Colour Television OWNER'S MANUAL Please read this manual before operating your carefully set. Retain it for future reference. Record model number and serial number of the set. See the label attached to the back cover and quote this information to your dealer when you require service.
Contents Installation 3 Location and function of controls Remote control handset Battery installation Control panel 4 Basic operation On and off Programme selection Volume adjustment Mute function On screen language selection(option) 7 On 8 screen menus Menu selection TV stations Auto programme tuning / Manual programme Fine tuning / Programme edit 10 Setting up Picture adjustment 13 Sound adjustment Sound adjustment Stereo/Dual reception NICAM reception (option) Sound output selection 14 O
Installation Power This set operates indicated on on the label an AC mains on the back the set. To protect your set from please pull out the mains plug and the voltage is as apply DC power to damage during thunderstorms, aerial plug. supply, cover. Never Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Service Never remove the back high voltage properly, unplug it very cover of the set as this can expose you to and other hazards.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the control panel of the set. Remote control handset Before you use the remote control batteries. See the next page. POWER 1 2 MUTE 1. handset, please install the POWER switches the set on from standby or off to standby. 3 123 2. TV/AV 4 MUTE switches the sound on or off. 456 MENU 3.
Location and function of controls 9. TV/AV selects TV or AV mode. 10. MENU selects 11. Δ / Ε a menu. (Programme Up/Down) on from standby. switches the set selects Φ / Γ a programme or a menu item. POWER MUTE (Volume Down/Up) adjusts adjusts the volume. menu settings. 123 OK TV/AV 9 MENU 10 VOL 11 456 accepts your selection or displays the current mode. 789 12. TELETEXT BUTTONS These buttons For further are details, (option) see PR 0 used for the teletext.
Location and function of controls Control panel CF-25/29B20 series CF-25/29C44 series Front AV3 VIDEO POWER AUDIO L/MONO R S-VIDEO MENU OK VOL ST-BY PR STAND BY 3 12 45678 9 189 AV3 VIDEO Side S-VIDEO L-AUDIO-R MENU 1 3 2 OK PR VOL 4567 89 7 PR CF-25/29C60 series PR PR VOL VOL PR 6 VOL VOL AV3 VIDEO (L/MONO)-AUDIO-(R) MENU S-VIDEO OK VOL 5 PR OK OK MENU MENU 4 S-VIDEO POWER STAND-BY S-VIDEO 3 R AUDIO R AUDIO AV3 1 3 2 456789 VIDEO CF-25/29C7
Basic operation On and off 1. Press the main power button on the set, the set then switches on. 2. If the set is in the set 3. on on. Press the POWER button The set reverts to more. 4. press the POWER, Δ / Ε or the remote control handset to fully switch standby mode, NUMBER buttons on the remote control handset once standby. Press the main power button on the set again. It switches the POWER MUTE set off.
On screen menus The an dialogue operator also between you and your set takes place on screen with The buttons required for the operating steps are menu. displayed. Menu selection 1. 2. press the MENU button to display each Press the Δ / Ε button to select a menu item. Repeatedly The selected 3. menu item menu. changes from green to magenta. change the setting of a menu item Press the Φ / Γ button to OK button to display the sub menu.
On screen menus FINEOOTUNING AUTOOOPROGRAM MANUALOSEARCH FINEOTUNINGOOO{{{ PROGRAMOOEDIT ¡Δ, ΕTMOTOOSELECT ¡Φ, ΓTMOTOOADJUST ¡OKTM,OOTOOSTART ¡OKTMOO,TOOSTORE MENU 5 AUTO PROGRAM OOOOOOOOOOOO{{{ OOOOVHF_LOOOOOOOOOOPROO1 OOOOOOO¡OKTMOO TOOSTOP MENU TV PROGRAMME PR PROGRAMOO01 MENU 1 BANDOOOOOVHF_L VOL SEARCH OK VOL STORE PR ¡Δ, ΕTMOTOOSELECT ¡Φ, ΓTM,TMTOOCHANGE < PR.UU1UUUPR.U__ > O SKIPUUUUUUUU:OFF ¡Δ, ΕTMOTOOSELECT ¡Φ, ΓTMTMTOOCHANGE ¡OKTM,OOTOOEXCHANGEO¡0..9TM Note a. b.
Setting up Up MENU 5 to 80 TV stations numbers FINEOOTUNING able to AUTOOOPROGRAM TV stations (0 use to 79). be stored in this set can Once you have the Δ / Ε NUMBER buttons to or by programme preset the stations, you will be scan the stations MANUALOSEARCH PROGRAMOOEDIT ¡Δ, ΕTMOTOOSELECT you programmed. Stations can be tuned using Auto programme tuning an automatic or a manual mode.
Setting up Manual programme TV stations tuning MENU 5 FINEOOTUNING Manual programme lets you manually tune and arrange the stations in whatever order you desire. 2. Repeatedly press the MENU button to select MENU 5. Press the Δ / Ε button to select MANUAL SEARCH. 3. Press the OK button to 1. display AUTOOOPROGRAM MANUALOSEARCH PROGRAMOOEDIT ¡Δ, ΕTMOTOOSELECT ¡OKTM,OOTOOSTART the MANUAL SEARCH mode. PROGRAMOO01 BANDOOOOOVHF_L SEARCH STORE 123 ¡Δ, ΕTMOTOOSELECT ¡Φ, ΓTM,TMTOOCHANGE 456 4.
Setting up Programme MENU 5 FINEOOTUNING TV stations edit This function enables you to rearrange the programmes stored by auto programming in whatever order you desire. Also you can skip AUTOOOPROGRAM MANUALOSEARCH PROGRAMOOEDIT particular programme numbers stored by auto programming. ¡Δ, ΕTMOTOOSELECT 1. ¡OKTM,OOTOOSTART 2. 3. Repeatedly press the MENU button to select MENU 5. Press the Δ / Ε button to select PROGRAM EDIT. Press the OK button, and the PROGRAM EDIT mode will appear. < PR.
Picture adjustment MENU 1 You can adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC input only) as you prefer. CONTRASTOOOO100OOOO BRIGHTOOOOOOO50O press the MENU button to select MENU 1. 2. Press the Δ / Ε button to select the desired picture item. 1. Repeatedly 3. Press the Φ / Γ button to make At this setting 4. COLOROOOOOOOO50 SHARPNESSOOOO50OOOOOOO appropriate adjustments. point you can complete your adjustments for immediate recall by following steps 4 to 6.
Sound MENU 2 TREBLEOOOOOOO50OOOO BASSOOOOOOOOO50OO BALANCEOOOOOOO0OOOOO SURROUNDOOOOOFFOOOOO SUPEROWOOFEROONOOOO Sound You can adjustment adjustment adjust the sound hall and super woofer ¡Δ, Ε, Φ, Γ, OK, MENUTM treble, bass, balance, surround and super woofer (or Ultra Bass Booster) as you prefer. The surround sound creates the sound effect surrounded around as in a concert (or UBB) stresses and emphasizes heavy sound. 2. press the MENU button to select MENU 2.
Sound NICAM adjustment reception (option) If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Compressed Audio Multiplexing) digital sound can be received. Sound output can be selected according to type of the received broadcast as follows by pressing the DUAL button repeatedly. 1. When NICAM NICAM 2. is mono FM or received, you FM MONO. If the stereo can select MONO can signal is select STEREO weak, switch to mono.
Other functions MENU 3 LANGUAGE[ ±≠ ] :ENGLISH INPUTOOOOOOOOOO:TV TV and AV modes be set for TV CHILDOLOCKOOOOO:OFF Inputs SOUNDOSYSTEMOOO:BG¡5.5TM video cassette recorder COLOROSYSTEMOOO:AUTO NOISEOREDUCTION:OFF can or AV mode. AV mode is used when (VCR), or other equipment a is connected to the set. ¡Δ, ΕTMOTOOSELECT Note ¡Φ, ΓTM,TMTOOCHANGE : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. 2. 3.
Other functions Colour system This set is normal setting adjusted system in your area. Under circumstances, select AUTO. If necessary (if input signal is weak), change the colour 1. Repeatedly press the MENU button to select MENU 3. 2. Press the Δ / Ε button to select COLOR SYSTEM 3. :ENGLISH LANGUAGE[ ±≠ ] for the main TV system by using the instructions below. MENU 3 INPUTOOOOOOOOOO:TV CHILDOLOCKOOOOO:OFF SOUNDOSYSTEMOOO:BG¡5.
Time setting Clock MENU 4 CLOCKOSSET The clock ONOOTIMEOSET the 24 hour uses time before OFFOTIMEOSET operating system, and must be set to the correct the set. AUTOOSSLEEP 1. ¡Δ, ΕTMOTOOSELECT 2. ¡OKTM,OOTOOSET press the MENU button to select MENU 4. Press the Δ / Ε button to select CLOCK SET. Repeatedly 3. Press the OK button to 4. Select and adjust hour and minute Φ / Γ buttons. 5. Press the OK button to start. display the sub menu.
PIP Option: PIP is optional function, so that operation (option) the set with PIP function only can operate. PIP the (Picture same in Picture) displays time you can a within picture a picture. Thus, at watch two different programmes. On and off Press the PIP button to switch Press this button Input again sub on a picture. to switch it off. mode selection for sub picture Press the INPUT button while the sub main picture remains within the picture.
Teletext Teletext is system an can (option) optional function, therefore only set with the teletext by using the teletext receive the teletext broadcast buttons. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the LIST, TOP and FASTEXT modes.
Teletext Programming a (option) colour button Four teletext page numbers of your choice can be colour coded and easily selected by pressing the corresponding coloured button on the remote control handset. 1. Using the NUMBER buttons, select the page you wish to programme. 2. Wait until the page is displayed on the screen and press the OK button. The page numbers in the colour boxes along the bottom of the change screen Press to ">000?". coloured button to store the page number.
Teletext Special G (option) teletext functions REVEAL Press this button to such Press this button the 6 to again Press again to return to the normal STILL the display. UPDATE Displays the the TV picture on the screen while for waiting teletext page. The display will appear at the left hand corner of the screen. When the updated new HOLD will display Press this button to view the 7 the information from (SIZE) height text. this button to enlarge the top half of the page.
Connection of external You can connect additional equipment, such as equipment VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket on MONO the back of the set. 2. OUTPUT Connect the aerial cable to the RF aerial in socket of the VCR. 3. Store the VCR channel desired programme number using the 'Manual programme tuning' section. 4.
Troubleshooting check list Symptoms No picture, no Sound sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Check these items and try to these adjust The mains switched plug-(plugged on) Is the TV switched Try in and on another channel (weak signal) Check aerial (plugged into Check aerial (broken lead?) TV?) Check aerial Check for local interference Adju
