Operation Manual

Setting up TV stations
Assigning a station name
1. Repeat the Manual programme tuning steps 1 to 3.
2. Press the ¡ª/¡ button to select Name.
3. Press the ¢” button. You can use a blank, +, -, the numeric 0 to 9 and the
alphabet A to Z.
With the ¢‚ button you can select in the opposite direction.
4. Select the next position by pressing the OK button and then take your choice
of the second character, and so on.
5. Repeat the ‘Manual programme tuning’ steps 6 to 7.
Auto AV setting
If your VCR outputs switching voltage when it is switched to playback, select Auto
AV On
with the VCR connected to the Euro scart socket. The set is automatically
switched to AV mode when an AV signal is input. But if you want to keep on
watching TV mode, set Auto AV to Off.
1. Repeat the ‘Manual programme tuning’ steps 1 to 3.
2. Press the ¡ª/¡ button to select Auto AV.
3. Press the ¢‚/¢” button to select On or Off.
4. Repeat the ‘Manual programme tuning’ steps 6 to 7.
Press the TV/AV button to return to normal TV viewing.
Fine tuning
Normally fine tuning is only necessary if reception is poor.
1. Repeat the ‘Manual programme tuning’ steps 1 to 3.
2. Press the ¡ª/¡ button to select Fine.
3. Press the ¢‚/¢” button to fine tune for the best picture and sound.
4. Repeat the ‘Manual programme tuning’ steps 6 to 7.
5. Press the TV/AV button to return to normal TV viewing.
The finely tuned programme will be indicated by yellow number during
programme selection.
Calling the programme table
You can check the programmes stored in the memory by displaying the
programme table.
Displaying programme table
Press the PR. LIST button to display the Programme table.
Note :
a. You may find some blue programmes. They are skipped during auto
programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme table
indicate there is no station name assigned.
Selecting a programme in the programme table
Select a programme with the ¡ª/¡ or ¢‚/¢” button.
Then press the OK button.
The set switches to the chosen programme number.
Paging through a programme table
There are 10 programme table pages in which contain 100 programmes.
Pressing the ¡ª/¡ or ¢‚/¢” button repeatedly turns the pages.
Press the TV/AV button to return to normal TV viewing.