Owner’s Manual

16 MAINTENANCE
MAINTENANCE
Care and Cleaning
Make sure that the electrical power is off and all
surfaces are cool before cleaning any part of the
cooktop.
Burner Assemblies
Sealed Burner Assemblies
Turn all controls OFF before removing the burner
parts.
The burner grates
a, the burner caps b, and the
burner heads
c can be lifted off, making them
easy to clean.
The burner electrodes
d are not removable.
Dual Extra Large Burner Assembly
The burner head c, the dual burner outer cap b
and the dual burner inner cap
a can be lifted off,
making it easy to clean.
The burner electrode
d is not removable.
CAUTION
• DO NOT remove any parts from the cooktop
until they have completely cooled and are safe to
handle. Do not operate the surface burners
unless all burner parts and grates are properly
assembled.
The electrode of the burner is exposed when the
burner head and cap are removed. When one
burner is turned to LITE, only that burner sparks.
Do not attempt to disassemble or clean around
any burner while another burner is on. An electric
shock may result, which could cause you to knock
over hot cookware.
Burner Caps and Heads
Burner Caps
Lift burner caps off when they are cool.
Wash burner caps in hot, soapy water and rinse
with clean water. You may scour with a plastic
scouring pad to remove burned-on food particles.
To assemble the dual extra large burner outer cap
properly, make sure that the burner cap
a is
positioned over the assembly guide
b in the
burner head.
General burner
Burner cap is properly
seated.
Burner cap is NOT
properly seated.
Dual Extra Large Burner
outer cap