ENGLISH OWNER’S MANUAL Micro Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference. CM3430B CM3430W CM3430G CM3330W-FK_DAUSLLK_ENG.
1 Getting Started 2 Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. yy The appliance is not intended for use by young children or infirm persons without supervision. yy Young Children should be supervised to ensure that they do not play with appliance. yy If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
Getting Started LG Bluetooth Remote 1 Getting Started You can control this player with your iPhone or Android phone via Bluetooth. This player and your phone must be connected to Bluetooth. Visit “ Apple App Store” or “Google Android Market (Google Play Store)” . And use this QR code to search for “LG Bluetooth Remote” app. For detailed information, refer to the 25 page. CM3330W-FK_DAUSLLK_ENG.
Table of Contents Table of Contents 1 Getting Started 2 4 6 6 7 8 10 10 11 Safety Information LG Bluetooth Remote Unique Features Accessories Playable file Requirement Remote Control Front Panel Rear Panel Connecting the AC adapter 2 12 12 13 15 15 16 16 17 17 17 17 18 18 18 18 18 18 19 19 19 19 20 20 20 20 21 22 22 22 22 23 24 25 27 28 31 – Using your player as an alarm clock Advanced Operation – Recording on USB – To select recording bit rate and speed Using a Bluetooth wireless technology – Listen
Getting Started Unique Features 1 USB Direct Recording Accessories Please check and identify the supplied accessories. Getting Started Records music to your USB device. Portable In Listens to music from your portable device. (MP3, Notebook, etc) Remote Control (1) Battery (1) AC adapter(1) Power cord(1) Timer Sets alarm which go off at desired time. Time Sync Sets your unit’s clock automatically by using your Bluetooth device.
Getting Started Playable file Requirement MP3/ WMA/FLAC file compatibility with this unit is limited as follows : yy S ampling frequency : MP3 : within 8 to 48 kHz WMA : within 8 to 48 kHz FLAC : within 8 to 96 kHz(USB), within 8 to 48 kHz(CD) it rate : within 8 to 320 kbps (MP3), yy B 40 to 192 kbps (WMA) yy Maximum files : Under 999 yy File extensions : “.mp3”/ “.wma”/”.
Getting Started Remote Control a specified time. REPEAT(MENU) : - Listens to your tracks/files repeatedly or randomly. - Move to the previous menu when you select USB function to play iPod/iPhone/iPad. 1 Getting Started DELETE : Deletes MP3/WMA/FLAC files. (USB only) Y/U (Skip/Search) : - Skips Fast backward or Forward. - Searches for a section within a track/file. TUNING-/+ : Selects the radio stations. IENTER : - Stops playback or recording. - Cancels DELETE function.
Getting Started Battery Installation You have two ways to open the battery compartment. 9 3. Put the battery compartment on the remote control and turn it clockwise to close. 1. Turn the battery compartment counterclockwise by using a coin or your finger. Then take a battery compartment out. 1 Getting Started >>Caution If you have long nails, do not open the battery compartment by using your finger. Or else, your nail would be broken.
Getting Started Front Panel 1 Getting Started a Speaker b 1/!(Power ON/OFF) Switches the unit ON or OFF. F(Function) Selects the function and input source. T(Play/Pause) - Starts and pauses playback. - Selects Stereo/Mono. I(Stop) Stops playback. -/+ (Volume) Adjusts volume level. R (Insert/Eject) Inserts or ejects a disc from a slot loader. c Display Window d Disc slot Loads a disc. Rear Panel a FM ANT. Connects the FM wired antenna. b (AirPlay) Connects your unit to the existing Wi-Fi network.
Getting Started >>Caution Precautions in using the touch buttons yy Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons. Connecting the AC adapter 1. Connect the supplied AC power cord to the AC adapter. 2. Connect the AC adapter cable to DC IN adapter input. 3. Plug the AC power cord into an AC outlet. 1 Getting Started yy Use the touch buttons with clean and dry hands.
Operating Basic Operations iPod/iPhone/iPad Operation You can enjoy the sound with your iPod/iPhone/ iPad. For details about iPod/iPhone/iPad, refer to the iPod/iPhone/iPad User Guide. 2 1. Connect iPod/iPhone/iPad to the USB port by using the iPod/iPhone/iPad’s cable.
Operating ,,Note yy If iPod/iPhone/iPad operation has an error, check these problems as follows; - Your iPod/iPhone/iPad is not connected firmly. - This unit recognizes your iPod/iPhone/ iPad as an unknown device. - Your iPod/iPhone/iPad is exceptionally low in power. yy Depending on your iPod/iPhone/iPad ’s software version, it may not be possible to control your iPod/iPhone/iPad from this unit. We recommed installing the latest software version.
Operating To Do this Play yy If the USB connection has an error, check these problems as follows; Press T. Pause During playback, pressT. During playback, press Y/ U to go to the next file or to return to the beginning of the current file. During playback, press Y twice briefly to step back to the previous file. 2 Operating Skip When you selects USB function, you can see messages as follows; Message USB Cause Your device is not supported by AOA 2.
Operating USB Operation Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the unit. To Stop Playback Pause 1. Choose a different function/mode or press IENTER on the remote control or I on the unit twice in a row. 2. Remove the USB device from the unit. CD Operation 1. Insert a disc in the disc slot with the label side upward. 2. Select the CD function by pressing FUNCTION on the remote control or F on the unit. 3.
Operating Listening to music from your portable device Listening to music with your headphones The unit can be used to play the music from many types of portable device. (Portable cable is not supplied as an accessory with this unit.) Connect a pair of stereo headphones ( 3.5 mm phone plug) to PHONES jack on the unit for private listening.(Headphones are not supplied as an accessory with this unit.) 2 Operating 1. Connect the portable device to the PORT. IN connector of the unit. 2.
Operating Other Operation Programmed Playback The program function enables you to store your favourite tracks/files from any disc or USB device. ,,Note yy USB/CD Folders/Files are recognized as below ROOT FOLDER FOLDER3 1. Insert a CD or connect USB and wait for it to be loaded. FILE 5 FILE 6 2 FILE 7 FOLDER4 3. Press Y/U on the remote control to select a next track/file. FOLDER7 FILE 8 FOLDER8 FILE 10 FILE 9 FILE 3 4. Press PROGRAM/MEMORY again to save and select a next track/file.
Operating Deleting an MP3/WMA/FLAC file You can delete file, folder or format by pressing DELETE on the remote control. This function is supported only in stop state. (USB only) 1. - Select the file you want to delete by using Y/U . And press DELETE. 2 Operating - Select the folder you want to delete by pressing PRESET/FOLDER W/S. Then press DELETE. - Press and hold DELETE to format the USB device. Or Press DELETE repeatedly while searching a file.
Operating Sound adjustment Radio Operation Setting the sound mode Antenna Connection This system has a number of pre-set sound fields. You can select a desired sound mode by using SOUND EFFECT on the remote control. 19 Connect the FM Wire antenna to FM ANT. connector. The displayed items for the Equalizer may be different depending on sound sources and effects. Description NATURAL You can enjoy comfortable and natural sound.
Operating Listening to the radio Presetting the Radio Stations 1. Press FUNCTION on the remote control until FM appears in the display window. The last received station is tuned in. You can preset 50 stations for FM. Before tuning, make sure to turn down the volume. 2. Auto tuning : Press and hold TUNING-/+ for about 2 seconds until the frequency indication starts changing, then release. Scanning stops when the unit tunes in a station. 2 Manual tuning : Press TUNING-/+ repeatedly. Operating 3.
Operating Setting the Clock Setting the clock by synchronizing your iPod/ iPhone/iPad You have three ways to set the clock. Connect iPod/iPhone/iPad to the USB port using the iPod/iPhone/iPad’s cable and select USB function. Then the clock setting in the display window will be synchronized with your iPod/ iPhone/iPad. Setting the clock by pressing the buttons 1. Turn the unit on. 2. Press and hold CLOCK. - 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4.
Operating Using your player as an alarm clock 1. Turn the unit on. 2. Press and hold TIMER to set the alarm function. 3. Alarm sound sources will blink. While each of sound sources blink, select the one you want by pressing IENTER or SET. 2 Operating 4. “ON TIME” will blink. This is your desired time to turns unit on. Press Y/U to change the hours and minutes and press IENTER or SET to save. 5. The “OFF TIME” will blink. This is your desired time to turn unit off.
Operating 23 ,,Note yy You can check the recording percentage rate for the USB record on the display window during the recording. (AUDIO CD, MP3/ WMA/ FLAC CD Only) Using a Bluetooth wireless technology yy During recording MP3/ WMA/ FLAC, there is no sound. About Bluetooth yy When you stop recording during playback, the file that has been recorded at that time will be stored. (Except for MP3/WMA/ FLAC files) The available range is within 10 meters.
Operating Listening to music of a Bluetooth device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 2 Operating 1. Select the Bluetooth function by using the FUNCTION on the remote control or F on the unit. “BT READY” appears in the display window. 2. Operate the Bluetooth device and perform the pairing operation.
Operating 25 Using LG Bluetooth Remote app Install “ LG Bluetooth Remote app ” by using QR code About LG Bluetooth Remote app 2. Tap an icon for installation. 3. Tap an icon for downloading. 2 Operating LG Bluetooth Remote app bring a suite of new features to your unit. To enjoy more features, you are recommended to download and install free “ LG Bluetooth Remote”. 1. Install “ LG Bluetooth Remote app” by using QR code. Use the scaning software to scan the QR code.
Operating ,,Note yy BT app will be available in the software version as follow; Android O/S : Ver 2.3.3(or late) iOS O/S : Ver 4.3(or late) 2 yy While using Bluetooth, you may not activate BT app. Disconnect Bluetooth device you have connected before to use BT app properly. Operating yy If you use Bluetooth app for operation, there would be some differences between Bluetooth app and the supplied remote control. Use the supplied remote control as necessary.
Operating 27 Using AirPlay Apple AirPlay technology enables you to play your iTunes music library, hosted on a Mac, PC, iPhone, iPod touch, or iPad on any AirPlay-enabled device connected to the Wi-Fi network. To stream audio wirelessly by AirPlay, you need : Wi-Fi Sharing Compatible Apple Device Air Direct iPad mini, iPad4, iPad3, iPad2, iPad, iPhone5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch 5G, iPod touch 4G, iPod touch 3G Ver.4.3.3(or later) Ver.10.2.
Operating Connecting your Wi-Fi device to Wi-Fi network Option 1 : Using Wi-Fi Sharing ,,Note 2 Make sure that you set security mode to WPATKIP or WPA2-AES to connect the network more quickly. Operating 1. Connect your iPod touch/iPhone/iPad to the network. 2. Press FUNCTION on the remote control or F on the unit to select AIRPLAY function. Option 2 : Using Air Direct without security 1. Press FUNCTION on the remote control or F on the unit to select AIRPLAY function. 2.
Operating 29 Using Air Direct with Security mode 5. Launch Apple Safari browser or Microsoft Internet Explorer browser on your iPod touch/ iPhone/iPad or PC/MAC. 6 Type in “192.168.1.1” at the browser address bar and confirm. 7. Set security mode and insert password. - Hexadecimal (0-9, A-F) 10 or 26 digits. - 5 or 13 ASCII characters. 8. Tap or click “OK”. ,,Note yy If you want to deactivate Air Direct function, press Air Direct/Reset.
Operating ,,Note yy If “LG AUDIO Setup XXXXXX” is not in the list, try to scan the available Wi-Fi networks again. yy If you want to deactivate Webpage function, press and hold until “AIRPLAY” message appears in the display window. 2 Operating 5. Launch Apple Safari browser or Microsoft Internet Explorer browser on your iPod touch/ iPhone/iPad or PC/MAC. 6. Type in “192.168.1.111” at the browser address bar and confirm. 7. Select your network name (SSID) from “Wireless Network”. 8.
Operating Streaming audio from your iTunes music library to this unit 2. Tap on the AirPlay icon 31 . ,,Note Make sure that your iTunes host device is connected to the same Wi-Fi network as this unit. Your iTunes device can be an iPod touch/ iPhone/iPad installed with iOS 4.3.3 (or later) or a Wi-Fi enabled PC/Mac installed with iTunes 10.2.2 (or later). 2 Operating Stream from your iPod touch/ iPhone/iPad 1. Launch the “Music” application on your iPod touch/iPhone/iPad. 3.
Operating 4. Select a media file and start play. -- After a while, you will hear music from this unit. -- Depending on your connection environment and network condition, audio output may be delayed. 2 Operating ,,Note If you fail to hear music after successful setup, do one of the following on your iPod touch/ iPhone/iPad: yy Disconnect and then re-connect to the same Wi-Fi router again. yy Close all applications running at the background.
Troubleshooting 33 Troubleshooting Problem No Power. No sound. Correction yy Plug in the power cord. yy Check the condition by operating other electronic devices. Press F and check the selected function. yy Insert a playable disc. The unit does not start playback. yy Clean the disc. (Refer to the 36 page) 3 yy Insert the disc with the label or printed side facing upward. Troubleshooting yy Connect the antenna securely. Radio stations cannot be yy Tune to the station manually. tuned in properly.
Appendix Trademarks and Licenses “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
Appendix 35 Specifications General AC adapter requirements DC IN 18 V 0 2.67 A, 100 - 240 V ~ 50 - 60 Hz Power consumption Refer to the main label. Dimensions (W x H x D) 520 x 87 x 180 mm Net Weight (Approx.) 3.7 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Bus Power Supply DC 5 V 0 2100 mA Inputs PORT. IN 0.5 Vrms (3.5 mm stereo jack) Tuner FM Tuning Range 4 87.5 MHz to 108.0 MHz or 87.50 MHz to 108.
Appendix Maintenance Notes on Discs Handling Discs Never stick paper or tape on the disc. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs 4 Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
CM3330W-FK_DAUSLLK_ENG.
CM3330W-FK_DAUSLLK_ENG.