Owner’s Manual

30 OPERATION
Cookware Heating Index
The cookware heating index can be used to
determine if a container will heat well on an
induction burner.
• The heating index may vary due to conditions
such as voltage, cookware size, or cookware
temperature. Use cookware with a bottom
diameter that is suitable for the burner size.
• The heating index may vary depending on the
burner.
• The cookware heating index displayed on this
product is based on internal manufacturer
standards. Environmental conditions may cause
inaccurate or variable results. Use the results
only as a reference point.
Using the Heating Index
1 Turn off all burners.
• If more than one burner is running, this
function will not work.
2 Place the cookware on the burner you want to
use.
• Place cookware in the center of the burner.
3 Set the output level to 9.
4 Long press (more than 3 seconds) on the
power level area to display the cookware
heating index.
a Long press (more than 3 seconds) on level
9.
b The cookware heating index is displayed.
a No heating
b Low
c High
• The higher the index, the better the
cookware heats up (in the range of 0 to
100%, in 10% increments).
• If the index is low, check the material, size
and shape of the cookware base.
- Even if the cookware has an IH mark, if
the index is low it may not heat properly
on this appliance.
Index
(%)
0
1
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
9
0
1
0
0
Heating