Owner's Manual

Self
Diagnostics
The Studioworks 99T has a SELF DIAGNOSTICS OSD feature that
pops up
when there
may
be
possible
causes of
non-operation.
The
OSD would
highlight
a
possible
reason the
display
is not
showing
an
image.
An
example
of this
may
be when
you
turn on the monitor with
no
signal
cable attached. The monitor
will
display
the SELF
DIAGNOSTICS OSD with the CHECK INPUT SIGNAL. This would be
a clue for
you
to check the
signal
connections.
DDC
(Display
Data
Channel)
DDC is a communication channel over which the monitor
automatically
informs the host
system (PC)
about its
capabilities.
This
monitor has three DDC
function; DDC1,
DDC2B.
DDC1 and DDC2B
carry
out uni-directional communication between
the PC and the monitor. Under these
situations,
the PC sends
display
data to the monitor but not commands to control the monitor
settings.
NOTE
:
PC must
support
DDC functions to do this.
If
you using
the 5 BNC connector with other
types
of video
cards,
this monitor has not
support
DDC function.
Low Radiation
Compliance
(MPR II)
This monitor meets one of the strictest
guidelines
available
today
for
low radiation
emissions,
offering
the user extra
shielding
and an
antistatic screen
coating.
These
guidelines,
set forth
by
a
government
agency
in
Sweden,
limit the amount of emission allowed
in
the
Extremely
Low
Frequency (ELF)
and
Very
Low
Frequency (VLF)
electromagnetic range.
17
NO SIGNAL DETECTED