Owner's Manual

A12
Troubleshooting
Check the
following
before
calling
for service.
SELF DIAGNOSTICS
message.
The
signal
cable is not
connected,
or is loose. Check and secure the connection.
OUT OF FREQUENCY
message appears.
The
frequency
of the
signal
from the video card is outside the
operating range
of
the monitor.
*
Horizontal
Frequency
:
30-61kHz
*
Vertical
Frequency
:
50-120Hz
Use the
graphics
board's
utility
software to
change
the
frequency setting
(Refer
to the manual for
graphics
board).
The
power
LED
is illuminated amber.
Display power management
mode.
There is no active
signal coming
from the PC.
The
signal
cable is not fastened
securely.
Check the
computer power
and
graphics adapter configuration.
The
image
on the SCREEN is not
centered,
or too
small,
or not a
rectangle shape.
Image adjustment
not been done
yet
in
the current
operating
mode. Use the
MENU,
SELECT and buttons to set the
image
to
your liking.
The monitor doesn't enter the
power saving
off mode
(Amber).
Computer
video
signal
is not VESA DPMS standard. Either the PC or the video
controller card is not
using
the VESA DPMS
power management
function.
An
abnormal
picture
is
displayed
on the screen. For
example,
the
upper part
of the
picture may
be
missing
or dark.
If
using
certain non-VESA Standard video
card,
an abnormal
picture may
be
displayed. Try setting
it to one of the
factory preset
modes,
or
selecting
to a
resolution and refresh rate within the
specification
limits of the monitor.
NOTE
If the
power
indicator(LED)
light
is
blinking
amber,
may
result in abnomal condition of
the monitor.
Then
press
a
power
ON/OFF
button on the front
panel
control and call
your
service
technician for more information.