playback.
1. During playback, press INFO/MENU (
m
).
2. Select [Option] using
a/d
, and press ENTER
(
b
)
3. Use
w/s
to select the [Picture Mode] option.
4. Use
a/d
to select desired option.
5. Press BACK (
1
) to exit the On-Screen display.
Setting the [User setting] option
1. During playback, press INFO/MENU (
m
).
2. Select [Option] using
a/d
, and press ENTER
(
b
)
3. Use
w/s
to select the [Picture Mode] option.
4. Use
a/d
to select the [User setting] option,
and press ENTER (
b
).
5. Use
w/s/a/d
to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (
b
) to
reset the all video adjustments.
6. Use
w/s/a/d
to select the [Close] option,
and press ENTER (
b
) to nish setting.