Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Before Installing
- Installing the Cooktop
- Electrical Connections
- Important Safety Instructions
- Providing the Electrical Connection
- Electrical Requirements
- Electrical Connection
- Where Local Codes Permit Connecting the Appliance-Grounding Conductor to the Neutral (White) Wire
- If Cooktop is Used in a New Branch Circuit Installation (1996 NEC), Mobile Home, Recreational Vehicle, or where Local Codes Do Not Permit Grounding to the Neutral (White) Wire
- Installing the Cooktop Unit
- Final Check
- Electrical Connections
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
29OPERATION
ENGLISH
wait 30 seconds or press the Clean Lock icon for 1
second.
Timer
Kitchen Timer
The Kitchen Timer acts as a simple timer and does
not turn off the cooking zone. It is not tied to any
specific cooking zone. When the set time has
passed, it sounds an alarm.
• Press the Kitchen Timer icon. Scroll (or use the
keypad icon) to set the desired hours, minutes,
and seconds, then press OK.
• When the set time has passed, a popup screen
with "Timer finished" appears with the alarm
sound.
Cooking Timer
The Cooking Timer also acts as a simple timer and
does not automatically turn off the cooking zone.
This timer can be set for each cooking zone, and
sounds an alarm when the set time has passed.
• If the cooking zone is in use, press the Cooking
Timer icon on the active cooking zone. Scroll (or
use the keypad icon) to set the desired hours
and minutes, then press OK.
• When the set time has passed, a popup screen
appears with the alarm sound.
•Press YES to turn off the cooking zone.
WARNING
• The Timer function does not automatically turn
off the cooktop or cooking zones. Be sure to
press the POWER key to turn the cooktop off
after cooking.
Automatic Power Level Control
The power level displayed may be different from
the actual power level at the high end of the
temperature range. To prevent the cooktop from
overheating, the power level is controlled
automatically.
NOTE
• Power Cycling
- It is normal for heating elements to cycle On/
Off during use to control output power.