Owner's Manual

Contrast Control
Adjust
the
display
to the contrast desired. Move the thumbwheel
located beneath this indicator to increase or decrease the
display
contrast.
Power(DPMS)
Indicator
This Indicator
lights up green
when the monitor
operates normally.
If
the monitor is
in DPM
(Energy Saving)
mode
(stand-by/suspend/
power off),
this indicator color
changes
to amber.
Power ON/OFF Button
This button is used to turn the monitor on and off.
On Screen
Display
(OSD)
Control
Adjustment
Making adjustments
to the
image
size,
position
and
operating
parameters
of the monitor are
quick
and
easy
with the On Screen
Display
Control
system, using only
the Enter button and
Adjustment
Control knob.
A
quick example
is
given
below to familiarize
you
with
the use of the controls.
Following
this section is an outline of the
available
adjustments
and selections
you
can make
using
the OSD.
Note
:
(Monitor
and PC should be
ON,
with an
image
or
prompt
on
the
screen).
A
single press
of the
ENTER
button
will
present you
with
the Main Menu of the on screen
display system
with the first
( )
highlighted.
1.
The OSD
system
should look like:
2.
To
adjust
H
Size
( ),
Press the enter button
( )
once.
The
display
will
look like:
When
you
are
done,
Press the
EXIT
button
( )once
to return to
main menu to make another selection.
11
CONTRAST
91.1kHz / 85Hz
100%
SEL:
:ENT
H SIZE
OSD
ADJ:
:
H SIZE
120
91.1kHz / 85Hz
OSD