Colour Television OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Service Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer.
Location and function of controls All the functions can be controlled with the remote control. Some functions can also be adjusted with the buttons on the front panel of the set. 1 Remote control handset 2 1 2 3 TV/AV 4 5 6 ARC 7 8 9 PSM 3 0 SSM/ 4 PR 5 VOL OK TEXT MENU VOL SLEEP PR 6 PR.LIST 7 10 Before you use the remote control handset, please install the batteries. 11 1. POWER switches the set on from standby or off to 12 standby. 13 2. MUTE switches the sound on or off.
Location and function of controls Front panel Shown is a simplified representation of front panel. Here shown may be somewhat different from your set. POWER v r y MENU 18 19 20 6 OK ¢‚VOL¢” ¡ PR¡ª VIDEO AUDIO – AV2 14 21 22 18. MAIN POWER switches the set on or off. 19. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on. 20. REMOTE CONTROL SENSOR 21.
On screen menus The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Menu selection 1. Repeatedly press the MENU button to display each menu. 2. Press the ¡ª/¡ button to select a menu item. The selected menu item changes from green to purple. 3. Press the ¢‚/¢” button to change the setting of a menu item or OK button to display the sub menu. Note : a. In the AV mode, the Station menu is not displayed. b.
Setting up TV stations Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the ¡ª/¡ or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1. Repeatedly press the MENU button to select the Station menu. 2.
Setting up TV stations Assigning a station name 1. Repeat the Manual programme tuning steps 1 to 3. 2. Press the ¡ª/¡ button to select Name. 3. Press the ¢” button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the ¢‚button you can select in the opposite direction. 4. Select the next position by pressing the OK button and then take your choice of the second character, and so on. 5. Repeat the ‘Manual programme tuning’ steps 6 to 7.
Setting up TV stations Programme edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. Repeatedly press the MENU button to select the Station menu. 2. Press the ¡ª/¡ button to select Programme edit. 3. Press the OK button to display the Programme edit menu. Deleting a programme 1. Select a programme to be deleted with the ¡ª/¡ or ¢‚/¢”button. 2.
Picture adjustment Picture adjustment You can adjust picture contrast, brightness, colour intensity and sharpness to the levels you prefer. 1. 2. 3. 4. Repeatedly press the MENU button to select the Picture menu. Press the ¡ª/¡ button to select the desired picture item. Press the ¢‚/¢”button to make appropriate adjustments. Press the OK button to store it for the picture User. To recall your preferred setting, press the PSM button until the desired picture (Dynamic, Mild, Standard or User) appears.
Other functions Child lock The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized viewing. 1. 2. 3. 4. Repeatedly press the MENU button to select the Special menu. Press the ¡ª/¡ button to select Child lock. Press the ¢‚/¢” button on the remote control handset to select On. Press the TV/AV button to return to normal TV viewing.
Teletext (option) Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices and many other topics. Switch on/off Press the TEXT button to switch to teletext. The initial page or last selected page appears on the screen.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brightness Adj
