Operation Manual

Operating 29
Operating
3
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, USB1, AUX, FM)
1. Connect the USB device to the unit.
2. Press F to select a function you want to record.
3. Start the recording by pressing USB REC on the
remote control or USB REC / DEMO on the unit.
Function Status Result
CD, USB
Play/Pause Recorded until stop
Resume stop
(Page 32)
Quick recorded the latest
song
Full stop
Quick recorded All songs
In case below, scope is
limited.
- After File search (Page
18), quick recorded an
indexed song
- Only while the Folder
name is displayed on the
display window, quick
recording All songs on
Folder. (Folder Search
Mode is released when
there is no button input
for a few seconds after
entering the folder
search mode.) (Page 18)
- After the JUKE BOX
On (Page 29), quick
recorded All songs of
JUKE BOX.
AUX,
FM
- Recorded until stop
- If you connect both USB1 and USB2, press
USB REC on the remote control or
USB REC / DEMO on the unit when USB1 or
USB2 which you want to record blinks in the
display window.
To stop recording
To stop recording, press and hold USB REC on the
remote control or USB REC / DEMO on the unit for
3 seconds. Otherwise, the recording continues.
Pausing recording
During CD/USB playback or pause, or external sound
source recording, press USB REC on the remote
control or USB REC / DEMO on the unit to pause
recording. Press it again to restart recording.
To select recording bit rate
1. Press and hold USB REC on the remote control
or USB REC / DEMO on the unit for 3 seconds.
2. Press C/V to select a bit rate.
3. Press USB REC on the remote control or
USB REC / DEMO on the unit to finish the
setting.
The making of unauthorized copies of
copy-protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights