Operation Manual

Setting up TV stations
Up to 100 TV stations can be stored in this set by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the ¡ª/¡ or NUMBER
buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme tuning
All stations that can be received are stored by this method. It is recommended that
you use auto programme during installation of this set.
1. Repeatedly press the MENU button to select the Station menu.
2. Press the ¡ª/¡ button to select Auto programme.
3. Press the OK button to display the Auto programme menu.
Option :
In some models, the display System L or DK (BG or I) appears.
In that case, press the ¡ª/¡ button to select System then select your local TV
system with the ¢‚/¢” button.
L : SECAM L/L’(France)
DK : PAL D/K, SECAM D/K (East Europe)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K./Ireland)
4. Press the ¡ª/¡ button to select Storage from.
5. Select the beginning programme number with the ¢‚/¢” button or NUMBER
buttons. Any number under 10 is entered with a numeric ‘0’ in front of it, i.e. ‘05’
for 5.
6. Press the ¡ª/¡ button to select Start.
7. Press the OK button to begin auto programming.
All receivable stations are stored. The station name is stored for stations which
broadcast VPS (Video Programme Service), PDC (Programme Delivery
Control) or TELETEXT data. If no station name can be assigned to a station,
the channel number is assigned and stored as C (V/UHF 01-69) or S (Cable
01-47), followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit menu appears
on the screen. See the ‘Programme edit’ section to edit the stored programme.
8. Press the TV/AV button to return to normal TV viewing.
Manual programme tuning
Manual programme lets you manually tune and arrange the stations in whatever
order you desire. Also you can assign a station name with five characters to each
programme number.
1. Repeatedly press the MENU button to select the Station menu.
2. Press the ¡ª/¡ button to select Manual programme.
3. Press the OK button to display the Manual programme menu.
Option :
In some models, the display System L or DK (BG or I) appears.
In that case, press the ¡ª/¡ button to select System then select your local TV
system with the ¢‚/¢” button.
L : SECAM L/L’(France)
DK : PAL D/K, SECAM D/K (East Europe)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K./Ireland)
4. Press the ¡ª/¡ button to select Channel. Press the ¢‚/¢” button to select
V/UHF or Cable as required.
5. Press the ¡ª/¡ button to select Search. Press the ¢‚/¢” button to commence
searching. If a station is found the search will stop.
6. If this station is the one required, press the ¡ª/¡ button to select Storage.
Select the desired programme number with the ¢‚/¢” button or NUMBER
buttons. Any number under 10 is entered with a numeric ‘0’ in front of it, i.e.
‘05’ for 5.
7. Press the OK button to store it. The display Stored will appear.
8. To store another station, repeat steps 4 to 7.
Note : If programmed station has poor quality sound, select the system again in
the Manual programme menu.