Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Installing the Cooktop
- Electrical Connections
- Important Safety Instructions
- Providing the Electrical Connection
- Electrical Requirements
- Electrical Connection
- Where Local Codes Permit Connecting the Appliance-Grounding Conductor to the Neutral (White) Wire
- If Cooktop is Used in a New Branch Circuit Installation (1996 NEC), Mobile Home, Recreational Vehicle, or where Local Codes Do Not Permit Grounding to the Neutral (White) Wire
- Installing the Cooktop Unit
- Final Check
- Electrical Connections
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
22 OPERATION
5 If you select RESET, you will have to re-enter
the Wi-Fi password.
Brightness
Adjust the brightness of the LCD display from 20 %
to 100 % in increments of 20 %.
Setting Display Brightness
1 Press SETTINGS at the center bottom of the
main screen, and press Brightness.
2 Adjust the display brightness by pressing and
dragging the dot across the bar, by tapping
anywhere on the bar, or by pressing + or –.
3 Press OK.
Power Levels
1 Press SETTINGS at the center bottom of the
main screen, and press Power Levels.
2 Choose between 17 levels and 9 levels. (the
output of each maximum level is the same).
3 Press OK.
Language Selection
Set the display language to English, Spanish, or
French.
Selecting a Language
1 Press SETTINGS at the center bottom of the
main screen, and press Language Selection.
2 Select the desired language.
3 Press OK.
Volume
Adjust the volume of the cooktop controls.
Setting the Volume
1 Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen, and press Volume.
2 Select MUTE, LOW, or HIGH.
3 Press OK.
Program Update
Once the appliance is connected to a home Wi-Fi
network, use this setting to check for available
programming updates and install them.
1 Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen, and press Program Update.
Factory Data Reset
This function returns all settings to the factory
defaults.
1 Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen,and press Factory Data Reset.
2 If you want to reset data to the factory
defaults, press RESET and then OK.
NOTE
• All stored data will be deleted.
Open Source License
This screen contains open source software
licensing information.
1 Press SETTINGS at the center bottom of the
main screen and swipe to the second settings
screen.
2 Press Open Source License.
Before Using the Cooktop
Before using the cooktop for the first time, clean it
thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
Cleaning instructions in this guide. This will help
protect the ceramic surface and make future
cleanup easier.